IPX6 Tightness Dust Control Equipment / Ip Testing Equipment 800L 1000L 1500L

Product Specification

OEM IPX6 Tightness Dust Controlled Equipment 800L 1000L 1500L

OEM IPX6 Tightness Dust Controlled Equipment 800L 1000L 1500L is designed and manufactured according to IEC60529, "Shell Protection Grade (IP Code)", which is suitable for sand and dust test of electrical products with the first characteristic digits of 5 and 6 (IPX5 and IPX6).

The test box can provide non-laminar vertical circulating airflow of dust, which can be controlled regularly. At the same time, it is equipped with a vacuum pump for pumping in the shell of the tested product, and can adjust the pumping volume and pressure difference. In addition, it is equipped with an air temperature control device to ensure that the test is carried out under the standard environmental conditions.

Structure and Material

Material:Interior material SUS304 stainless steel,Exterior material Steel Plate with protective coating

Sample outlet: dust-proof socket

Controller: programmable controller (the controller has the following arbitrary setting control functions).

A. Dust blowing time (stop and blow) h/m/s adjustable

B. Cycle: arbitrary adjustable

C. Preset test time: 0s to 999h99m99s arbitrary adjustable

D. Power on: break through break

Metal screen size: nominal diameter 50 um, nominal distance between lines 75 um

Blower: Enclosed alloy low-noise motor, multi-vane centrifugal fan

Vacuum system: equipped with pressure gauge, air filter,

Automotive And Electronic Laboratory And Scientific Equipment Sand Dust Proof Temperature Humidity Testing Chamber

IEC 60529

ISO 20653

MIL-STD-810F-510

MIL-STD-810G

Larger capacity of 1500 liters and 2000 liters.

Standard and custom.

Suitable for large and more quantity products

Dust blowing through special wind tunnel and air outlet

Constant dust concentration

2 viewing windows with wipers

2 doors with tight seal

Programmable color LCD touch screen controller

USB and Ethernet

Strong stainless steel specimen shelves

Build -in power interface and vacuum system for specimens

Internal illumination in test room

Reliable performance

Safety protection system

CE mark, ISO17025 calibration

Easy to operate

Dust collection section is located on bottom of test chamber.

A heater fixed into test chamber to keep dust dry.A viewing window with a manually controlled wiper.

The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination

• Equipment structure takes up stainless steel plate plus (41090) power for hull painting. It not only has good profile, but also has fine corrosion resistance.
• It has advanced and innovative control theory, it integrates three control systems of PLC, HMI and SOC in fine way. Control is correct by 100%, and you can experience the novel control feeling;
• It utilizes most powerful and reliable PLC and special modules in the industry circle. 50 programs and 2500 steps are provided for user to make setting/storage and running;
• It utilizes protection module for safe voltage, the withstand voltage can reach 500V. After energizing the equipment, the equipment will not be burned and it can protect the equipment by 100%.
• It has automatic safety protection switch, which has high sensitivity, can detect any state, cut off protection and give alarm in shortest time and assure safety of the personnel and equipment;
• It has air supply and circulating system, which can avoid dead angle of air flow in the chamber and improve the uniformity degree of product temperature and humidity.

Contact us now,Attach 2 kg of talcum powder!