Shanghai Wind Automation Equipment Co.,Ltd
| Condition | New |
| Pressure | Hydraulic press |
| Workpiece | Armature shaft or commutator |
| Closing Height | 200mm |
| After sales | Engineers available to service machinery overseas |
| HS Code | 84629190 |
| Brand Name | WIND AUTOMATION |
| Model Number | WIND-STY10 |
| Place of Origin | China |
View Detail Information
Explore similar products
Durable Hydraulic Press Machine Stack Lamination Replacement Hydraulic Devices
Ball Bearing Press Machine For Rotor Armature With Pressure Control
AC Motor Stator Coil Middle Forming Machine Winding Expaner WIND-160-MF
Armature Commutator Hydraulic Press Machine Motor Parts Placement Device
Product Specification
| Condition | New | Pressure | Hydraulic press |
| Workpiece | Armature shaft or commutator | Closing Height | 200mm |
| After sales | Engineers available to service machinery overseas | HS Code | 84629190 |
| Brand Name | WIND AUTOMATION | Model Number | WIND-STY10 |
| Place of Origin | China | ||
| High Light | hydraulic bearing press ，bearing press machine | ||
Ball Bearing 6203 6304 Press To Armature Rotor By China Hydraulic Device WIND-STY10
Application:
Press ball bearing to armature (rotor)
Advantages:
1. The ball bearing can be both sides or single side
2. Hydraulic press have constant pressure for place ball bearing in right place
3. With pressure detection device
Parameter:
Custom made machine
This interface mainly displays the running status and alarm prompts
1) Total output and Shift output
The cumulative output mainly records the total amount of products produced since the machine is put into operation, and cannot be reset.
The shift output is the output produced on duty, and the output can be reset to zero the next day after the shift.
2) Pressed actual position and pressed to setted position
The pressed actual position refers to the specific position where the bearing is pressed into the rotor shaft, which is the current coordinate point of the value grating ruler.
The pressed to setted position is the set target value of the bearing press-fit.
3) Pressure time
Pressure time is the delay time (maximum 9.9) before the cylinder returns after the bearing is pressed into the target position.
4) One rotor time
One rotor time is the time from pressing the start button to finishing the product
5) Step/Auto & Lighting
Step/Auto refers to the current running state,
Auto is to press to start and automatically press to the end.
If in Step state, the machine will run step by step by pressing both hands.
The lighting is automatically turned on after entering the running interface, this screen can switch the lighting switch
| 1) Parameter number and Parameter name
| The Parameter number refers to the number of the parameter to be set, and the Parameter name is the name of the corresponding parameter number. For example (parameter number is 0, parameter name is 500.000 and cannot be set to letters) After setting the parameter number and the corresponding name, you can directly input the related parameter number to use for according rotor.
|
| 2) Cylinder position and Reset grating ruler
| The oil cylinder position refers to the displayed value of the current position of the grating ruler. The Reset grating ruler means the current position of the grating scale is reset to 0.
|
| 3) Cylinder fast forward and Cylinder slow forward and Cylinder rewind
| Cylinder fast forward and Cylinder slow forward is the position where the oil cylinder changes from fast to slow speed during the pressing process of the oil cylinder. Cylinder rewind is pressed to the setting end point of the grating ruler
|
Below information are needed when you send inquiry:
1. The bearing size such as 6203,6304 and so on
2. The pressure of bearing
3. Rotor drawing with bearing location on rotor
Operation instruction video links
The press WIND-STY10 before shipment in the year 2021 (repeated order of some motor manufacturer)
the press machine cycle time (20s'/pc for the biggest shaft stroke rotor)
and setup video for changing fixture,
For reference of press WIND-STY10 in the year 2017
1)Video for machine demo
2)Simple instruction
3)The video https://youtu.be/7QeVJvbIF8c
is just demo for how to set up position when you have to change tooling,
You put on ball bearing and rotors, then press the button with both hands,
then the ball bearing were pressed
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
4 Million-5 Million
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Shanghai Wind Automation Equipment Co.,Ltd supply motor automation solution for global motor manufacturers. Setted up in the year 2010 by Senior Engineer Mr.Wang who involve in electric motor filed since 1998. Through continuous innovation and participating in globalization, it has now developed int... Shanghai Wind Automation Equipment Co.,Ltd supply motor automation solution for global motor manufacturers. Setted up in the year 2010 by Senior Engineer Mr.Wang who involve in electric motor filed since 1998. Through continuous innovation and participating in globalization, it has now developed int...
Get in touch with us
Leave a Message, we will call you back quickly!