Air Jack 2000KG G1813 Suspension Air Spring For High Chassis And Heavy Body Car

Product Specification

Air Jack 2000KG G1813 Suitable For High Chassis And Heavy Body Car

G1813 Technical parameters

Suitable for high chassis and heavy body car, with wheels and rod, suitable for use on the ground

Suitable for high chassis and heavy body car, with wheels and rod, suitable for use on the ground

Technical Parameters

Lifting weight :2000kg,

Supply pressure :145P si / 10Bar / 10Mpa,

Lowest height: 125mm / 5.71 "(+ 50mm / 1.97" -195mm / 7.68 “),

Heighest height: 400mm / 15.75 "(+ 50mm / 1.97" -450mm / 17.72 "),

Air inlet: G1 / 4,

Lifting time: 4 sec,

Operating temperature: -60℃- +50℃,

Air spring production process:

1. Rubber mixing: exercise and rubber processing
2. The production of rubber bellows: bellows is made of inner is a layer of rubber, the middle is two layers of cord fabric and the outside is a layer of rubber. Through the fixed mold them together.
3. Other forming accessories: plastic parts, iron base, aluminum base, iron plate, and other hardware accessories, these parts have been made in different moulds.
4. The bellows and other accessories are gotten together by machine and make out air spring.
5. Air tightness detection: each production of good air spring fills the air, and then put into the water to test whether the bubbling gas leakage.
6. Quality: blasting test, fatigue test, the air spring blasting pressure GUOMAT factory is up to 30 atmospheric pressure, fatigue to reach 3 million times, meet the international standards.
7. Packing: the qualified products for packaging, are usually carton packaging, need some special strong wooden case packing, others are labeling packaging according to customer's requirements.

Compared to the horizontal jack, the Quick Easy TopTM is highly mobile and compact. The wide flat bottom surface can effectively prevent sagging on soft roads, whether you are on the ground, sheet metal rack, or It is the use of the quick and easy top on the beam calibration instrument, you can expect many years of trouble-free use, in order to achieve this we infused all the energy to ensure that each fast top maintains the highest quality.

• Easy and effortless:

Ingeniously adopting the rubber airbag through the pneumatic automatic lifting principle, you only need to press the up and down buttons, no need for manpower, easy and free.

• High mobility:

Compared with ordinary lifting devices, the utility model has the advantages of compact shape, simple structure principle, light weight, convenient convenience and high mobility.

• Efficient and efficient:

With a fast lifting and lowering speed, it is easy to lift the vehicle to the working position within 3 seconds, and then bid farewell to the age of trouble.

• Long service life:

Since there is no sliding seal and hydraulic device, it is not easy to be damaged by friction. Rubber bladders are extremely resistant to flexing and aging. Even in harsh environments, it can be used for years without problems.

• Excellent cost of benefit:

Effectively reduce the labor intensity of users, shorten working hours, increase workload and frequency of work, and obtain more economic benefits.

• safe and stable:

It requires almost no maintenance and is reliable and safe. Equipped with a safety valve to effectively prevent the danger caused by over-pressure, and eliminate potential safety hazards.

• Compact original height:

Compared with the ordinary jack, its compact shape can be compressed to a height of 130mm, while the three-curve quick-opening can be extended to 450mm without installing the raised top block. Can meet the lift of most vehicles.

• Maintenance and lubrication at low temperatures:

The high-performance imported rubber airbag is used as the lifting power, and the performance is excellent under the harsh ambient temperature. There is no problem that the hydraulic oil in the low temperature environment is difficult to lift and deteriorate.

• Oil spills are not in trouble:

Quick and easy top does not require hydraulic oil drive or sliding seals, so there is no problem that the seals are easily damaged by dust, and completely leak the oil.

• Wide range of uses:

Quick and easy top can be easily placed in a small space, saving preparation time and cost. The wide and flat bottom surface can effectively prevent the phenomenon of being unable to support due to sagging on the soft road surface.

• Good horizontal stability:

Built-in stable guiding piston enhances horizontal stability and minimizes horizontal displacement, making the lifting process smoother and safer.

• Allow working pressures up to 0.8 Mpa:

The quick and easy top is made of high-performance and high-quality airbags. It has two or four layers of skeleton inside, so that it can withstand an internal pressure of 8 bar, so the carrying capacity is greatly enhanced.

• Low cost:

The service life of ordinary hydraulic jacks is about half a year, and the quick top has a life of 5 years or even longer in the case of proper use. Has an absolute cost advantage.

• Variable angle lever:

The 90-degree free angle of the user-friendly design of the drawbar greatly facilitates the convenient use of operators in different occasions, postures and heights.

• Improve store image:

Sophisticated hardware facilities can attract customers, enhance customer confidence, improve employee morale and improve store image. Customer satisfaction will also increase as they are guaranteed to be able to do their jobs as planned.