JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T |
| Supply Ability | 50000KGS |
| Delivery Time | 7 Days |
| Packaging Details | Wooden Box |
| Width | 600-2500mm |
| Grade | Q235,Q345,SS400 |
| Application | Boiler Plate |
| Technique | Hot Rolled,Cold Rolled |
| Type | Steel Plate,Steel sheet |
| Standard | ASTM,GB,AISI,JIS,DIN |
| Length | 1000-12000mm |
| Special use | High-strength Steel Plate,Wear Resistant Steel,Industry Construction,Pressure Vessel Boiler |
| Thickness | 6-400mm |
| Shape | Flat Steel Plate |
| Brand Name | MITTEL TISCO BAO STEEL |
| Model Number | C-1040 |
| Certification | SGS ISO MTC |
| Place of Origin | China |
View Detail Information
Explore similar products
Corten PlateQ355GNH Corten Steel Plate ASTM A588 CORTEN A Steel Plates S355J2WP
ST52-3 S355jr SS400 S235jr S275jr Q235 Q345 ASTM A36 High Strength Hot Rolled
ASTM A36/A36M Hot Rolled MS Carbon Steel Plate Hot Rolled Steel Plate A36
ASTM A588 High Strength Low Alloy Corten Steel Plate Corten A S355JOWP 3-20MM
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 50000KGS |
| Delivery Time | 7 Days | Packaging Details | Wooden Box |
| Width | 600-2500mm | Grade | Q235,Q345,SS400 |
| Application | Boiler Plate | Technique | Hot Rolled,Cold Rolled |
| Type | Steel Plate,Steel sheet | Standard | ASTM,GB,AISI,JIS,DIN |
| Length | 1000-12000mm | Special use | High-strength Steel Plate,Wear Resistant Steel,Industry Construction,Pressure Vessel Boiler |
| Thickness | 6-400mm | Shape | Flat Steel Plate |
| Brand Name | MITTEL TISCO BAO STEEL | Model Number | C-1040 |
| Certification | SGS ISO MTC | Place of Origin | China |
| High Light | Wear Resistant Carbon Steel Boiler Plate ，2000*6000mm Carbon Steel Plate ，C-1040 Carbon Steel Plate | ||
| Physical Properties | |
| Density (lb / cu. in.) | 0.284 |
| Specific Gravity | 7.86 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.107 |
| Melting Point (Deg F) | 2770 |
| Poissons Ratio | 0.3 |
| Thermal Conductivity | 360 |
| Mean Coeff Thermal Expansion | 6.7 |
| Modulus of Elasticity Tension | 30 |
| Modulus of Elasticity Torsion | 11 |
CARBON 1040 STEEL STRUCTURAL PLATE- Used when greater strength and hardness is desired in the as rolled condition. Good for hammer forge processes. Uses include gears, shafts, axles, bolts sand studs. 1040 is a medium-carbon steel composed of 0.37 to 0.44 percent carbon, 0.6 to 0.9 percent manganese, a maximum of 0.04 percent phosphorus and a maximum of 0.05 sulphur. The remainder is iron. 1040 steel sometimes contains 0.1 to 0.35 percent silicon, according to Interlloy, an Australia-based alloy engineering steel, tool steel and specialty steel producer.
CARBON 1040 STEEL STRUCTURAL PLATE equivalent to EN8/080M40. An unalloyed medium carbon steel. AISI 1040 is a medium strength steel with good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. 1040 must be pre-heated to 300 to 500 degrees F before welding and reheated to between 1100 degrees F and 1200 degrees F after welding. Otherwise, the area near the weld may develop cracks or become brittle and cause the part to fail during use.
Tensile Strength
Ultimate tensile strength is the maximum load a material will support before it breaks, explains Instron, a materials testing laboratory. Ultimate tensile strength testing is a destruction test. The purpose is to find the point at which a material will fail when supporting a given load or sustaining a set force.
CARBON 1040 STEEL STRUCTURAL PLATE will support 90,000 pounds of force per square inch before it fails, if it was hot-rolled. This strength drops to 85,500 psi when the steel has been normalized, or returned as closely as possible to the state it was in when it was produced. Tensile strength drops even further, to 72,250, when it has been annealed, or brought to its softest point while cold.
Normalizing and annealing are two examples of heat treatments. In heat treatment the temperature of the steel is changed in order to alter its molecular structure and change its reaction to various forces during forging and fabrication, according to metallurgist David Pye's heat treatment tutorial at Moldmaking Technology.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
1998
Total Annual:
80Millen-100 Millen
Employee Number:
200~500
Ecer Certification：
Verified Supplier
Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta... Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta...
Get in touch with us
Leave a Message, we will call you back quickly!