Adjustable Pushback Racking System , Steel Heavy Duty Pallet Racking

Product Specification

Adjustable Pushback Racking System , Steel Heavy Duty Pallet Racking

Pushback Racking System Introduction

1. Hot sell steel rack
2. There are a wide range of options and components to accommodate your special needs.
3. The warehouse rack/ palleting rack /pallet rack is widely used in warehouse for storage and stocking.
4. All sizes and colors are available.
5. Different material thickness can make. The regular thickness of the beams and uprights are 1.82mm and 2.0mm.
6. The mezzanine rack using the pole of shelf as the supporting of the floor, the floor may be two or three.

How to Use Pushback Racking System

1. Put the goods on cart from the front and push in.
2. Goods stored later will put the former goods forward, carts connected together.
3. When the front goods are taken away, inside cart will slide down automatically.

Pushback Racking System Features

• First-in-last-out mode

• Large storage capacity and extremely high space utilization

• Suitable for situations such as freezer that need to greatly improve space utilization

1. When the number of pallets of a certain product is large and “first in, first out” is not required, the working procedure can be simplified and the benefits are extremely significant;
2. It can shorten the picking time, no special handling equipment required;
3. Due to the large storage area and fewer channels, space utilization and productivity are high;
4. It can avoid high-density storage shelves often caused by cargo damage during loading and unloading operations.

Product detail

Cart - Bearings – Rails – Anti-Slip Steel – Rail Bracket – Front Stopper

function

Push-back rack, also known as push-in rack, are connected by multi-layer carts between the front and rear beams. Stacked goods are pushed into the carts from the outside, and the stored goods will push the original goods into it. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or the time required for the goods must be increased.

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.

The press-in racking system has higher requirements for the manufacturing accuracy of the rack. Because the cooperation between the pallet cart and the guide rail is high, the manufacturing and installation accuracy is strict. Failure to do so will cause the racking system to run poorly and affect work effectiveness.

The cost of press-in rack is higher, which is directly proportional to its value. Its warehouse utilization rate reaches about 80%, and the space utilization rate of the warehouse can be improved.

It is more than 30% high, easy to access and flexible, and is the rack with the highest storage efficiency.

application

1. Push-back rack are composed of typical structural parts such as pallet carts. Pallet carts have flow characteristics. Goods are specified to enter and exit at one end of the rack, and follow the order of advanced back-out;
2. When storing and transporting goods, the forklift works only at the lower end of the rack aisle, and does not need to enter the rack goods storage aisle. Such shelves have the typical characteristics of high storage density and fast storage and transportation speed;
3. It is usually used for storage places that are extremely limited, but it must be used in places where the storage requirements are not high, such as increasing storage capacity or requiring time for the goods.

Our Services

1. storage rack sample is available: If you need a sample, please tell us your receiving account number, we will arrange samples for you.

2. Apart from our standard design, we are also able to supply customized products.

3. All our products share one year quality warranty. Within quality warranty period, we will be responsible for repairing any damage as long as it is not made manually or by natural calamities. Beyond quality warranty time, we will also do our best to coordinate customer to repair any damage on our cost price.