EVERCROSS BRIDGE TECHNOLOGY (SHANGHAI) CO.,LTD.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Delivery Time | negotiation |
| Packaging Details | According to detailed order |
| Product Name | Fiber Demister |
| Size | 12" Width × 120" Length × 4" Thickness |
| Capacity | Self-Cleaning Ability |
| Feature | High Efficiency, Long Life and Low Cost |
| Function | Reduce or Eliminate Visible Chimney Smoke |
| Brand Name | Evercross |
| Model Number | COMPACT-200; COMPACT-100; CHINA 321 ; PB 100; LSB; GWD; DELTA; 450,etc |
| Certification | CNAS; COC; PVOC; SONCAP; CIDB;FORM E;FORM L; FORM M, etc |
| Place of Origin | China |
View Detail Information
Explore similar products
High Efficiency Fiber Filter Reduce Environmental Pollution
Fabric Filter Material Fiber Demister Green And Environmental Protection
Research And Development Long Life Fiber Filter China Manufacturer
High Efficiency Fiber Demister With Mesh Filter Material
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Delivery Time | negotiation |
| Packaging Details | According to detailed order | Product Name | Fiber Demister |
| Size | 12" Width × 120" Length × 4" Thickness | Capacity | Self-Cleaning Ability |
| Feature | High Efficiency, Long Life and Low Cost | Function | Reduce or Eliminate Visible Chimney Smoke |
| Brand Name | Evercross | Model Number | COMPACT-200; COMPACT-100; CHINA 321 ; PB 100; LSB; GWD; DELTA; 450,etc |
| Certification | CNAS; COC; PVOC; SONCAP; CIDB;FORM E;FORM L; FORM M, etc | Place of Origin | China |
| High Light | Long Life Fiber Filter ，Research And Development Fiber Filter ，China Manufacturer Fiber Filter | ||
Introduction of fiber demister :
The fiber demister also known as a fiber mist eliminator or fiber bed filter, is a device used to remove fine liquid droplets or mist from a gas stream. It plays a crucial role in separating entrained liquids from process gases in a variety of industries.
The fiber demister consists of two concentric screens or parallel flat screens filled with compressed fiber pads.
Fiber demister are individually designed and manufactured with enclosures made of a variety of alloys, thermoformed plastics or fiberglass reinforced plastics.
| Type | Effect | Process parameter | Remark | |||
| Pressure loss (mmH2O) | Gas velocity range (m/s) | |||||
| TGW15 | 100% > 1μm | 37~225(dry) 75~450(wet) | 0.05~0.25 | High-speed | ||
| 98% 0.5 - 1μm | ||||||
| B14 | 100% > 3μm | 78~335 | 0.1~0.35 | High-speed | ||
| 98 - 99% < 3μm | ||||||
| B12 | 100% > 3μm | 40~260 | 0.1~0.6 | High-speed | ||
| 95% 1 - 3μm | ||||||
| 80% 0.5 – 1μm | ||||||
| G35 | 100% > 3μm | 30~470 | 0~2.5 | High-speed | ||
| 85 – 90 % 0.5 - 3μm | ||||||
| 60 – 70% 0.5 – 1μm | ||||||
| G25 | 100% > 3μm | 12~400 | 0~2.5 | High-speed | ||
Key characteristics and features of fiber demisters:
High Efficiency:
Fiber demisters can achieve very high removal efficiencies, typically greater than 99% for droplets down to 1-2 microns in size.
The efficiency is dependent on factors like fiber diameter, bed depth, and gas velocity.
Low Pressure Drop:
The open, porous structure of the fiber bed results in a relatively low pressure drop across the demister.
This helps minimize the energy required to move the gas stream through the system.
Features of fiber demister :
Reduce or eliminate visible chimney plume.
Design capacity can be adjusted without limitation.
Ensure that the pressure drop is less than 40 mm (1.5 ") W.G.
Interchangeable with existing fiber pad equipment.
Capture submicron particles with a diameter of 0.1 micron or less.
Property of fiber demister :
The selection of fiber demister should be accurately calculated according to the gas flow, pressure and temperature under the actual working conditions of the enterprise to confirm the size, form, number and placement of the demister components to ensure that the national standards for pollutant emission in relevant industries are fully met.
Structure of fiber demister :
The typical fiber demister is composed of tubular fiber bed element (size is customized according to the working condition), bracket, flange, outer cover pressure vessel and other components.
Application of fiber demister :
Fiber demister is specially used to remove various fog particles in the air stream, not only can remove large particles in the air stream (diameter > 3μm), but also very effective for removing sub-particles (diameter < 1μm). Has a certain self-cleaning ability, can achieve zero maintenance.
It can be widely used in the industrial production process to remove sub-micron liquid droplets and soluble solid particles in the gas, to protect downstream equipment, purify process gas, recover available solvents and oils, and eliminate air pollution.
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2005
Total Annual:
50 Million-80 Million
Employee Number:
120~150
Ecer Certification：
Verified Supplier
Production Factory: Total Area: 47,000㎡ Production workshop: 22,000㎡ Lifting Capacity:100 tons Annual output:100,000 tons Main Products: Bailey bridge(Compact-200, Compact-100, LSB, PB100, China-321,BSB) Modular bridge( GWD, Delta, 450-type,etc), Truss Bridge,Wa... Production Factory: Total Area: 47,000㎡ Production workshop: 22,000㎡ Lifting Capacity:100 tons Annual output:100,000 tons Main Products: Bailey bridge(Compact-200, Compact-100, LSB, PB100, China-321,BSB) Modular bridge( GWD, Delta, 450-type,etc), Truss Bridge,Wa...
Get in touch with us
Leave a Message, we will call you back quickly!