On Slipping M6 S10C Stainless Steel Adjustable Feet For Furniture

Product Specification

                on-slipping adjustable leveling feet m6 Threaded Glide Supporting foot Furniture Leg, Light Duty KTF-VU-12

Application method of thread ring gauge
Usage of thread ring gauge: screw two ring gauges onto the external thread to be tested in random

order

1. The general gauge can not be screwed. The pitch diameter of the thread is large, and the

product is unqualified.

2. The non-stop gauge passes through the small pitch diameter, and the product is unqualified.

3 the go gauge can rotate freely at any position of the thread. The non-stop gauge can be screwed

for one to two or three turns. Sometimes it can be screwed for one or two more turns, but the end

face of the gauge cannot be screwed until the thread head is out of the ring
At this time, it means that the pitch diameter of the external thread you tested is just within the

"tolerance zone", which is a qualified product.

Thread ring gauge is used to measure the correctness of external thread size. The through end is

one piece and the dead end is one piece.

The stop ring gauge has a groove on the cylindrical surface. Threaded ring when size is above

100mm
The gauge is of double shank thread ring gauge type. Specifications are divided into coarse teeth,

fine teeth and pipe threads. pitch
The thread ring gauge and pitch of grade 2 accuracy of 0.35mm or less and higher than grade 2

accuracy are
Taper ring gauges of grade 3 accuracy of 0.8mm or less have no end stops
"Thread ring gauge" is a kind of "measuring tool", which is used to detect the pitch diameter of

standard external thread
Set a go gauge and a no go gauge. The pitch diameter of the internal thread of the two smooth

ring gauges shall be in accordance with the standard
The manufacturing accuracy of the maximum and minimum limit dimensions of thread pitch diameter

is very high. Specifications
There are as many varieties as common external thread screws.

Thread ring gauge thread gauge pass size the maximum solid profile of the thread to be measured,

and inspect the thread to be measured
Whether the effective pitch diameter exceeds the pitch diameter of the maximum solid tooth profile,

and check the actual ruler of the bottom diameter at the same time
Whether the inch exceeds its maximum physical size.

Inspection method of thread plug gauge
If the measured thread can be screwed through the thread through gauge and not completely

screwed through the thread stop gauge
The over thread non-return gauge is only allowed to screw in two sections with the measured thread,

and the screw in amount shall not exceed two threads
The pitch indicates that the pitch diameter of the measured thread does not exceed the pitch

diameter of its maximum solid profile
If the single pitch diameter does not exceed the pitch diameter of the minimum solid tooth form, the

screwing can be guaranteed
And connection strength, the pitch diameter of the measured thread is qualified, otherwise it is

unqualified.

The pitch diameter of the thread is simply the nominal diameter of the thread, which is generally

called "m " thread
The * in represents the value, which is an internal thread with a diameter between the large diameter

external thread and the crown
Striation is a diameter between the diameter and small diameter of the tooth bottom and the opposite

meaning of the large diameter.

Stainless Steel Adjustable Feet Parameter

Stainless Steel Adjustable Feet Size

Stainless Steel Adjustable Feet Material

Stainless Steel Adjustable Feet Describe

Application.

Stainless Steel Adjustable Feet Scope of application

About us.

KTC.