Single Row Toilet Flapper Valve , One Piece Toilet Drain Valve Replacement

Product Specification

Single Row Toilet Flapper Valve , One Piece Toilet Drain Valve Replacement

Model: S - 406

The overflow pipe is highly customizable.

Installation height: 120-280mm.

Water diameter: 3 "drain diameter.

Plastic flap cover, silicone seal, superior performance.

Stainless steel chain

Suitable for split toilet.

How to unload the drain valve in the toilet tank?

1. First of all, it depends on which type of toilet you are: the conjoined body is a toilet and the water tank is not fixed with screws, the body is a toilet and the water tank is fixed by screws.

2. If the combination is simple, open the water tank cover first and find the screw at the bottom of the drain valve, and the screwdriver can be removed directly.

3. If it is so divided, open the water tank cover and screw down the two screws at the bottom of the tank, and take the water tank down.Then you can remove the large nut of the fixed drain valve.

4. Install the above step and reverse it.

What is the reason that toilet water keeps flowing?How to solve toilet leakage?

The toilet is a very important equipment in our toilet, it also can have a few problems when use, the toilet is leaking is very common one.If toilet appeared leaking condition in the home, you don't be too nervous, should be the residence of the water cut off, and then look for the reasons of leaking to see what was the reason for the leakage, and then began to suit the remedy to the case, today will give you the popular science about toilet water flows have to do, what toilet water solution.

A drain valve, bucket of water flow has been reasons problem of drain valve is in the hands of the toilet water tank of water, check if the above two kinds of reasons not to come out, it should find out the problem of drain valve, in many cases, the problems will make the drain valve, likely because of mounting holes in the cracks and deformation, or when installing a series of problems such as uneven.Water tank material if the material of tank is chosen or aging, can appear a leaking problem, now the toilet industry progress rapidly, the toilet is very much on market, but can't promise some fake and inferior toilet, many businesses in order to make money, to create some others out of toilet, in order to seek more interest, has chosen the inferior materials, the toilet light surface is don't see why a look, they may be some problems in the internal parts, soon will appear the phenomenon of damage, of course, do not rule out some use for a long time in the toilet,Its damage is a natural phenomenon of aging.Water pipe barrels of water flow has been and is likely to be problems caused by water pipe, water pipe is connected directly to the toilet of water pipe, if the reasons of leaking, water pipe is the main reason, the possibility is very large.How to solve the toilet leakage?

1, the toilet is separated from the tank, to check the parts are in good condition, if because of some small parts damaged, can just trim, can't take it to bought a suit, for some too bad water tank, proposed to the water tank is changed, so as to avoid more serious consequences.

2, for the toilet drain the best solution is to check the joint of pipes and the toilet, see if they are loose, or whether the pipeline rotten, if because of the bad if you need to replace the new pipes, if because there is no good, you need to use wire or some material should be fixed can be fixed.

3, if because of the drain valve and cause of leakage is more complex, because it involves some professional knowledge, can special maintenance master to please, so that we can ensure the normal use of the toilet.