Automatic SMT Pick And Place Machine With 4 Types Of High-Precision Nozzles

Product Specification

Automatic Desktop Pick and Place Machine TM240A

We are the developer and real manufacturer of TM220A&TM240A,what you will enjoy if buy from us:

1.More competitive price

2.More efficient delivery time

3.Fast and professional after-sale service for long life

Features

1. Small and light weight body, desktop

2.High mounting capability, up to 7000 pcs/h

3.Dual pick and place heads, 360-degree orientation 

4.Vacuum detection, automatically dispose and make up if picking fail or pick misaligned

5.4 types of high-precision nozzles 

6. Noise reduction, 3 built-in mute type pumps (cost and room saving, no need to prepare additional pump)

7.Touchable LCD screen, friendly operation interface

8.Integrated Automatic Feeders (cost saving, no need to buy extra mobile feeders) and Automatic Nylon Spool Wheel (very convenient, tape 

Nylon film automatically peeled away)

9.Standard 8G SD card, mass storage of CSV working file.

10.Humanization design, customized feeders.

11.No vision system, the self-developed Laser positioning principle is quite effective for this type of machine.

12.Build-in software operating systems, converting the operating program directly  from the PCB Circuit Diagram.

13.Small and lightweight: simple installation, convenient transportation.

14.Average power 100W: Environmental protection and energy saving.

Why choose our machine:

1) The customer who operates on a  small-to-medium 

scale will tend to opt for such a small desktop automatic pick and place system which is very convenient and easy use even without a 

technical assistance.

2) If the number of boards does not exceed a few hundred per working day, such a small desktop placement may well be the best choice.

3) Consider about the cost efficiency, the small desktop placement reaches its maximum cost efficiency in the middle range of production 

volume, particularly where full-time working is not always guaranteed.

4) A further factor which affects the choice of system is the product mix: if the boards are all customer-specific boards, each with a short or unpredictable length of run, and if production must be flexible and capable of coping with frequent changes, such small desktop placement may be best.

5)Avoid human error, more accurate and faster.

Applicable PCB boards & Components

PCB Boards size:  20*20~400*360mm

Components Range

0402, 0603, 0805, 1206, 1812, 2010, 2512, SOT-23, LED (3528, 5050, etc

SOT89, SOP-8, SOP-14, SOP-16, SOT-223, SOT-252

IC components (IC size under 16*16mm, PIN foot less than 100, fine-pitch above 0.5mm, the height                                 of component less than 3mm

Programming(Converting & Online Programming)

Converting from PCB Circuit Diagram or Normal file of Circuit Diagram

       1. Generate coordinate CSV file form. Take software Protel Designer 6 we provide, from which we can generate Protel csv. file.

                If you have Normal file, this step is not necessary. 

        2. Stack Management and generate PnP file

                With special software Stack Management System we provide, you can open Protelor Normal file, manage stacks and their relative components, and then convert the operating program (PnP file).

         This whole process only takes 5 minutes.

 Online programming

If you don't have PCB Circuit diagram or its Normal file, with the assistance of laser positioner, you can easily program for mounting components on Machine TM240A, no need any computer or other devices.

Package: Stardard export package

Packing size: L112cm*W81cm*H47cm
Weight: N.W., 35KG/G.W.,65KG

 Standard Accessories

1) Pick and Place Machine TM240A: 1

2)4 types of nozzle: Totally 6 (XS-2, S-2, M-1, L-1).

3)8G SD Card: 1

4) Card reader: 1

5) Nozzle disassembly tool: 1set

6) Adjustment tool for Nylon Spool Wheel: 1

7) Nozzle cleaning tool: 1 set

8) User manual: 1

9) Video training course: 1 set

10) PCB Coordinate file transformation tool: 1