SS Toilet Tank Chain , Stamping Forming Toilet Chain Hook Aging Resistant

Product Specification

The water tank fittings stainless steel chain, the water tank cover to install the anti-slip hook

Toilet hook

Specific implementation methods:

As shown in figure 1, a special toilet hook, including hook body 1, fixed frame 2, and basket 3;The hook body I consists of two metal rods;The cross section of the two metal rods in a certain direction is "b";The fixed frame 2 is fixed at the top of the hook body I;The fixed frame 2 is an internal hollow rectangular shape, and its underside comprises a number of holes, with a mesh or hole in the side.

Described in the fixed frame 2 0.5 3 cm, the diameter of the underside was cleaning the toilet is easy to melt, if the hole diameter is too big, can lead to direct fall into the water tank cleaning the toilet or directly down, with the current wasteful.

Carrying basket described [0012] 3 fixed on the top of the hook I described a, described and described in the fixed frame and rear basket of 3, 2, respectively, located in the "b" type hook I two top, described in the carrying basket can be placed in 3 some toilet articles, such as toilet paper, such as the form is received.

[0013] 3 r basket including hole, described in the holes match with the tip of the hook I described, described in the hook I described through holes are connected to the mentioned carrying basket 3 activities, facilitate change regularly, clean the carrying basket 3.

[0014] the above is only a good embodiment of the invention, so it cannot be limited to the scope of the present invention.

A kind of toilet special hook, its characteristic is to include hook body, fixed frame;The hook body comprises two metal rods;The cross section of the two metal rods in a certain direction is "b";The fixed frame is fixed to a top of the hook body;The fixed frame is the internal hollow rectangular shape, and its underside comprises a number of holes, with a network or hole in the side.2. According to claim 1 toilet special hook, it has the following characteristics is the fixed frame bottom hole diameter is 0.5 _3cm03. According to claim 1 the toilet is special, its characteristics is also includes carrying basket, carrying basket described the top hook a fixed in stated, and carrying basket, described in the fixed frame described in "b" type hook of the top two.4. According to claim 3, the toilet is special, it has the following characteristics is the carrying basket including hole, described in the holes match referred to the top of the hook, hook described described through holes connected with carrying basket activities described.

How does the toilet water tank leak repair?

1.First of all, we will open the toilet tank, and we will see what level the tank is on when the tank is full of water.If the water is full and the tank is still in the water, it must be leaking.

2.We use water to pull the top and bottom of the gourd, to watch the level of the gourd gourd, if there is a bad, or difficult to move, then it is to announce that the device has broken down.Remember to place the gourd in a bit, not too high.

3. Remove the equipment of the ladle and clean it. If you do not understand it, put the water in the water tank directly, and use detergent and washing powder to clean it once.If this can be used, if not, it needs to be replaced.

4.Check the interface of the stainless steel hose at the position of the tank outside the tank to see if it is not tight or the internal rubber mat is ageing and causing a leak.This must be identified.

5.Internal equipment if it is all right, you will need to check the toilet water tank for impact leads to the problem of craze, if has the effect of external force, the water tank is also likely to be leaking problem.