Guangdong ALI Testing Equipment Co,.Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 100 Set / Sets per Month |
| Delivery Time | 10-60days after confirmed payment or by contract stipulation |
| Packaging Details | Export package |
| Accuracy class | 0.5 |
| Induction method | Precision load cell (sensor) |
| Speed accuracy | Less than ±0.5% |
| Effective test force range | 0.02/100~100% |
| Operation method | computer control |
| Power | Electronic |
| Brand Name | GSKA |
| Model Number | Universal Tensile Testing Machine |
| Certification | CE SGS ROHS UL CE |
| Place of Origin | Dongguan China |
View Detail Information
Explore similar products
SGS Universal Compression Testing Machine , 0.01-500mm/Min Tensile Test
Plastic Universal Tensile Testing Machine , 500mm/min Compression Testing
OEM ODM Horizontal Tensile Universal Testing Machine 3000KN 5000KN
AC 380V Microprocessor Control Horizontal Tensile Testing Machine OEM
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 100 Set / Sets per Month |
| Delivery Time | 10-60days after confirmed payment or by contract stipulation | Packaging Details | Export package |
| Accuracy class | 0.5 | Induction method | Precision load cell (sensor) |
| Speed accuracy | Less than ±0.5% | Effective test force range | 0.02/100~100% |
| Operation method | computer control | Power | Electronic |
| Brand Name | GSKA | Model Number | Universal Tensile Testing Machine |
| Certification | CE SGS ROHS UL CE | Place of Origin | Dongguan China |
| High Light | 20inches/min Tension Testing Machine ，Hydraulic Clamp Tension Testing Machine ，Hydraulic Clamp Tensile Testing Machines | ||
Frequency Conversion System Tension Testing Machine Hydraulic Clamp
Industry and functional characteristics:
1, metal tensile testing machine: metal material tensile strength, small elongation, need to configure metal punctuation extensiometer.
2, rubber tensile testing machine: rubber or elastomer elongation is relatively large, need to be attached with a large punctuation elongation device, at the same time the fixture design to consider the characteristics of rubber, can not slip. Can be added with O - ring fixture, tire industry fixture, etc.
3, plastic tensile testing machine: plastic tensile strength is bigger than rubber, elongation is big or small, and often to test three point bending test.
4, textile tensile testing machine: textile industry needs to test fabric peeling, piercing, tearing, single yarn tensile test, fixture and software is special.
5, paper tensile testing machine: paper needs to test tensile strength, ring compressive strength, vertical pressure, flat pressure, side pressure, peel strength, etc., more fixtures.
6, leather tensile testing machine: leather needs to test tensile strength, tear strength, etc., the test item is relatively simple.
Four, according to the test materials: metal material fixture and non-metal material fixture;
Five, according to the test temperature: normal temperature fixture, high temperature fixture, low temperature fixture, high and low temperature fixture;
Six, according to use: stretching fixture, compression fixture, bending fixture, cutting fixture, stripping fixture, tearing fixture, sealing fixture, bending and bending fixture;
Seven, according to the degree of automation: manual fixture, pneumatic fixture, electric fixture, hydraulic fixture.
Control system:
1, frequency conversion system tensile testing machine: the use of frequency conversion motor control system, stretching, compression speed through the frequency conversion governor control.
2, servo system tensile testing machine: servo motor control system, stretching, compression speed and displacement control is more accurate. The servo motor system is a servo control system with intelligent feedback operation, which can be used for speed test, cycle test, programming test and so on.
3, other driving mode tensile testing machine: through the DC motor control, the driving mode of tensile testing machine due to low cost performance, has been gradually phased out.
Main Technical Parameter: Tensile Test Equipment:
| Max capacity | 5kg,10kg,25kg,50kg,100kg,250kg,500kg,1000kg,2000kg,5000kg(It is optional.) can be setting |
| Induction method : | Precision load cell (sensor) |
| Max. Load Capacity : | 5000kg |
| Force Resolution/Accuracy: | ± 0.5% |
| Accuracy class : | 0.5 |
| Resolution: | 1/1,000,000 |
| Test width: | 400mm(Standard specifications special specifications can be customized) |
| Test stroke : | Max.700 mm( included the fixture) |
| Stroke Resolution: | 0.01mm |
| Speed range: | 0.001-20inches/min |
| Reference Machine Dimension: | 800×530×1600mm (L*W*H) Support Customized |
| Power : | 1 phase 220V 50/60Hz |
| Packing | Standard Export plywood case |
| Force system | servo drives + Servo motor + precision ball screw drive |
| Control system | Mechanical transmission + TM2101 + Pulse Command and Control System control |
| Measurement and Control System | TM2101 and control system; master controller uses the most advanced 32-bit ARM processor in the 21st century, the processing speed of the Pentium-class common computer standards, compared to the traditional 8 yuan SCM control system overall performance greatly improved, faster operation, control accuracy higher |
Obtain data | The key components are used America's most stable and ultra-precision 24 yuan AD, sampling rate of up to 2000 times / sec, can capture the power of instantaneous change process, the entire file, regardless of the resolution of up to 1,000,000 indexing |
| Displacement Control: | Displacement encoder count with four frequency technology So that the displacement of four times the resolution can up to 0.0005mm |
| Safety devices: | 1. overload, emergency stop device 2. the upper and lower travel limit devices 3. the test is completed automatic shutdown device |
| | ASTM D903, ASTM E8 CNS11888, JIS K6854, PSTC7 ASTM D903,GB/T16491CNS-11888,JIS K6854, PSTC-7 ,ASTM E4,ASTM D828,ASTM D882,ASTM,D1938,ASTM D 412 ,ISO 8339ASTM D3330,ASTM F88,ASTM F904,ISO 37,JIS P8113,QB/T 2358,QB/T 1130 , ISO 527 ,ISO 178 and other standards. |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
1997
Total Annual:
20000000-30000000
Employee Number:
50~100
Ecer Certification：
Active Member
Company Profile The company had grown very fast since it was founded in 2009 which holds the operation concepts of being morality-rooted and honesty-based, FREETO® has earned great reputation globally with our excellent service and quality. Guided by the FREETO® mission, “Perfect Qu... Company Profile The company had grown very fast since it was founded in 2009 which holds the operation concepts of being morality-rooted and honesty-based, FREETO® has earned great reputation globally with our excellent service and quality. Guided by the FREETO® mission, “Perfect Qu...
Get in touch with us
Leave a Message, we will call you back quickly!