Shenzhen FRIDA LCD Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000pcs |
| Delivery Time | 10work days |
| Packaging Details | 60pcs/box original packaging |
| Outline Dimension | 228.6(H)×149.2(V)×2.39(T)mm |
| Active area | 216.96(H)×135.60(V)mm |
| Number of pixels | 1280(H)×800(V) |
| Contrast Ratio | 600 |
| Response Time | 25ms |
| Product Name | LCD panel |
| Brand Name | BOE |
| Model Number | BP101WX1-206 |
| Certification | ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
10.1 Inch IPS Lcd Display 1280x800 Lvds Interface 40 Pins EJ101IA-01G
10.1" High Brightness TFT Display 1280x800 40 Pins LCD Lvds Interface Full
Lvds 330cd/M2 LCD Display 40 Pin 1280x800 10.1 Inch TFT Screen 330 Nits
IPS 40 Pins 10.1 Inch LCD Screen Lvds 1280x800 TFT Without Backlight Driver
Product Specification
| Payment Terms | T/T | Supply Ability | 5000pcs |
| Delivery Time | 10work days | Packaging Details | 60pcs/box original packaging |
| Outline Dimension | 228.6(H)×149.2(V)×2.39(T)mm | Active area | 216.96(H)×135.60(V)mm |
| Number of pixels | 1280(H)×800(V) | Contrast Ratio | 600 |
| Response Time | 25ms | Product Name | LCD panel |
| Brand Name | BOE | Model Number | BP101WX1-206 |
| Certification | ROHS | Place of Origin | China |
| High Light | BOE 25ms industrial lcd display ，10.1" Industrial LCD Display 25ms ，1280x800 40 pin tft display 25ms | ||
10.1 Inch 1280x800 Lcd Panel 40 Pins Lvds BP101WX1-206 330 Nits
General Description:
Bp101wx1-206 10.1-inch flat panel LCD module Structure features LCD screen size 10.1 inches point resolution 1280(RGB)×800,WXGA pixel arrangement RGB vertical strip aspect ratio 16:10(width: height)
Features:
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) × 135.60(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 169.5 | ㎛ | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16.7M(6bits + Hi-FRC) | colors | |
| Display mode | Transmission mode. Normally Black | ||
| Outline Dimension | 228.6 × 149.2 × 2.39typ. | mm | |
| Weight | 150 (max) | gram | |
| Surface Treatment | Hard Coating, 3H, Low Reflection (Front Polarizer) | ||
| Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
| Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Power Supply Voltage (LCD Module) |
VDD |
-0.3 | 4.2 | V | |
| Back-light Power Supply Voltage | HVDDOUT | -0.3 | 18 | V | |
| Back-light LED Current |
IHVDD |
- | 96 | mA | |
| Back-light LED Reverse Voltage |
VR |
- | 2 | V | |
| Operating Temperature | TOP | 0 | +50 | C |
|
| Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
|
Parameter |
Symbol |
Values |
Unit |
Notes |
||
| Min | Typ. | Max | ||||
| Power Supply Input Voltage | VDD | 3.0 | 3.3 | 3.6 | V | Note 1 |
| Power Supply Current | IDD | - | 303 | - | mA | |
| LED Driver Power Supply Voltage | HVDD | 3 |
- |
18 | V |
|
| LED Driver Power Supply Current | IHVDD |
- |
568 |
- |
mA | |
| LED Driver Efficiency | η | - | 85 | - | % | |
| Positive-going Input Threshold Voltage |
VIT+ |
- |
- |
+100 | mV |
Vcom = 1.2V typ. |
| Negative-going Input Threshold Voltage |
VIT- |
-100 |
- |
- |
mV | |
| Differential input common mode voltage |
Vcom |
- |
1.2 |
- |
V | VIH=100mV, VIL=-100mV |
|
Power Consumption |
PD |
- | 1.0 | W | ||
|
PBL |
- | 2.4 | W | Have Driver | ||
|
PTotal |
- | 3.4 | W | |||
Notes: 1.The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for 3.7V at 25C Max value at White Pattern. 2.Calculated value for reference(VLED X ILED) 3.CTF of Power Supply Current:PD/PBL.
