JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T |
| Supply Ability | 50000KGS |
| Delivery Time | 7 Days |
| Packaging Details | Wooden Box |
| Length | Customer's Request,in coil,500-12000MM |
| Grade | 400 Series 440C |
| Application | Construction,Kitchenware,Medical instruments,Industry |
| Type | Cold Rolled Coil |
| Standard | ASTM,AISI,JIS,DIN |
| Width | 10mm-1250mm |
| Surface | 2B |
| Technique | Cold Rolled |
| Thickness | 0.15-3.0mm |
| Edge | Mill Edge Slit Edge |
| Price term | CIF CFR FOB EX-WORK |
| Special use | Stainless steel |
| Brand Name | MITTEL TISCO BAO STEEL |
| Model Number | 440C |
| Certification | SGS ISO MTC |
| Place of Origin | China |
View Detail Information
Explore similar products
Slit edge / mile edge aisi 304L stainless steel coil SGS, BV certificate
Low Carbon Stainless Steel Screw Wire With Grade SAE1006 SAE1008 For Constructio
Color SS Stainless Steel Sheet In Coils TO 201 / 8K Mirror Surface
Stainless Steel 441 Coil AISI441 Stainless Steel Coil 441 Stainless Steel Strips
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 50000KGS |
| Delivery Time | 7 Days | Packaging Details | Wooden Box |
| Length | Customer's Request,in coil,500-12000MM | Grade | 400 Series 440C |
| Application | Construction,Kitchenware,Medical instruments,Industry | Type | Cold Rolled Coil |
| Standard | ASTM,AISI,JIS,DIN | Width | 10mm-1250mm |
| Surface | 2B | Technique | Cold Rolled |
| Thickness | 0.15-3.0mm | Edge | Mill Edge Slit Edge |
| Price term | CIF CFR FOB EX-WORK | Special use | Stainless steel |
| Brand Name | MITTEL TISCO BAO STEEL | Model Number | 440C |
| Certification | SGS ISO MTC | Place of Origin | China |
| High Light | Fruit Blades Stainless Steel Coil Strip ，AISI 440C Stainless Steel Coil ，10mm Stainless Steel Coil Strip | ||
AISI 440C Stainless Steel Coil Strip 15 x 0,61 mm Used For Fruit Knife Blades
Stainless steels are high-alloy steels which have high corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are divided into three types such as ferritic, austenitic, and martensitic steels. Another group of stainless steels are precipitation-hardened steels. They are a combination of martensitic and austenitic steels.
Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics, which make 440C particularly suited to such applications as ball bearings and valve parts.
Typical applications include:
UNS: ASTM/ASTE S44000
DIN: 1.4125
Good resistance to the atmosphere, fresh water, foods, alkalies and mild acids. Best resistance in the hardened and tempered and passivated condition. A smooth polished surface also assists.
The corrosion resistance of grade 440C approximates that of grade 304 in many environments.
Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties by over-tempering.
Annealing – Full anneal – 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing – 735-785°C and slow furnace cool.
Hardening – Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table.
Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance.
If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility.
In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel. Chips are tough and stringy so chip breakers are important. If these grades are hardened machining becomes more difficult and probably impossible.
Compostion
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 440C | min. max. | 0.95 1.20 | - 1 | - 1 | - 0.04 | - 0.030 | 16.00 18.00 | - 0.75 | - | - |
Mechanical Properties
| Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Rockwell (HR C) | Impact Charpy V (J) |
|---|---|---|---|---|---|
| Annealed* | 758 | 448 | 14 | 269HB max# | - |
| 204 | 2030 | 1900 | 4 | 59 | 9 |
| 260 | 1960 | 1830 | 4 | 57 | 9 |
| 316 | 1860 | 1740 | 4 | 56 | 9 |
| 371 | 1790 | 1660 | 4 | 56 | 9 |
| * Annealed properties are typical for Condition A of ASTM A276# Brinell Hardness is ASTM A276 specified maximum for annealed 440A, B and C. | |||||
Physical Properties
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (mm/m/°C) | Thermal Conductivity(W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nW.m) | |||
|---|---|---|---|---|---|---|---|---|---|
| 0-100°C | 0-200°C | 0-600°C | at 100°C | at 500°C | |||||
| 440 C | 7650 | 200 | 10.1 | 10.3 | 11.7 | 24.2 | - | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
1998
Total Annual:
80Millen-100 Millen
Employee Number:
200~500
Ecer Certification：
Verified Supplier
Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta... Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta...
Get in touch with us
Leave a Message, we will call you back quickly!