Warehouse Push Back Racks , Pallet Flow Racking System With RAL Color

Product Specification

Warehouse Push Back Racks , Pallet Flow Racking System With RAL Color

Push Back Racks Features:

1) Compared with drive in rack, it's high safety for forklift no need to enter the racking, which reduce shelf collision risk;

2) greatly improvedwarehouse cargo access efficiency ;

3) High warehouse utilization rate & work efficiency, greatly reduce job waiting time;

4) Different types of products can be levered flexible access;

5) More stable and safety on structure compared with drive in or drive through rack;

6) First in first out or first in last out can be realized;

7) can be automatically sorted and inventory

8) Radio shuttle works at same time with forklift,which greatly improve shelf access efficiency

How to Use Push Back Racks

1. Put the goods on cart from the front and push in.
2. Goods stored later will put the former goods forward, carts connected together.
3. When the front goods are taken away, inside cart will slide down automatically.

Dehumidifier Features

• First-in-last-out mode

• Large storage capacity and extremely high space utilization

• Suitable for multiple varieties and large quantities of goods

• Suitable for situations such as freezer that need to greatly improve space utilization

1. When the number of pallets of a certain product is large and “first in, first out” is not required, the working procedure can be simplified and the benefits are extremely significant;
2. It can shorten the picking time, no special handling equipment required;
3. Due to the large storage area and fewer channels, space utilization and productivity are high;
4. It can avoid high-density storage shelves often caused by cargo damage during loading and unloading operations.

Push Back Racks function

Push-back rack, also known as push-in rack, are connected by multi-layer carts between the front and rear beams. Stacked goods are pushed into the carts from the outside, and the stored goods will push the original goods into it. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or the time required for the goods must be increased.

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.

The press-in racking system has higher requirements for the manufacturing accuracy of the rack. Because the cooperation between the pallet cart and the guide rail is high, the manufacturing and installation accuracy is strict. Failure to do so will cause the racking system to run poorly and affect work effectiveness.

Push Back Racks application

1. Push-back rack are composed of typical structural parts such as pallet carts. Pallet carts have flow characteristics. Goods are specified to enter and exit at one end of the rack, and follow the order of advanced back-out;
2. When storing and transporting goods, the forklift works only at the lower end of the rack aisle, and does not need to enter the rack goods storage aisle. Such shelves have the typical characteristics of high storage density and fast storage and transportation speed;
3. It is usually used for storage places that are extremely limited, but it must be used in places where the storage requirements are not high, such as increasing storage capacity or requiring time for the goods.

Design Features

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.