Nimonic 93 GH93 ASME Alloy Steel Metal Alloy Steel Plate With Smooth Surface

Nimonic93 GH93 alloy round bar pipe plate wire coil Incoloy 800 800H 800HT 901 925 926

Incoloy is a nickel ferrochrome alloy designed for oxidation and carbonation at elevated temperatures.Incoloy alloy has many kinds: common such as Incoloy800, Incoloy800H, Incoloy800HT, Incoloy825, Incoloy840, Incoloy901, Incoloy925, Incoloy20, Incoloy330, Incoloy 25-6mo, etc.The alloy contains a small amount of the metallic elements molybdenum and copper.In reductive acid and oxidizing acid, it has good corrosion resistance, as well as good resistance to stress corrosion cracking, pitting and crevice corrosion.It has excellent corrosion resistance to sulfuric acid and phosphoric acid.The alloy has good cold and hot working properties and is easy to be formed and welded.The main products of this alloy are rods, tubes, plates, strips, wires and forgings, etc. It is mainly used in the chemical, petrochemical, nuclear and rare metal refining industries.

Nickel-based superalloys refer to high-temperature alloys with high strength and good resistance to oxidation and gas corrosion in the range of 650-1000 ° C with nickel as the matrix (generally greater than 50%). Nickel-based superalloys (hereinafter referred to as nickel-based alloys) were developed in the late 1930s. In 1941, the United Kingdom first produced the Ni-based alloy Nimonic 75 (Ni-20Cr-0.4Ti); in order to increase the creep strength and added aluminum, Nimonic 80 (Ni-20Cr-2.5Ti-1.3Al) was developed. In the mid-1940s, the Soviet Union in the late 1940s, China also developed nickel-based alloys in the mid-1950s.

Chemical Composition Of Nimonic 93

Shanghai haosteel Co., Ltd. Material grade: Nimonic93 is close to the brand: GH93 (China), NCK2OTA (France)

Nimonic93 heat treatment system: 1050 ~ 1080 ° C, 8h, air cooling + 710 ° C ± 10 ° C, 16h, air cooling.
6, Nimonic93 variety specifications and supply status: can supply d20 ~ 22mm hot rolled bar, δ 0.4 ~ 4mm sheet, d120mm below forgings and forgings, the board is delivered in solid solution state, other varieties are forged and rolled Status delivery.
7, Nimonic93 smelting and casting process: vacuum induction melting + vacuum arc or electroslag remelting process.
8. Nimonic93 Application Overview and Special Requirements: The aero-engine parts manufactured by this alloy are used in the UK and France. They are used in China to manufacture free turbines, gaskets, gaskets, locks, etc.
Nimonic93 physical and chemical properties:
1, Nimonic93 thermal performance:
(1), Nimonic93 melting temperature range: 1360 ~ 1390 °C.
(2), Nimonic93 thermal conductivity:

(3), Nimonic93 specific heat capacity:

Nimonic 93 density: ρ = 8.19 g/cm3. Nimonic93 electrical properties Nimonic93 magnetic properties: alloy non-magnetic
Nimonic93 Chemical Properties Nimonic93 Oxidation Resistance Nmonic93 Corrosion Resistance: The alloy has good heat and corrosion resistance.

Specifications

Nimonic93 organizational structure:
1. Nimonic93 phase transition temperature: The γ' phase begins to dissolve at 950 °C.
2, Nimonic93 time-temperature-tissue transition curve
3, Nimonic93 alloy structure: γ' phase precipitated on the austenite matrix, M23C6 type carbide is distributed in the grain boundary, MC type carbide is mainly distributed in the grain, no M7C3 type carbide.

Nimonic93 process performance and requirements:
1. Formability of Nimonic93: The alloy has good hot working plasticity, and allows the upsetting deformation to be 80% without cracking in the temperature range of 1050 to 1150 °C. The forging blank heating temperature is 1130~1150°C, the final forging temperature is not lower than 950°C, the rolling heating temperature is 1150~1170°C, and the finishing rolling temperature is not lower than 1000°C.
2. Nimonic93 welding performance: The plate can be connected by argon arc welding. The weldability in the solid solution state is good. After welding, the stress should be eliminated and aging treatment should be carried out.
3, Nimonic93 parts heat treatment process: Turbine disk blanks can be first treated by solution treatment, after processing, aging treatment under argon gas protection, or can be machined after the cake is completely heat treated. The single layer of the blank is placed in a uniform temperature zone of the heat treatment heating furnace to slowly heat up, and is cooled and dispersed after cooling.
4, Nimonic93 surface treatment process: the turbine disc groove part can be electropolishing or shot peening.
5, Nimonic93 cutting and grinding performance: the alloy in the solid solution state cutting performance is better than the aging state.
6, variety specifications and supply status:
1. Variety classification: Shanghai Haosteel Co., Ltd. can produce seamless pipes, steel plates, round steels, forgings, flanges, rings, welded pipes, steel strips, wire materials and supporting welding materials of various specifications.
2, delivery status: seamless pipe: solid solution + acid white, length can be fixed; sheet: solid solution, pickling, trimming; welded pipe: solid solution acid white + RT% flaw detection, forgings: annealing + car light; The bar is in the state of forging, surface polishing or car light; the strip is cold-rolled, solid solution soft, and descaled; the wire is solid-dissolved and acid-washed, or straight, solid solution Light state delivery.