A106 Gr.B EN 1.0405 Seamless Steel Pipe ASTM Hot Rolled

Product Specification

ASTM A106 Gr.B Pipe / Seamless Steel Pipe EN 1.0405 Steel Pipe for Structure

ASTM A106 pipe is the carbon seamless steel pipe that widely used for different industries. For oil and gas pipelines, water transmissions, mineral slurry, boiler and high pressure services, construction and structural.

A106 pipe has three grades: Grade A and Grade B and C, where in most circumstances used for Grade B.

Our Supply Range

Standard: ASTM A106, ASME SA106 (Nace MR0175 also applicable for H2S environment).
Grade: A, B, C
Outer diameter: NPS 1/2”, 1”, 2”, 3”, 4”, 6”, 8”, 10”, 12” up to NPS 20 inch, 21.3 mm to 1219mm
Wall thickness: SCH 10, SCH 20, SCH STD, SCH 40, SCH 80, to SCH160, SCHXX; 1.24mm up to 1 inch, 25.4mm
Range of length: Single Random Length SGL, or Double Random Length. Fixed Length 6 meter or 12 meters.
Ends type: Plain end, Beveled, Threaded
Coating: Black paint, Varnished, Epoxy Coating, Polyethylene Coating, FBE, 3PE, CRA Clad and Lined.

We shall explain from different aspects that why ASTM A106 Grade B pipe has so large requirements in the markets:

ASTM A106 standard specifications

ASTM A106 is the standard specification for seamless carbon steel pipe applied for high temperature services.

Dimensions Schedule Range

The standard covers pipe sizes in NPS (National Standard Straight) from 10.3mm DN6 – 1219mm DN1200 (1/8 inch to 48 inch), complied with ASME B 36.10M. But other sizes out of this B36.10 also could apply the A106 standard.

ASTM A106 Pipe Specifications

Raw materials

ASTM A106 standard raw material is carbon steel, it shall be applicable for bending, flanging or similar forming processes.

Reliant Pipes Products stocks a full range of A106 pipe (SA106 Pipe) in:

• Grades B and C
• NPS ¼” to 30” diameter
• Schedules 10 through 160, STD, XH and XXH
• Schedules 20 through XXH
• Wall Thickness beyond XXH, including:
  – Up to 4” wall in 20” through 24” OD
  – Up to 3” wall in 10” through 18” OD
  – Up to 2” wall in 4” through 8” OD

S/A 106 Grade B specs are listed below. If you’re looking for Grade B-specific product offerings

Scope

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.

NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.

Process

Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.

Steel cast in ingots or strand cast is permissible.

Hot-finished pipe need not be heat treated.

Cold-drawn pipe shall be heat treated after the final cold draw pass.

Standards referred for making ASTM A106 pipes

References ASTM standards:

a. ASTM A530/ A530M This is the standard specification for the common requirements of the carbon, and alloy pipes.
b. E213 The standard for the Ultrasonic Examination test
c. E309 The standard for the Eddy Current examination test

d. E381 The standard for the plan of Macroetch test, for the steel products the steel bars, steel billets, blooms, and forging steels.
e. E570 The standard for the test plan for the flux leakage test of the ferromagnetic steel pipe and pipeline products.
f. Related ASME Standard:

g. ASME B 36.10M The nominal sizes standard specification for the welded and seamless steel pipe.
h. Related Military standard:
i. MIL-STD-129 The standard for the markings of shipment and storage.

j. MIL-STD-163 The standard for the storage and shipment for the steel forging products.
k. Related federal standard:
l. Fed. Std. No. 123 The standard for the civil agencies for the marking and shipments.

m. Fed. Std. No. 183 The standard specification for the continuous ID marking for steel products
n. Surface standard:
o. SSPC-SP 6 The standard specification for the surface.

Chemical composition in %

Carbon (C) Max For Grade A 0.25, For Grade B 0.30, Grade C 0.35
Manganese (Mn): 0.27-0.93, 0.29-1.06
Sulfur (S) Max: ≤ 0.035
Phosphorus (P) : ≤ 0.035
Silicon (Si) Min : ≥0.10
Chrome (Cr): ≤ 0.40
Copper (Cu): ≤ 0.40
Molybdenum (Mo): ≤ 0.15
Nickel (Ni): ≤ 0.40
Vanadium (V): ≤ 0.08

Grade B Seamless Pipe

ASTM A106 standard specifications for the seamless steel pipe have three grades, that is ASTM A106 Gr. A, Grade. B and C, with the higher grade material, the strength performance is better.

Test Methods

The test methods for the ASTM A106 A, B, C are the flattening tests, hydrostatic test, nondestructive electric test, Ultrasonic test, eddy current test, flux leakage test, these test procedures shall be notified or discussed with client to confirm what kind of test will be applied.