Qingdao Exceed Fine Chemicals Co.,Ltd
| Payment Terms | L/C,T/T |
| Supply Ability | 1000mt/month |
| Delivery Time | two weeks |
| Packaging Details | 3.5kg/drum; 18kg/drum |
| Product name | Rubber to Metal Adhesive 827 |
| Appearance | Black Liquid |
| Solid content by weight | 22~26% |
| Flash Point(seta) | 25-28℃ |
| Shelf life | 12 months at 23℃ for unopened containers |
| Diluent | Xylene |
| Brand Name | EXCEEDCHEM |
| Model Number | 827 |
| Certification | ISO9001:2008 |
| Place of Origin | China |
View Detail Information
Explore similar products
High Performance Rubber To Metal Bonding Agent 821 Cover Coat Adhesive
Heat Vulcanization Adhesive 823 Equivalent to Chemlok 220/6125
Rubber To Metal Bonding Adhesive 827 Black liquid
Rubber to Metal Bonding Agent 828 Excellent Bonding Properties Equivalent to
Product Specification
| Payment Terms | L/C,T/T | Supply Ability | 1000mt/month |
| Delivery Time | two weeks | Packaging Details | 3.5kg/drum; 18kg/drum |
| Product name | Rubber to Metal Adhesive 827 | Appearance | Black Liquid |
| Solid content by weight | 22~26% | Flash Point(seta) | 25-28℃ |
| Shelf life | 12 months at 23℃ for unopened containers | Diluent | Xylene |
| Brand Name | EXCEEDCHEM | Model Number | 827 |
| Certification | ISO9001:2008 | Place of Origin | China |
Rubber to Metal Adhesive 827 for surface treatment and one-coat, suitable for various rubbers
Introduction
Rubber to Metal Adhesive 827 is an adhesive used as cover-coat with substrates surface treatment adhesive, or can be used as one-coat in some occasions. It is suitable for the rubber as below:
Natural rubber (NR), polyisoprene (IR), polybutadiene (BR), polychloroprene (CR), styrene-butadiene (SBR), nitrile (NBR), butyl (IIR), Ethylene-Propylene-Diene Monomer (EPDM), etc.
Features
Free of chlorinated solvent;
Free of heavy metal element;
Good bonding performance at low temperature;
Good prebrake resistance;
Good weather resistance, heat resistance, water resistance, solvent resistance, oil resistance, salt resistance, corrosion resistance;
Typical Properties
| Components | Polymers, organic compounds, inorganic fillers and organic solvents |
| Color | Black |
| Solids Content | 22~26% |
| Viscosity | (23℃, Brookfield LV2 30rpm) 300～700cps |
| Flash Point | 25~28℃ |
| Diluent | Xylene |
| Solvent | Xylene |
| Shelf life | 12 months at 23℃ for unopened containers |
Applying 827
Fully stirring: During the storage of Rubber to Metal Adhesive 827, part of it will deposit at the bottom of the container. It must be fully stirred before applying, and it can be used only after it is evenly mixed; if the applying process take long time, it should be stirred at high speed for 3-5 minutes at intervals of 2 hours.
Dilution: This product can also be appropriately diluted by adding diluent according to the actual operation needs. It is recommended to dilute according to the amount used, and the diluted product cannot be stored for a long
time.
Brushing method: No need to dilute;
Roller painting method: No need to dilute;
Dip painting method: 100 parts Rubber to Metal Adhesive 827 plus about 0-50 parts diluent;
Spraying method: 100 parts Rubber to Metal Adhesive 827 plus about 30-80 parts diluent.
Applying: This product can be applied by brush painting, dip painting, roller painting, spraying and other methods. The coating should be even, avoid excessive overflow.
Cover-coat use: dry film thickness 10-20μm, caustic environment resistance 20-25μm;
One-coat use: dry film thickness 15-25μm, caustic environment resistance 25-35μm;
Drying: It takes about 40-60 minutes to dry at room temperature, and forced drying can shorten the drying time.
Storing: This product should be stored in a dry and room temperature environment, avoid exposure to high humidity and high temperature environment for a long time.
Adhesive removal: Use a rag to dip in xylene solvent to remove excess adhesive overflowing around before heating and curing. Once cured, it cannot be removed by solvent.
Curing: The best bonding performance can be obtained by curing rubber and the adhesive at the same time. When the painted part is placed in the molding die, it should be quickly filled with rubber and clamped to cure. Actual cure conditions depend on compound cure conditions.
Note
The solvent is volatile, please cover the container tightly after use.
The solvent vapor is harmful; the workplace should be fireproof and ventilated to prevent long-term inhalation or long-term skin contact.
For more safety information, please refer to MSDS.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2013
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Qingdao Exceed Fine Chemicals Co., Ltd is a high-tech enterprise that integrates manufacturing and trading. We specialize in the production of polyurethane-based products.Our company is dedicated to investing in research and development of cutting-edge products, collaborating with leadin... Qingdao Exceed Fine Chemicals Co., Ltd is a high-tech enterprise that integrates manufacturing and trading. We specialize in the production of polyurethane-based products.Our company is dedicated to investing in research and development of cutting-edge products, collaborating with leadin...
Get in touch with us
Leave a Message, we will call you back quickly!