ERW Sch 40 Carbon Steel Pipe Spiral Welded Round Shape 3 - 50mm Thickness

Product Specification

Carbon Erw Steel Pipe Spiral Welded Schedule 40 Round Shape 3 - 50 Mm Thickness OD1/2'-48'

Product Description

1. Standards: ASTM A106
2. Applications: bending, curling and similar forming processes.
3. Available steel grades: grade A,B,C

4. Diameter 10.3 to 1219 mm; thickness 0.8 to 19 mm; length: 6 m and above; and, in accordance with customer demand, the supply of steel pipes to other specifications.

Application

For Manufacture heating-pipelines, containers, coal-saving devices, superheaters and reheaters of high pressure boiler

The difference between precision steel pipe and seamless pipe

1. the seamless steel tube with obvious difference is that dimensional accuracy, can be up to 0.1mm.

2. high precision steel pipe diameter surface finish, the customer without processing can be used

directly and ordinary seamless steel tube to the customer and lather, polishing processing.

Features
1. The smaller outer diameter

2. High precision to do small batch production

3. Cold drawn finished products of high precision, good surface quality

4.The steel pipe transverse area is more complex

5. Steel pipe is superior performance, dense metal

Quality Standard:

SY/T 6194 :Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
API 5CT :CASING AND TUBING
BS EN ISO 11960 :Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells

NF M87-207 :Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
JIS G3439 :SEAMLESS STEEL OIL WELL CASING, TUBING AND DRILL PIPE
IS:4270:Steel tubes for well spainend casing pipes

Steel Grade:H-40, J-55, K-55, M-65,N-80, C-75, L-80, C-90, T-95, P-110,Q-125

Process: ERW and Seamless

BOYUE is a well known worldwide exporter of A691 Grade 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91 Alloy Steel EFW Pipe, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals inA691 Grade 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91 Alloy Steel EFW Pipe in India & Overseas, offering a wide range of A691 Grade 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91 Alloy Steel EFW Pipe

• API 5CT Latest Edition
• OCTG from 1.660" to 30'' + respective couplings, crossovers and pup joints
• API Grades from H40 to Q125 and 13% CR
• ALL API Standard Weights
• API and Premium Joint Connections
• Special SS and HC grades
• CRA Grades

Section: Seamless & Welded

Sizes:

Outside Diameter: 1.660" - 30"

Length:
Range 1, Range 2 & Range 3:

Applicable Tests:
See our Standard Inspection Scope

Protection:

External bare and uncoated or externally coated with black/ transparent anti rust Mill varnish
Plastic or Metal Pin and Box Protectors.
Internal plastic coating or sleeves.

Mill Test Certificates:
Issued in accordance with API Specification 5CT Eighth Edition
Additional Third Party Inspection can also be performed on request.

Application:Tube for conveying gas, water, and oil in both and natural gas industries etc.

Casing:Casing is a large diameter pipe that serves as the structural retainer for the walls of oil and gas

wells, or well bore.It is inserted into a well bore and cemented in place to protect both subsurface

formations and the wellbore from collapsing and to allow drilling fluid to circulate and extraction to take

place. Steel Casing Pipes have smooth wall & minimum yield strength of 35,000 psi.

Tubing: Tubing is pipe used for the transportation of crude oil and natural gas from an oil or gas layer to

the surface after drilling is complete. It is made to withstand the pressure generated from the extraction

process. Tubing is manufactured in the same way as casing, except that an additional process known as

"upsetting" is applied to thicken the pipes.

Test:

1>.Chemical Component Analysis.

2>.Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation).

3>.Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc).

4>.Exterior Size Inspection.

5>.Nondestructive Test (Ultrasonic flaw detector, Eddy current flaw detector), Hydrostatic Test.

Mill Test Certificate: EN 10204/3.1B

Some of the OCTG tubing and casing available for your company’s requirements include:

• General drill pipes, casing pipes and tubing conforming to API standards for oil field and deep well drilling
• API H40 tubing/pipe – general purpose pipes conforming to API specification 5CT
• API J55 general purpose pipes for tubing applications, similar to specification K55 with lower minimum tensile strength conforming to API specification 5CT
• API K55 general purpose pipes used primarily in casings conforming to API specification 5CT
• API L80 tubing/pipes conforming to API specification 5CT with a controlled yield strength with hardness test requirement of 23 HRC maximum; usually used in wells with sour (H2S) environments or deep sour wells
• API N80 or N80 Q&T (Quench and Tempered) – general purpose pipe manufactured to API specification 5CT
• API Normalized N80 – lower-cost alternative to standard Q&T N80; pipe walls less than 0.500 inch; inspections, testing and dimensions are in accordance with API 5CT for grade N80. Charpy v-notch impact test absorbed energy results conform to API SR16 and are lower Q&T N80
• API C90 – an API controlled yield strength grade (25.4 HRC maximum) generally used in sour condensate wells; with required extensive hardness testing, SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
• API C955 – same strength range as T95 and U. S. Steel C95, but without a hardness requirement; generally not used in sour wells
• API T95 – API controlled yield strength grade (25.4 HRC maximum), the same as API C95 and U. S. Steel C95; generally for use in sour condensate wells; extensive hardness testing is required including SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
• API P110 – generally used in deep wells; this grade is not suitable for most sour condensate wells
• API Q125 – API grade for deep well service, generally not for use in sour condensate wells; quadrant hardness testing is required (no specified hardness limits other than the variation between readings); impact testing required for each heat and/or lot; typically EMI and UT NDT inspections are required

 
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's requirement.
Port:Shanghai/Tianjin
 
Commerce Clause
 

 
 
Why Choose Us
 
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
 
FAQ
 
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.