Mdf Laminate Hot Press Machine OSB Continuous Press

Fully Automatic 300~1500 Cbm Per Day Particle Board Continuous Press Production Line

Description

The 300~1500m³/day particle board production line uses raw material through chips preparation, flakes preparation, dring and sitfting, glue dosing system, forming and hot pressing, cooling &trimming and sanding section to make particle board / chipboard. The final size can be 4 x 8, 6 x 8, 6 x 9, 4 x 12, 6 x 12, 6 x 18. The particle board has homogeneous structure, smooth surface, good machining specification and manufacture performance. It is the ideal substitute of nature wood.

Oriented strand board (OSB), also known as flakeboard, is a type of engineered lumber similar to particle board, formed by adding adhesives and then compressing layers of wood strands (flakes) in specific orientations. It was invented in California in 1963. OSB may have a rough and variegated surface with the individual strips of around 2.5 cm × 15 cm (1.0 by 5.9 inches), lying unevenly across each other and comes in a variety of types and thicknesses.

OSB is a material with favorable mechanical properties that make it particularly suitable for load-bearing applications in construction. It is now more popular than plywood, commanding 66% of the structural panel market. The most common uses are as sheathing in walls, flooring, and roof decking. For exterior wall applications, panels are available with a radiant-barrier layer pre-laminated to one side; this eases installation and increases energy performance of the building envelope. OSB also sees some use in furniture production.

Adjustments to the manufacturing process can impart differences in thickness, panel size, strength, and rigidity. OSB panels have no internal gaps or voids, and are water-resistant, although they do require additional membranes to achieve impermeability to water and are not recommended for exterior use. The finished product has properties similar to plywood, but is uniform and cheaper. When tested to failure, OSB has a greater load-bearing capacity than milled wood panels. It has replaced plywood in many environments, especially the North American structural panel market. Unfortunately, its use as sheathing has contributed to the leaky condo crisis, as it is less able to breathe and release moisture than plywood.

CMT is a professional supplier of OSB production line, providing project design, equipment manufacture and equipment installation & commissioning services. Cooperating with the international best partners (such as KADANT, MAIER, GRECON...), to provide the client a high-quality project with reasonable price.

CMT is active in wood based panel industry since 2000. In the last 15 years, we have finished the capacity of more than two million cubic meters of wood based panel factory around the world.

Excluding new built OSB production line, CMT also providing the renovation and upgrading service of the whole factory (such as from MDF to OSB, from PB to OSB).

Summary of process flow

• Chips Preparation Section
• Flakes Preparation Section
• Drying and Sifting Section
• Glue Dosing System
• Forming Line
• Continuous Press System
• Master Board Handling System
• Automatic Storage System
• Sanding and Cut-to-size Section
• Surface Grading System
• Automatic Package Section

Main technical data

Key equipment of production line

• Drum chipper

• Knife-ring flaker

• Dryer

1 High energy efficiency and waste energy can be recycled to save energy

2 More safe due to low oxygen drying to prevent fire

3 Flaker shape will be well maintained

4 Stable flaker moisture

5 Large unit capacity

• Screen and sifter

1 Large capacity and good performance

2 Frame screen box makes strong and durable

3 Brilliant elastic vibration support

4 Perfect rotary balance technology

5 Self-clean system with jumping balls

6 Stable running and long lifetime

7 Compact structure and less space required

• Forming station

1 Feeding crosswise— real-time regional control technology

2 Volume equal silo— ensure consistent bulk density

3 Aerodynamics— perfect balance of positive/negative pressure airflow

4 Airflow regulation system— artful combination of vertical& horizontal adjustment

5 Airflow surface forming— fine and smooth surface

6 Advanced control technology— high precision lengthwise and crosswise density

1 Crosswise feeding— real-time regional control technology

2 More delicate diamond rollers— ensure forming precision

3 Positive/negative pressure assistant airflow— ensure better fine surface

4 Core cage roller forming— uniform core mat structure

5 Advanced control technology— high precision lengthwise and crosswise density

• Hot press

• Stacking system

• Automatic storage system

• Sanding and cut-to-size line