Shanghai Aboom Metal prodcut co.,ltd
| Payment Terms | T/T |
| Supply Ability | 200 TONS PER MONTH |
| Delivery Time | 7-15dyas |
| Packaging Details | Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested. |
| TYPE OF MATERIAL | Precipitation, hardening, martensitic stainless steel |
| PRODUCT | NAS630 S17400 17-4PH precipitation hardened stainless steel Shaft |
| STANDARD | ASTM A564 |
| GRADE | UNS630 17-4PH S17400 SUS630 |
| Manufacturing process | The steel melt shall be refined with AOD or equivalent. |
| application | Bearings, steam turbine parts |
| Microstructure | Precipitation hardening |
| Testing facility | Accept other third-party testing agencies such as SGS |
| Brand Name | ABOOM |
| Model Number | NAS630 |
| Certification | EN 10204 Type 3.1 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
NAS631 S17700 Precipitation Hardened Stainless Steel Shaft 1.4568 SUS631
17-4PH Precipitation Hardening Stainless Steel Round Bar Stock UNS630 S17400
17-7PH Precipitation Hardened Stainless Steel Round Bar Stock NAS631 S17700
1.4568 S17700 Precipitation Hardening Stainless Steel Round Bar Stock 17-7PH
Product Specification
| Payment Terms | T/T | Supply Ability | 200 TONS PER MONTH |
| Delivery Time | 7-15dyas | Packaging Details | Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested. |
| TYPE OF MATERIAL | Precipitation, hardening, martensitic stainless steel | PRODUCT | NAS630 S17400 17-4PH precipitation hardened stainless steel Shaft |
| STANDARD | ASTM A564 | GRADE | UNS630 17-4PH S17400 SUS630 |
| Manufacturing process | The steel melt shall be refined with AOD or equivalent. | application | Bearings, steam turbine parts |
| Microstructure | Precipitation hardening | Testing facility | Accept other third-party testing agencies such as SGS |
| Brand Name | ABOOM | Model Number | NAS630 |
| Certification | EN 10204 Type 3.1 | Place of Origin | CHINA |
| High Light | precipitation hardened stainless steel ，stainless steel round bar stock | ||
NAS630 S17400 Stainless Steel Shaft Stock Precipitation Hardened Microstructure
NAS630 S17400 17-4PH precipitation hardened stainless steel Shaft stock
The NAS630 S17400 17-4PH alloy is a precipitation, quenched, martensitic stainless steel, and this grade has high strength, hardness (up to 300 0 C / 5000 C) and corrosion resistance. After heat treatment, the mechanical properties of the product are more complete, and it can reach compressive strength of up to 1100-1300 mpa (160-190 ksi). This grade cannot be used above 300 0C (572 0F) or very low temperature. It has good corrosion resistance to the atmosphere and diluted acids or salts. It has the same corrosion resistance as 304 and 430.
| 3/16" | 1/4" | 5/16" | 3/8" | 7/16" | 1/2" | 9/16" | 5/8" | 3/4" | 7/8" | 1" |
|---|---|---|---|---|---|---|---|---|---|---|
| 4.8mm | 6.3mm | 7.9mm | 9.5mm | 11.1mm | 12.7mm | 14.3mm | 15.9mm | 19mm | 22.2mm | 25.4mm |
|
| ||||||||||
| 1 1/8" | 1 1/4" | 1 1/2" | 1 3/4" | 2" | 2 1/4" | 2 1/2" | 2 3/4" | 3" | 3 1/2" | 4" |
| 28.6mm | 31.8mm | 38.1mm | 44.5mm | 50.8mm | 57.2mm | 63.5mm | 69.9mm | 76.2mm | 88.9mm | 101.6mm |
Application area:
Offshore platforms, helicopter decks, other platforms
food industry
Pulp and paper industry
Aerospace (turbine blades)
mechanical part
Nuclear waste barrel
chemical composition:
| C | Cr | Ni | Cu | Nb/Cb | Mn |
|---|---|---|---|---|---|
| 0.04 | 16.5 | 4.5 | 3.3 | 0.3 | 0.7 |
| PREN (%Cr+3.3%Mo+16%N)≥17 | |||||
Mechanical properties
| Hardened | YS 0.2% | UTS | ||
|---|---|---|---|---|
| Min. | Typ. | Min. | Typ. | |
| A | 1070 | 1207 | 1170 | 1310 |
| B | 790 | 931 | 965 | 1034 |
| Hardened | YS 0.2% | UTS |
| El% | |||
|---|---|---|---|---|---|---|---|
| Min. | Typ. | Min. | Typ. |
| Min. | Typ. | |
| A | 155 | 175 | 170 | 190 |
| 8 | 14 |
| B | 115 | 135 | 140 | 150 |
| 10 | 17 |
Hardened at 496 ° C (925 ° F)-4 hours-air cooled
Hardened 593 ° C (1100 ° F)-4 hours-air cooled
The above are two examples of heat treatment.
NAS630 S17400 17-4PH precipitation hardened stainless steel Shaft
Hardness/Temperature tempered for 4 hours after austenitizing at 1040°C (1904°F) for 30 min quenched 100°C/sec (212°F/sec).
Company Details
Business Type:
Manufacturer
Employee Number:
>100
Ecer Certification：
Active Member
Shanghai Aboom Metal prodcut co.,ltd mainly produces and sells super duplex stainless steel, special super austenitic stainless steel and high temperature alloys, nickel-based alloys, corrosion-resistant alloys, precisio... Shanghai Aboom Metal prodcut co.,ltd mainly produces and sells super duplex stainless steel, special super austenitic stainless steel and high temperature alloys, nickel-based alloys, corrosion-resistant alloys, precisio...
Get in touch with us
Leave a Message, we will call you back quickly!