Laboratory Salt Spray Test Chamber Jd-200 NSS ACSS 47℃±1℃ Pressure Tank

Product Specification

Laboratory Volume 1200l Salt Spray Test Chamber Jd-200 Salt Spray Test Machine

JD-200 salt spray test machine technical parameters

Scope of application:

The salt spray test machine is used for the surface treatment of various materials, including coatings, electroplating, organic and inorganic coatings, anodizing, anti-rust oil and other anti-corrosion treatments to test its corrosion resistance, thus establishing the quality of the product.

Model and name:

JD-200 salt spray test machine

First, salt spray test box JD-200 specifications

Internal dimensions 2000×1000×600 (L×W×H)mm

External dimensions 2800*1250*1350 (L×W×H)mm

Laboratory temperature NSS ACSS 35°C±1°C/ CASS 50°C±1°C

Pressure tank temperature NSS ACSS 47°C±1°C/ CASS 63°C±1°C

Laboratory volume 1200L

Salt water tank volume 50L

Compressed air pressure 1.00 ± 0.01kgf / cm2

Spray volume 1.0-2.0ml/80cm2.h

Laboratory relative humidity above 85%

Second, the salt spray test box JD-200 features:

1. The inner and outer frames are made of imported gray 8mmP.V.C plate, the bottom plate is made of 8mm plate, special treatment of corrosion-resistant plastic steel V-shaped frame and stainless steel pipe angle storage, to ensure that the sample is 30 degree oblique angle, six-wheel sliding, can be pushed away.

2. Fine workmanship, beautiful appearance, high transparency, pneumatic opening.

3. Automatic/manual watering system with automatic/manual water replenishment when the water level is insufficient. The experiment is not interrupted to meet the diverse environmental requirements of the guests. (Automatic hydration only needs to access the water pipe)

4. Nozzle: The spray tower is equipped with a cone disperser, which has the functions of guiding the mist, adjusting the amount of fog, and evenly fogging.

5. Adopt high-precision multi-function timer, test time can be set to multi-function. With power-off memory function, incoming call

Continue to work before the power failure, until the product is completed, and avoid the experiment after the power failure.

6. In the salt spray experiment, the steam is directly heated, the heating rate is fast, the temperature distribution is uniform, and the standby time is shortened.

7. Two-button automatic operation. With a full detection failure warning system. When the fault occurs, it can be illuminated and beep.

8. Two built-in mist collection cylinders are used. It is less susceptible to damage than traditional external models.

9. With overload protection. Prevent damage to the instrument and the internal electronic control accessories of the instrument when an abnormality occurs.

10. The inner and outer cabinets are connected to the sealing groove and sealed with water to prevent salt spray from leaking out.

11. The imported temperature controller uses digital display, PID control, error ± 0.1 °C.

12. Temperature range:

(1) Laboratory temperature: 35 ° C - Pressure tank temperature: 50 ° C (can be set arbitrarily)

(2) Laboratory temperature: 47 ° C - pressure barrel temperature: 63 ° C (can be set arbitrarily)

13. The reagent refilling bottle adopts a hidden water-filled perspective window, which is easy to clean and is not easy to be broken.

14. Heating rate:

(1)laboratory, room temperature --- → 35 ° C for about 35 minutes

(2) Pressure tank, normal temperature---→47°C, about 15 minutes

15. Temperature accuracy: ±1 °C

Applicable international standards: RELATEU STANDARDS CNS 3627, 3885, 4159, 7669, 8866; JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO3768, 3769, 3770; ASTM B-117, ASTM B-268 GB-T2423, GJB200.

Third, salt spray test box JD-200 control panel and electrical accessories:

Fourth, the internal device:

Five, random attachments:

Sixth, service commitment

The whole machine provides 12 months free warranty, lifetime maintenance (except for human reasons and force majeure factors)

(Product Image)