3.8L Vacuum Beer Growler Dispenser With CO2 Regulator

Product Specification

3.8L professional vacuum growler beer dispenser with CO2 regulator

Specification

Feature

1. DOUBLE-WALL VACUUM INSULATED: Vacuum design for a long time fresh, keep the beverage hot up to 12 hours or icy up to 24 hours.

2. STAINLESS STEEL MATERIAL: The drink tank growler, tap dispenser kit is constructed with solid food grade stainless steel which keeps beer flavors and fresh. 

3. 30PSI SINGLE STAGE CO2 REGULATOR: Single-stage CO2 regulator, insert a 16g CO2 Cylinder (not included) and dial the knob to increase or decrease between 0 to 30 psi.

4. CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges ( 3/8" -24UNF thread) into the regulator to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED)

5. ON-THE-GO: A carry handle on the top lid, lightly take your homebrew or bar serve beer anywhere - camping, hiking, BBQ party, fishing trip etc.

Application

1. Enjoy beer with friends and families.

2. Take beer to outdoor, such as BBQ, hiking, beaching etc.

3. A perfect gift for holiday, such as Father's Day, Christmas etc.

Our Company

Beijing Bartool Tech Co., Ltd. is an industry and trade enterprise, which integrated design, developing, production, sales and service. Bartool specialized in production and sales various kinds of double wall vacuum insulated containers, typical application is larger size of double wall beer growlers and beer kegs. With 17 years stainless steel container designing & manufacturing & sales experience, Bartool is proud to be a leading enterprise in cold drinking dispensing industry. Our product range including single and double wall kegs, growlers, cups, portable draft beer/ nitro cold brew coffee dispensing system etc.

FAQ

Q1: Does this have a cooling system or will it fit in the fridge?

A1: It doesn't have it's own cooling system. The best way, is move shelf around in refrigerator and store it in there.

Q2: When you draft your beer it says to have it at 3-5psi. When you are done, do you turn the regulator knob off or leave it at 3-5 psi?

A2: I leave it on to keep the beer properly carbonated, while using the keg system, no need to turn off; after finishing dispensing, it is better to turn off and put in fridge.

Q3: At what pressure is the safety regulator valve regulated?

A3: The CO2 System: 30 PSI, Safety Pressure Regulated. When the pressure within the keg reaches 30 psi, the pressure relief valve will release excessive CO2 automatically.

Q4: Can you use this system for making sparkling wine?

A4: Yes, of course, are you thinking of pouring pre-carbonated wine into it? Wine has a higher carbonation level than beer so the cartridge might not last as long.

Q5: I've been getting a lot of foam when pouring. I even hold glass at a angle. I have it set at 5 psi. Is there anything im doing wrong/ I can correct?

A5: Pls turn off regulator, and pull on Pressure relief valve for a few seconds to optimize the inner pressure, then reset 5PSI, that would work better for you!

Q6: How long does a 16g C02 cartridge last?

A6: As long as it takes to finish the growler - keeps the pressure at desired level throughout. The longest I took was 4 weeks (was 2 weeks out of town) and still held pressure. Once is done, the cartridge does not have have enough CO2 for another fill.