Dongguan Ziitek Electronic Materials & Technology Ltd.
| Supply Ability | 1000KG |
| Delivery Time | 2-3 work day |
| Packaging Details | 1kg/can |
| keywords | Thermal Conductive Glue |
| Hardness @25℃ | 85 Shore D |
| Service temperature | -40℃ to 160℃ |
| Glass transition temperature Tg | 92℃ |
| Elongation | 0.10% |
| Thermal Conductivity | 1.5 W/m-K |
| Dielectric Strength | 300 volts / mil |
| Brand Name | Ziitek |
| Model Number | TIE™ 280-15AB |
| Certification | RoHs |
| Place of Origin | China |
View Detail Information
Explore similar products
High Performance One Component Thermal Conductivity Epoxy Glue For Electronic
Black Two Pats Excellent Insulation 1.5W/m-K Thermally Conductive Adhesive
High Transmittance Low Temperature Conductive Adhesive Glue 0.3W / mK TIS280-03A
2.8W/M-K Grey Silicone Thermal Conductive Glue TIS680-28A/B Two Component 85
Product Specification
| Supply Ability | 1000KG | Delivery Time | 2-3 work day |
| Packaging Details | 1kg/can | keywords | Thermal Conductive Glue |
| Hardness @25℃ | 85 Shore D | Service temperature | -40℃ to 160℃ |
| Glass transition temperature Tg | 92℃ | Elongation | 0.10% |
| Thermal Conductivity | 1.5 W/m-K | Dielectric Strength | 300 volts / mil |
| Brand Name | Ziitek | Model Number | TIE™ 280-15AB |
| Certification | RoHs | Place of Origin | China |
| High Light | Shockproof Two-Component Glue ，Electronic Insulation Thermal Conductive Glue ，LED Driver Thermal Conductive Glue | ||
Two-Component Shockproof Waterproof Electronic Insulation Led Driver Thermal Conductive Silicone Potting Compound AB Glue
TIETM 280-15AB Series is a two-component, high thermal conductive, lowtemperature cured, long pot life, fire resistant Silica encapsulant glue. It is design for potting of capacitors and electrical devices.Their flexibility and elasticity make them suited to the coating of the very uneven surfaces.Heat can transmit to the metal housing or dissipation plate from the separate elements or even the entire PCB, which in effect enhances the efficiency and life-time of the heat-generating electronic components.
TIE280-15AB-Series-Datasheet.pdf
Features
> Good thermal conductive: 1.5W/mK
> Excellent insulation and smoothly sourface.
> Low shrinkage
> Low viscosity, expediting air releaseed.
> Excellent in solvents and water proof.
> Longer life time.
> Excellent thermal shock efficiecy and impact resistance
Application
> Automotive starters potting; General potting Thermal detector potting
> Ferrite adhesion; TIP type LED; Good adhesion to aromatic polyester
> Relay sealant; Good adhesion to rubber, ceramics PCB and plastics
> Power transformers and coils; Potting capacitors Potting of small electrical devices
> Adhesion to metal glass and plastic LCD & substrates adhesion; Coating and sealant; Coil ; IGBTS; Transformer; Fire retardant
> Optical / medical component adhesive
| Typical Uncured Material TIE™ 280-15A (Resin) | |
| Color | Black |
| Viscosity@25℃ Brookfield | 15,000 cPs |
| Specific Gravity | 1.6 g/cc |
| Shelf life @25℃ in sealed container | 12 months |
| TIE™ 280-15B (Hardener) | |
| Color | Black |
| Viscosity@25℃ Brookfield | 7,000 cPs |
| Shelf life @25℃ in sealed container | 12 months n |
| Mix Ratio (By weight) TIE™ 280-15A : TIE™ 280-15B = 1 : 1 | |
| Viscosity @25℃ | 10,000 cPs |
| Working pot life (250 g @25℃) | 45 min |
| Specific Gravity | 1.6g/ccn |
| Cure Schedule | |
| Cure 3 hours at 25℃ 3hours | |
| Cure 30 minutes at 70℃ 30mins | |
| Cured Properties | |
| Hardness @25℃ | 85 Shore D |
| Service temperature | -40℃ to 160℃ |
| Glass transition temperature Tg | 92℃ |
| Elongation | 0.10% |
| Coefficient of thermal expansion, / ℃ | 3.0 X 10-5 |
| Fire resistance UL | Meet 94 V-0 |
| Moisture absorption % wt gain 24 hours water immersion @25℃ | <0.1% |
| Thermal | |
| Thermal Conductivity | 1.5W/m-K |
| Thermal Impedance @10psi | 0.31 ℃-in²/W |
| ELECTRICAL AS CURED | |
| Dielectric Strength | 300 volts / mil |
| Dielectric Constant | 4.2 MHz |
| Dissipation factor | 0.029 MHz |
| Volume resistivity, ohm-cm @ 25℃ | 3.0 X 1013 |
Product packaging
1KG A/B for each tank.
5KG A/B each.
10KG A/B each.
Quality :
Do it right the first time, total quality control
Effectiveness:
Work precisely and thoroughly for effectiveness
Service:
Quick response, On time delivery and Excellent service
Team work:
Complete teamwork, including sales team, Marketing team, engineering team, R&D team, Manufacturing team, logistics team. All is for supporting and servicing a satisfy service for customers.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in China.
Q: How long is your delivery time?
A: Generally it is 3-7 work days if the goods are in stock. or it is 7-10 work days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra cost?
A: Yes, we could offer samples free of charge.
Company Details
Business Type:
Manufacturer
Year Established:
2006
Total Annual:
100000-160000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Dongguan Ziitek Electronical Material and Technology Ltd. provides product solutions to equipment product which generates too much heat affecting its high performance when using. Plus thermal products can control and manage heat to keep it cool to some extent. Ziitek D-U-N-S... Dongguan Ziitek Electronical Material and Technology Ltd. provides product solutions to equipment product which generates too much heat affecting its high performance when using. Plus thermal products can control and manage heat to keep it cool to some extent. Ziitek D-U-N-S...
Get in touch with us
Leave a Message, we will call you back quickly!