Payment Terms | L/C, T/T |
Supply Ability | 2000units/day |
Delivery Time | 3 working days |
Packaging Details | Cartons |
Rated Voltage | 220V/110V |
Application | Solar Water Heater Controller |
Model | SR609C |
Color | Gray |
Temperature Range | 0~99℃ |
Electromagnetic Valve | DC 12V AC 220V |
Brand Name | PASSION/OEM |
Model Number | SR609C |
Certification | CE |
Place of Origin | CHINA |
View Detail Information
Explore similar products
SR609C Solar Water Heater Controller With Temperature Display SR1568
SR208C Solar Water Heater Controller Residential Split Pressure Control SR609C
SR288 Intelligent Solar Water Heater Controller for Split Pressurized Solar
ABS Housing Digital Solar Controller SR609C Water Proof Controller
Product Specification
Payment Terms | L/C, T/T | Supply Ability | 2000units/day |
Delivery Time | 3 working days | Packaging Details | Cartons |
Rated Voltage | 220V/110V | Application | Solar Water Heater Controller |
Model | SR609C | Color | Gray |
Temperature Range | 0~99℃ | Electromagnetic Valve | DC 12V AC 220V |
Brand Name | PASSION/OEM | Model Number | SR609C |
Certification | CE | Place of Origin | CHINA |
High Light | DC12V Solar Water Heater Controller ,Pressurized Solar Water Heater Intelligent Controller |
SR609C Intelligent Controller for Pressurzied Solar Water Heater Element Off/On
Introduction:
Suitable for integrated un-pressurized solar system
Main Technical data:
1 Dimension: 210 mm x 145mm x 40mm
2 Self power consumption: <3W
3 Measuring accuracy of temperature: ±2℃
4 Temperature range of measurement: 0~99℃
5 Maximum power of controlled pump: ≤600W
6 Power of accompanied electrical heating wire: ≤800W
7 Power of auxiliary electrical booster ≤2000W ( standard collocation),
≤3000W (not standard selection available )
8 Electromagnetic valve parameter: DC 12V AC 220V
pressurized valve and un-pressurized valve are available for selection
※ operation pressure of pressurized valve: 0.02Mpa ~ 0.8Mpa
suitable for providing water directly
※operation pressure of un-pressurized valve: 0.0Mpa
connected with water tank or low pressure water providing
Main Functions:
1, Time display
2, Water temperature display
3, Water level display
4, Auto mode
5, Water level pre-setup
6, Manual water loading
7, Temperature controlled water loading
8, Timing water loading
9, Water loading when tank is lack of water
10,Compulsive water loading
11,Increasing Water pressure during water is loaded.
12,Manual heating
13,Timing heating
14,Hot water circulation
15,Hot water pipe insulation
16,Low pressure protection
17,Collector tube protection
18,Memory protection when power is failure.
Description
Material of out tank: 0.4mm thickness color steel/ fluorine carbon steel
Material of inner tank: Food grade 1.2mm thickness ,SUS304-2B stainless steel
Tank insulating layer: 55mm 45kg/m³ high-density polyurethane foamed
Inlet and outlet hole: Male G 1/2, 3/4
Max pressure: 0.6Mpa
Solar collector tube: 3.3 Borosilicate glass with N/Al coating
Thickness of glass tube: 1.6mm
Vacuum tube tightness: P≤0.005 Pa
Absorption: as=0.93-0.96(AM1.5)
Emission ratio: εh=0.04-0.06(80C±5C)
Idle sunning property parameters: Y=220~260m2.C/K
Average heat loss coefficient: ULT=0.6~0.7W/(m2.C)
Bracket: 1.5mm thickness Galvanized Steel
Structure of tank: 5 holes for air vent,water inlet and outlet,electric heater,Mag Rod
Welding: Argon arc welding
Fastening pieces: Made of stainless steel screw
Absorber area: 2.125 m²
Tube quantity: 30tubes, 58x1,800mm with heat pipe
Tank capacity: 300L
Pressurized Solar Water Heater Specifications:
Model | PT-H-10 | PT-H-15 | PT-H-18 | PT-H-20 | PT-H-24 | PT-H-25 | PT-H-30 |
Storage Tank | 100L | 150L | 180L | 200L | 240L | 250L | 300L |
Inner Tank | Stainless Steel SUS304 2B/SUS316L | ||||||
Outer Tank | Colored Steel( Sliver/White )/SUS201/SUS304 2B/SUS316L | ||||||
Insulation Layer | High Density Polyurethane Foaming | ||||||
Tube QTY(PCS) | 10 | 15 | 18 | 20 | 24 | 25 | 30 |
Dustproof Rubber | EPDM | ||||||
Dsily Heat Gain | 8.5MJ/m² | ||||||
Work Pressure | 0.6MPa | ||||||
Three Target Vacuum Tube | Diameter/Length: φ58mm/1800mm; High boron and silicon content 3.3; Structure:Gradual change SS-AL-Nx/Cu selective absorption coating; Vacuum Degree:P<=5*10-3; | ||||||
Heat Pipe | Condesor: φ14*70mm; Thickness: 0.5mm ; Material: red copper TU1+water; Transfer Power:>=150W; Working Pressure:4Mpa; Welding Pressure:4Mpa; | ||||||
Bracket | Galvanized Steel with Plastic Coating in Black color/Aluminum Alloy/SUS201/SUS3042B/SUS316L, 0/20/30/45 degrees | ||||||
Contour Aperture Area | 1.23m² | 1.84m² | 2.22m² | 2.47m² | 2.96m² | 3.08m² | 3.70m² |
Aperture Area | 0.95m² | 1.42m² | 1.70m² | 1.89m² | 2.27m² | 2.36m² | 2.83m² |
Absorption Area | 0.82m² | 1.22m2 | 1.46m2 | 1.62m2 | 1.96m² | 2.04m² | 2.43m² |
Accessories(Optional) | T/P Valve,Electrical Heater & Magnesuim Bar | ||||||
OEM Service: | Logo painting on products and package is for free (20FT,40FT,40HQ) |
Remarks:
1. Lead-time:7-15 working days after receiving payment.
2. Payment Term:T/T, L/C, Western Union.
3. Warranty:5 years for the full system, 15 years for the vacuum tube,and 1year for accessories.
4. Trade Term: FOB, CFR and CIF.
System Working Pricinple:
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1996
Total Annual:
3000000-5000000
Employee Number:
100~150
Ecer Certification:
Verified Supplier
JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. is a manufacturer of Solar Water Heater since 1996. As an experienced company, we can provide the perfect solution for Solar Thermal System. Our products include solar water heater, solar collector and accessories. We have advanced technolog... JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. is a manufacturer of Solar Water Heater since 1996. As an experienced company, we can provide the perfect solution for Solar Thermal System. Our products include solar water heater, solar collector and accessories. We have advanced technolog...
Get in touch with us
Leave a Message, we will call you back quickly!