Electroplate Toilet Flush Button , ABS Dual Flush Toilet Button Hand Press Type

Product Specification

The electroplate button switch is commonly used to press the button on the toilet button

Every household has a toilet, the toilet will be toilet bowl, but don't know if you have noticed that every toilet water tank cover above is equipped with two buttons, and every time we can only use one after using the bathroom, and the two buttons is stem what of?How should these two buttons be used properly?

Basic principles and objectives:

1, after our urine, we will press the closestool cistern flush on the switch, the flush switch is open, release part of the water wash away the toilet flush the toilet tank in the urine, and then plug will fall to the lowest of the water in the tank, block the outlet, the tap water immediately after added the toilet water tank of water, the toilet will also stop the water, the water floating ball can also follow the toilet water tank water level changes, when the water level rises to some extent floating ball will stop rising, so as to prevent water to the water in the tank with water;

2. How about the floating ball and water in front of us? What's the check on the two buttons on the lid?Actually, these are the two button represents the two drainage class, big key represents a one-time get a tank full of water to put out, and kin is represented by a only half or a third of the water;The design of this size key is designed to reduce waste, so that we can make the water use according to the situation, so as to achieve the purpose of the cancellation.

Why does the toilet water tank cover have two buttons?

1. Press the small button;

The impact force is small, it is more suitable for our urinate, because the urine and water soluble, we just put the water in the toilet, and then into the new water, so the toilet won't because of long time storage urine and peculiar smell;

Why does the toilet water tank cover have two buttons?

2. Long press the small button;

In this way, there is a lot of erosion. He is suitable for the other people to forget to flush after he has defecated, which causes the toilet to be partially deposited in the bottom of the toilet, which can not be washed clean if the water is too little.

Why does the toilet water tank cover have two buttons?

3. Press the big button;

This operation is suitable for solution of shit, but shit quantity is not large, and the water inside the toilet has covered all poo, only need a small amount of water and power is larger is time to put it away;If we had to say a quantity, we could say that this button would be able to flush out 1 to 2 pieces of poop;

Why does the toilet water tank cover have two buttons?

4. Press the big button;

This operation is also used in the solution after defecate, and the impact is bigger, scour is wider, so we can use in my stomach (diarrhea), jieshou after closestool wall there'd be lots of juice stained with glue, so with long press the big key is more appropriate, also easy to wash clean;If it's a normal poo, then it can wash four or five tubs of poop.

Why does the toilet water tank cover have two buttons?

5. At the same time, two keys are pressed at the same time;

The scouring force the foot operation, and its applicable scenario is a time when we have constipation, poo very sticky, easy to stick on the inner wall of the toilet, it is not easy to wash clean, we can use this, if a filling out, with this operation can be washed clean twice.