BSL3 Double Door Laboratory Autoclaves With Effluent Decontamination System

Product Specification

Double Door Laboratory BSL3 Autoclaves With Effluent Decontamination System

Features

• Special design for BSL3 laboratories
• Extreme process reliability
• User-friendly HMI
• Parameters could be easy adjusted for perfect compliance with various customer requirement
• Efficient drying based on a high performance vacuum system
• Minimal media consumption
• Strictly isolated technologies adopted to ensure safety
• No recontamination for environment and human being

BSL3 Special

Consolidated BSL-3 Series Sterilizers are designed to sterilize at temperatures between

220°F and 275°F (104°C and 135°C) through the use of steam.

The BSL-3 Series meet the tough requirement of biocontainment facilities and are typically

installed in Biosafety Level 3 rated laboratories located within any life science, biotechnology,

or animal  research (vivarium) facility.

Main Parameters

Pass-through Door Interlock System

• For pass-thru models only.
• Prevents opening of the sterilizer door on the non-contained side until completion of a
• sterilization cycle.
• Also prevents both doors from being opened simultaneously.
• This system is programmed to accommodate the desired direction of product flow.

Effluent Decontamination System

• Consolidated Sterilizer Systems was one of the first companies to investigate and discover the potential hazards of contaminated sterilizer effluent.
• For labs working with BSL3 micro organisms all waste and effluent must be rendered sterile.
• Sterilization of bacteria and pathogens is accomplished through the use of an FDA approved, ultra high-efficiency filter.

Innovative Automatic Safety Door Lock

• Easy and safe. When the autoclave lid is closed, the lid is automatically locked by a circumferential ring system.
• A special lip seal made of heat resistant silicone provides eliable sealing. As steam pressure builds within the sterilizer, the seal becomes tighter.
• The lid also opens easily –either at the push of a button or automatically at the end of a sterilization cycle.