BEIJING KOREA TECHNOLOGY CASTER CO.,LTD
| Payment Terms | T/T |
| Delivery Time | 7 days |
| Packaging Details | Carton |
| Applicable Industries: | Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Construction works |
| Warranty: | 1 Year |
| Body material: | Steel 45 |
| Wheel material: | Nylon6 |
| Type: | Heavy Duty caster |
| Load Capacity: | 540kg(EA) |
| Brand Name | KTCaster |
| Model Number | KT-LGD-60SB |
| Place of Origin | China |
View Detail Information
Explore similar products
Rigid Flange Plate 2 Ton Caster Wheels 4000kg 12 Inch Swivel Caster Wheels
Industrial Nylon6 4EA 670kg 3 Inch Swivel Casters With Brake Steel 45 body
Low Profile Industrial 60mm Outdoor Caster Wheels With Brake 540kg
92MM leveling plate casters 1000kg for Display Manufacturing Equipment
Product Specification
| Payment Terms | T/T | Delivery Time | 7 days |
| Packaging Details | Carton | Applicable Industries: | Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Construction works |
| Warranty: | 1 Year | Body material: | Steel 45 |
| Wheel material: | Nylon6 | Type: | Heavy Duty caster |
| Load Capacity: | 540kg(EA) | Brand Name | KTCaster |
| Model Number | KT-LGD-60SB | Place of Origin | China |
| High Light | Nylon6 Heavy Duty Outdoor Casters ，Heavy Duty Outdoor Casters 60mm ，Nylon6 60mm Castor Wheels | ||
Operating procedures and maintenance of caster press
1, Operating procedures
1. Operators can only operate after passing the examination and obtaining the operation certificate.
They should be familiar with the performance and structure of the machine, and abide by the safety
and shift handover system.
2. Fill oil (grease) in strict accordance with the lubrication diagram, and keep the oil quantity
appropriate and the oil circuit unblocked.
3. Check whether the equipment fasteners, especially the pin fixing parts of the tilting bed, are loose,
whether the safety protection device is good, whether the mold is cracked and whether it is firmly fixed.
4. Turn the flywheel by hand or move the crankshaft with a lever to check the stroke of the punch and
the gap between the die to prevent "gnawing the die" or jacking the equipment during driving.
5. Check whether the starting mechanism and brake are sensitive and whether the slider can be
stopped immediately.
6. Before starting the motor of the flying caster press, the clutch must be disengaged. Start the motor
and operate the slider after the flywheel speed is normal.
7. When installing the die, the slider must be placed at the lower dead center to make the closing
height of the die less than the minimum closing height of the flying caster press.
8. The processing shall be carried out in strict accordance with the pressure determined by the
allowable pressure curve of the slider, and overload operation is not allowed.
9. When working, always pay attention to whether the clutch and brake mechanism are normal;
Whether all fasteners, especially connecting rod nuts and pin nuts of tilting bed, are loose; Whether
the chess playing position changes. Stop the machine immediately if problems are found.
10. It is forbidden to punch more than two sheets at the same time.
11. After punching once, hands or feet must leave the button or pedal. When more than two people
operate, pay attention to coordination and cooperation, and use double action switch if necessary
12. When using self checking infrared photoelectric controller safety protection device, its reliability
shall be checked frequently.
13. In case of abnormal noise, continuous strike of sliding block and bite of stamping parts on the die,
stop the machine immediately for inspection.
14. Workpieces, tools and sundries shall not be placed on the workbench.
15. When adjusting the inclination angle of the flying caster press, use the lifting machinery to ensure
safety, and fix the bed pin after adjustment.
16. After work, the equipment must be checked and cleaned, daily maintenance work shall be done,
each joystick (switch) shall be placed in neutral (zero position), and the power switch shall be
disconnected to achieve tidiness, cleanness, lubrication and safety.
Outdoor Caster Wheels Parameter
| model | KT-LGD-60SB |
| Wheel material | Nylon6 |
| Load Capacity | 5400KG |
| Wheel Diameter | 60mm |
| Tread Width | 55mm |
| Load Height | 90MM |
Outdoor Caster Wheels Describe
Outdoor Caster Wheels Size
Outdoor Caster Wheels Material
| Name | Material | Treatment | |
| 1 | Caster Seat | Cold-rolled carbon steel | Black Coated/Zn Galvanized |
| 2 | Body | Aluminum alloy | Ivory/Powder Coated |
| 3 | Ball | Bearing Steel | Ni-Cr |
| 4 | Brake | Steel 45 | Zn Galvanized |
| 5 | Pin | Steel 10 | Zn Galvanized |
| 6 | Wheel | PA6 | Black |
Outdoor Caster Wheels Scope of application
KTC (Bejing Korea Technology Caster Co., Ltd.) was founded in 2007. KTC is a modern
company specialzingin the production of multi function &high quality CASTER and
KT FOOT based on best design and design technology.
The company is headquartered in Niulanshan Industrial Zone,Shunyi District, Beijing. KTC
adopts international advanced production testing equipments, professional intelligent
production management system and professional design flow. Now the company produces
multi function & high quality production, such as KT CASTER and KT FOOT, among which
high quality of height adjusting CASTER,shockproof type CASTER, high quality of height
adjusting CASTER, shockproof type CASTER,high load CASTER and level adjusting FOOT
are widely used in the world's advanced automation equipment and semiconductor e
quipment industry.
In order to manufacture the world's highest level of products,KTC use the best processing
technology and equipment. And KTC continuously launches world top level of new products.
KTC's s also has set up a branch in Korea, so it is favored by theusers of various fields around
the world.
| |
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
2800000-3300000
Employee Number:
20~50
Ecer Certification：
Active Member
The company is headquartered in the Shunyi District Niushan Industrial Zone, Beijing ,The company adopts advanced international production testing equipment and professional intelligent production management system and professional process flow,Current production KT Casters（KT CASTER）,KT Adjusti... The company is headquartered in the Shunyi District Niushan Industrial Zone, Beijing ,The company adopts advanced international production testing equipment and professional intelligent production management system and professional process flow,Current production KT Casters（KT CASTER）,KT Adjusti...
Get in touch with us
Leave a Message, we will call you back quickly!