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | Remark | |
| Viewing Angle range | Horizontal | Θ3 | CR > 10 | 70 | 80 | - | Deg. | Note 1 |
| Θ9 | 70 | 80 | - | Deg. | ||||
| Vertical | Θ12 | 70 | 80 | - | Deg. | |||
| Θ6 | 70 | 80 | - | Deg. | ||||
| Color Gamut | - | 50 | - | % | ||||
| Luminance Contrast ratio | CR | Θ = 0. | 600 | - | - | Note 2 | ||
| Luminance of White | 5 Points | Y |
Θ = 0. |
280 | 330 | - | cd/m2 | Note 3 |
|
White Luminance uniformity |
5 Points | ΔY5 | - | 80 | - | Note 4 | ||
| White Chromaticity | Wx | Θ = 0. | Typ. -0.03 | 0.313 | Typ. +0.03 | Note 5 | ||
| Wy | 0.329 | |||||||
| Reproduction of color | Red | Rx | Θ = 0. |
Typ. -0.03 |
0.600 |
Typ. +0.03 |
||
| R | 0.340 | |||||||
| Green | Gx | 0.315 | ||||||
| G | 0.565 | |||||||
| Blue | Bx | 0.150 | ||||||
| By | ||||||||
| 0.125 | ||||||||
| Response Time (Rising + Falling) | TRT |
Ta= 25.C Θ = 0. |
- | 25 | - | ms | Note 6 | |
| Cross Talk | CT | Θ = 0. | - | - | 2.0 | % | Note 7 | |
Notes :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of Θ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state . Luminance Contrast Ratio (CR) is defined mathematically.
3. Center Luminance of white is defined as luminance values of 5point average across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations for a total of the measurements per display, the LED current is set at 20mA.
4. The White luminance uniformity on LCD surface is then expressed as : ΔY = Minimum Luminance of 5 (13)points / Maximum Luminance of 5(13).
5. The color chromaticity coordinates specified in Table 5 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel.
6. The electro-optical response time measurements shall be made by switching the “data” input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td.
7. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark.
Interface Connection:
The electronics interface connector is 20455-040E-12.
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | Non Connection |
| 2 | VDDIN | Power supply VDDIN=3.3V (Typ.) |
| 3 | VDDIN | |
| 4 | VDC | Power supply VDC=3.3V (Typ.) |
| 5 | NC | Non Connection |
| 6 | CLK EDID | CLK for EDID function use |
| 7 | Data EDID | CLK for EDID function use |
| 8 | RIN0- | LVDS Negative data signal (-) |
| 9 | RIN0+ | LVDS Positive data signal (+) |
| 10 | GND | GROUND |
| 11 | RIN1- | LVDS Negative data signal (-) |
| 12 | RIN1+ | LVDS Positive data signal (+) |
| 13 | GND | GROUND |
| 14 | RIN2- | LVDS Negative data signal (-) |
| 15 | RIN2+ | LVDS Positive data signal (+) |
| 16 | GND | GROUND |
| 17 | LVDS_CLK- | LVDS Negative CLK signal (-) |
| 18 | LVDS_CLK+ | LVDS Positive CLK signal (+) |
| 19 | GND | GROUND |
| 20 | RIN3- |
LVDS Negative data signal (-) |
| 21 | RIN3+ | LVDS Positive data signal (+) |
| 22 | CE_EN | Color engine enable |
| 23 | NC | Non Connection |
| 24 | NC | Non Connection |
| 25 | GND | GROUND |
| 26 | NC | Non Connection |
| 27 | NC | Non Connection |
| 28 | GND | GROUND |
| 29 | NC | Non Connection |
| 30 | NC | Non Connection |
| 31 | LED_GND |
LED GROUND |
| 32 | LED_GND | |
| 33 | LED_GND | |
| 34 | NC | Non Connection |
| 35 | LED_PWM | LED driver PWM duty |
| 36 | LED_EN | LED driver enable |
| 37 | CABC_EN | CABC function enable |
| 38 | VLED |
Power supply VLED=3~18V (Typ.) |
| 39 | VLED | |
| 40 | VLED |
Dimensional Requirements:
| Parameter | Specification | Unit |
| Active Area | 216.96 (H) × 135.6 (V) | |
| Number of pixels | 1280(H) X800 (V) (1 pixel = R + G + B dots) | |
| Pixel pitch | 0.1695 | |
| Pixel arrangement | RGB Vertical stripe | |
| Display colors | 16.7M | |
| Display mode | Normally Black | |
| Dimensional outline | 228.6*149.26*2.39 (Typ.) | mm |
| Weight | 150 (Max) | gram |
| Back-light | LED, Horizontal-LED Array type |
Matters Needing Attention:
Cautions for the atmosphere:Dew drop atmosphere should be avoided.Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended.
Cautions for the module characteristics:Do not apply fixed pattern data signal to the LCD module at product aging.Applying fixed pattern for a long time may cause image sticking.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
30000000-35000000
Employee Number:
245~295
Ecer Certification：
Active Member
Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201... Shenzhen FRIDA LCD Co., Ltd is a high-tech enterprise specializing in LCD display and touch panel, smart cloud, software, hardware and mold development, is committed to becoming a standard and customized audio and video solution provider in AIOT field for our customers. FRIDA LCD was founded in 201...
Get in touch with us
Leave a Message, we will call you back quickly!