Jiangsu Ascendent Optronics INC.
| Payment Terms | T/T |
| Delivery Time | 5-8 work days |
| Detector type | LWIR uncooled focal plane array |
| Resolution | 384x288/640x480 |
| Pixel size | 17μm |
| NETD | <50mk@300K, f1.0 |
| Image frame rate | 50Hz/25Hz |
| Spectral range | 8-14μm |
| Non-uniform correction | Baffle |
| Video output | CCIR / PAL composite video (50Hz) |
| Place of Origin | China |
View Detail Information
Explore similar products
A3817T07 384x288 Uncooled Infrared Thermal Camera Module
Infrared Thermal Imaging Core , Mini Thermal Camera Core A3817S Model
Detector Compact Thermal Camera Module Vanadium Oxide VOx Uncooled A3817 Model
384x288 LWIR Thermal Camera Module A - Si Detector With Circular Circuit Board
Product Specification
| Payment Terms | T/T | Delivery Time | 5-8 work days |
| Detector type | LWIR uncooled focal plane array | Resolution | 384x288/640x480 |
| Pixel size | 17μm | NETD | <50mk@300K, f1.0 |
| Image frame rate | 50Hz/25Hz | Spectral range | 8-14μm |
| Non-uniform correction | Baffle | Video output | CCIR / PAL composite video (50Hz) |
| Place of Origin | China | ||
| High Light | A3817T13 ，13mm Lens Thermal Camera Module ，Temperature Measuring Thermal Camera Module | ||
A3817T13 Temperature Measuring Body Infrared Thermal Camera Module
Part 1. Technical index
Form 1 Technical index of network temperature measuring movement
| Detector | |
| Detector type | LWIR uncooled focal plane array |
| Resolution | 384x288/640x480 |
| Pixel size | 17μm |
| NETD | <50mk@300K, f1.0 |
| Image frame rate | 50Hz/25Hz |
| Spectral range | 8-14μm |
| Video display processing | |
| Non-uniform correction | Baffle |
| Video output | CCIR / PAL composite video (50Hz) |
| Image polarity | Black heat/White heat/Brown/Red heat/Iron red/Rainbow |
| Digital zoom | Follow-up support |
| Brightness | Adjustable |
| Contrast | Adjustable |
| Boot time | <5s |
| Lens | 13mm/19,25mm |
| Interface for thermal imaging movement | |
| Data interface | RJ45(100M Ethernet) |
| Communication control | UART/RS232 LVCMOS 2.5V-3.3V compatible |
| Analog video output | CVBS |
| Digital video | H264 video streaming, support Onvif V2.4 |
| Alarm | GPIO |
| Temperature measurement function | |
| Range of TEMP measurement | 26℃~46℃ |
| Accuracy of TEMP measurement | ±0.2℃(Reference black body), ±0.3℃(Single machine work) |
| Distance of TEMP measurement | <8m |
| Alarm | Support area alarm, support isothermal analysis |
| Secondary development support | Secondary correction, read out part of the spot temperature, read out part of the block temperature |
| Power supply | |
| Range of Voltage | 9-12V |
| Power consumption | <2.5W |
| Environmental parameters | |
| Operating time | 0℃~+30℃ |
| Range of storage TEMP | -45℃~+65℃ |
| Physical | |
| Weight(without lens) | ＜40g |
| Size(mm) | 38x38x35(without lens interface) |
Part 2. Interface definition
1.Interface board socket diagram
2.Socket description
(1) RS485(Ports ofRS485)
| Pin number | Definition |
| 1 | Signal ground |
| 2 | RS485_A(RS485+) |
| 3 | RS485_B(RS485-) |
(2) CVBS(Analog video output)
| Pin number | Definition |
| 1 | VIDEO(Video+) |
| 2 | GND(Video-) |
(3) PWRIN(Power input)
| Pin number | Definition |
| 1 | 12V Power input |
| 2 | Power ground |
| 3 | |
| 4 | Power ground |
(4) SD Expansion
| PIN number | Definition |
| 1 | Output 12V |
| 2 | GND |
| 3 | USB_PWREN |
| 4 | USB_DP |
| 5 | USB_DM |
| 6 | GND |
| 7 | SDIO_CARD_PWREN |
| 8 | SDIO_CDATA2 |
| 9 | SDIO_CDATA3 |
| 10 | SDIO_CDATA1 |
| 11 | SDIO_CDATA0 |
| 12 | SDIO_CCMD |
| 13 | SDIO_CCLK_OUT |
| 14 | GND |
| 15 | UART_TXD |
| 16 | UART_RXD |
Note:Logic frequency 3.3V
(5) UART
| Pin number | Definition |
| 1 | UART2_TX |
| 2 | UART2_RX |
| 3 | UART3_TX |
| 4 | UART3_RX |
| 5 | GPIO(Alarm I/O) |
| 6 | GND |
Note:
1.UART2_TX, UART2_RX, UART3_TX, UART3_RX, GPIO are the direct output of FPGA, and the level is 2.5V LVCMOS.
2.UART2 can work and is used to communicate directly with the thermal imaging core; UART3 is used to expand external devices, such as LRF, which currently has no function.
3.The signal defaults to a low level, and when the level is high, it is in an alarm state.
(6) MOTER2(Motor drive and feedback)
| Pin number | Definition |
| 1 | OUT1(Motor drive output 1) |
| 2 | OUT2(Motor drive output 2) |
| 3 | GND |
| 4 | 4.5V Output |
| 5 | FBIN(Motor feedback input) |
(7) EUHERNET(Network Interface)
| Pin number | Definition |
| 1 | ACT |
| 2 | RJ1 |
| 3 | RJ2 |
| 4 | LINK |
| 5 | RJ3 |
| 6 | RJ6 |
Note: Logic level is 3.3V
(8) MOTER1(Motor drive and feedback)
| Pin number | Definition |
| 1 | OUT1(Motor drive output 1) |
| 2 | OUT2(Motor drive output 2) |
| 3 | GND |
| 4 | 4.5V Output |
| 5 | FBIN(Motor feedback input) |
(9) Alarm I/O
| Pin number | Definition |
| 1 | Alarm Outpt(5V Logic) |
| 2 | GND |
Note:The signal defaults to a low level, it will in an alarm state when the level is high.
Part 3. Control protocol
1. The built-in web config of the movement can access the web through IP to configure the movement. Basic functions of security are provided by the machine; SD card storage is optional.
2. The menu of thermal imaging movement can be called through the web to control the unique parameters of thermal imaging.
Company Details
Business Type:
Trading Company
Year Established:
2016
Total Annual:
30 Million-50 Million
Employee Number:
110~150
Ecer Certification：
Active Member
Jiangsu was established in 2016, where in National High Tech Development Zone of Suzhou Industrial Park. have R&D center which with world-class core technology, it able to development, designing and producing of commercial infrared thermal imaging module and related products and systems. ... Jiangsu was established in 2016, where in National High Tech Development Zone of Suzhou Industrial Park. have R&D center which with world-class core technology, it able to development, designing and producing of commercial infrared thermal imaging module and related products and systems. ...
Get in touch with us
Leave a Message, we will call you back quickly!