Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
{"title":"6.0-20.0 Copper Coil Slitting Line \u00b11.0mm High Accuracy Up To 60 M \/ Min","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/cb\/59\/87ff76c2a1e22efb476690b35183-200x200-1\/6_0_20_0_copper_coil_slitting_line_c2_b11_0mm_high_accuracy_up_to_60_m_2f_min.jpg","attrs":{"Brand Name":"RISHBIN","Model Number":"RS 6.0-20.0","Certification":"CE","Place of Origin":"Wuxi\uff0c China"}}
{"title":"High Automatic Steel Sheet Slitting Machine Side Trimmers With Center Cut Shear","imgUrl":"https:\/\/img.silkroadsl.com\/nimg\/36\/f3\/43b467d2efe68a00fa0dfd186f6c-200x200-1\/high_automatic_steel_sheet_slitting_machine_side_trimmers_with_center_cut_shear.jpg","attrs":{"Model Number":"RS0.3-3.0","Coil Thickness":"0.3\uff5e3.0mm","Product Name":"Steel Sheet Slitting Machine","Number of Strip":"8\uff5e20"}}
Edge trim:
This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.
Without a tension stand, the slit material from the center of the master coil would take up more quickly while the outboard strips would hang loosely. The recoiler is an expanding mandrel type. The recoiler takes up the slit mults. The recoiler mandrel is fitted with an overarm device which is a shaft with separator discs which prevent interleaving of the narrower coil widths.
The position of the discs are directly in-line with the slitting knives. The finished slit mults are banded on the outside diameter and are pushed off of the recoiler mandrel onto an awaiting coil car or turnstyle.
Steel Sheet Slitting Machine Introduction
Minimum Burr on strip.
Automatic Coil Loading
2 complete slitting heads for quick offline tooling changeovers.
Straight edged recoiling.
Economic efficency due to high automation level.
Ease of Operation and Maintenance
Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
It is available in different capacities and standards according to the demand of the clients.
These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.
Knives:
These knives partially penetrate the coil stock causing a crack or fracture on both sides of the stock, separating the mults from one another. Rubber stripper rings are also employed depending on the material thickness to attain a good edge so no burr is present that will hinder downstream operations. As the material is slit, the far outside edges of the coil have edge trim.
Steel Sheet Slitting Machine Specification:
Model No.
RS 3.0-12.0
RS 4.0-16.0
RS 6.0-20.0
Coil Material
CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness
3.0～12.0mm
4.0～16.0mm
6.0～20.0mm
Line Speed
0～60m/min
0～50m/min
0-50m/min
Coil Weight
≤30T(35T)
≤30T(35T)
≤30T(35T)
Coil I.D
φ508,φ610,φ760mm
φ508,φ610,φ760mm
φ508,φ610,φ760mm
Coil O.D
≤φ2200mm
≤φ2500mm
≤φ2500mm
Strip Width
≥100mm
≥100mm
≥100mm
Number of Strip
5～20
≤5
≤5
Slitting Accuracy
±1.0mm
±1.0mm
±1.0mm
Blade shaft
Ф320
Ф340mm
Ф360mm
Electrical Control System
PLC Automatic control
PLC Automatic control
PLC Automatic control
COIL/ROLL DETAILS
Material
HR, CR, SS, GI, PPGI,
Tensile Strength
δb≤550Mpa,δS≤260Mpa
Coil/Roll thickness
6-20mm
Steel Coil/Roll width
600-2500(Max)
Coil/Roll I.D
Φ500-760 mm
Coil/Roll O.D
Φ2500mm(Max)
Steel Coil/Roll Weight
35T(Max)
Slitter parameters
knife pivot diameter
Ф360 mm
Knife pivot material
40Cr
Blades specification
Φ360mmXφ360mmX20mm
Blade material
6CrW2Si
Max slit quantity
4 pcs (16mm) 8 pcs(8mm)(Customized)
Width precision
≤±0.05mm/2M
Other parameters
Power
380V/50Hz/3Ph(Customized)
Line speed
0-60m/min
Capacity
450 KW
Whole line Dimension
45m(L)X10m(W)
Line direction
From right to left(Face to machine)
Machine color
Blue
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer
Year Established:
1999
Total Annual:
1000000-1200000
Employee Number:
100~120
Ecer Certification：
Active Member
Welcome to Rishbin, an innovative supplier in Metal Coil Processing Machinery market.
Rishbin was founded in 1999. With almost twenty years development, now it becomes a leading professional supplier in the field of Metal Coil Processing Machinery industry, and exports its quality production line... Welcome to Rishbin, an innovative supplier in Metal Coil Processing Machinery market.
Rishbin was founded in 1999. With almost twenty years development, now it becomes a leading professional supplier in the field of Metal Coil Processing Machinery industry, and exports its quality production line...
