Gauges Hygienic Sample Valves Thread Connection Type For Food Beverage

Product Specification

Gauges Hygienic Sample Valves Thread Connection Type For Food Beverage

Application

HYHAU series sanitary gauge is mainly applied to tank equipment to observe the conditions of inside liquids. It can be also used for sampling.

Materials

Materials: AISI-316L
Size: 1/4''-3/4''
Seals: PTFE

Technical Specification

• End connection: threaded, clamp, welded as customers require.
• Size available: 1/4", 3/8", 1/2", 3/4"
• Max. working pressure: 147psi (10bar)
• Min. working pressure: vacuum
• Working temperature: 14 ~ 248°F (-10 ~ 120°C), EPDM

HYHAU type is used for low viscosity materials, such as water, beer, wine, fluid milk and so on. When rotate the handle wheel clockwise, the valve will be open for sampling. When rotate the handle wheel anti-clockwise, the valve will be closed.

HYHAU Valves series Sample valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain.

HYHAU Sampling valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain.

The Sample Valve type is used to treat high viscosity materials, such as yoghourt, syrup, ice cream, etc. The valve is normally closed design, it will open when pushing the handle and will return to nominal close position automatically by spring.

Design:

• Sanitary sampling valve consists of three parts – a valve body, a valve head and a membrane. The rubber membrane is placed on the stem of the valve head and works as a stretchable plug.
• The membrane functions are both – as a dynamic packing in the valve seat and as a hygienic, static packing against the valve body.
• The unique design eliminates dead spaces and preventing microbial and particulate build-up -which may interfere with microbiological test results.
• Perfect hygienic design and surface finish of the inner part of sanitary sampling valve enables absolute sterilization in a closed state.
• Sterilization and sampling can be carried out regularly without interrupting the production process.
• Easily attached to a liquid distribution line or a storage tank.
•  

Standard Design

Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A rubber diaphragm valve is put at the axis of valve head, acting as an extensible valve core.

• End connections can be welded, clamped or threaded, only one size DN8 available.
• Handle type: rotary handle, key handle
• Valve open: sampling valve close: sterilization

Technical Specification

Nominal Pressure:

Max. product pressure: 87psi (6bar)

Temperature:

Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Sample Valves and Equipment,offers a wide array of sanitary sample valves for many applications including beverage, semiconductor and biopharmaceutical water systems. Our stainless steel sampling valves allow the user to easily extract a sanitary sample of a liquid for analysis.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.