JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 20Ton per week |
| Delivery Time | 5 - 12 days based on the quantity |
| Packaging Details | standard packing for export |
| Products | stainless steel strip |
| Thickness | 0.1 - 10.0mm |
| Width | within 1500mm |
| MOQ | 2 Ton |
| Grade | 200 series 300 series 300 series |
| Surface | BA 2B NO.4 HL 8K NO.1 |
| Standard | ASTM EN GB JIS |
| Packing | wooden frame and water proof paper |
| Brand Name | TISCO |
| Model Number | 201 202 301 304 316L 321 310S 410 430 440C |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Bright Anneal 304 Stainless Steel Strip 1/4H 1/2H 3/4H FH Stainless Steel Roll 1
EN 1.4571 Stainless Steel Metal Strip AISI 316Ti Cold Rolled
ASTM A240 Stainless Steel Strip Roll AISI317L EN 1.4438
Heat Resistant 309S Stainless Metal Strips AISI EN 1.4833
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 20Ton per week |
| Delivery Time | 5 - 12 days based on the quantity | Packaging Details | standard packing for export |
| Products | stainless steel strip | Thickness | 0.1 - 10.0mm |
| Width | within 1500mm | MOQ | 2 Ton |
| Grade | 200 series 300 series 300 series | Surface | BA 2B NO.4 HL 8K NO.1 |
| Standard | ASTM EN GB JIS | Packing | wooden frame and water proof paper |
| Brand Name | TISCO | Model Number | 201 202 301 304 316L 321 310S 410 430 440C |
| Certification | ISO | Place of Origin | China |
| High Light | High Hardness cold rolled stainless steel strip ，cold rolled stainless steel strip 416 ，2B steel strip coil | ||
High Hardness 416 Stainless Steel Strip Metal Roll Cold Rolled 2B SS Strip Stainless Steel
Grade 416 is a martensitic machining with machinability enhanced through the addition of phosphorus and sulphur.It has the highest machinability of any stainless steel, at about 85% of that of a free-machining carbon steel. As for most other free-machining stainless steels the improvement in machinability is achieved by addition of sulphur which forms manganese sulphide inclusions; this sulphur addition also lowers the corrosion resistance, weldability and formability to below that of its non-free machining equivalent grade 410.
Grade 416 is sometimes used in the unhardened or hardened and highly tempered condition because of its low cost and ready machinability.
Martensitic stainless steels are optimised for high hardness, and other properties are to some degree compromised. Fabrication must be by methods that allow for poor weldability and usually also allow for a final harden and temper heat treatment. Corrosion resistance is lower than the common austenitic grades, and their useful operating temperature range is limited by their loss of ductility at sub-zero temperatures and loss of strength by over-tempering at elevated temperatures.
| Grades | J1, J2, J4, 201, 202, 301, 304, 304H, 304L , 309, 309S, 310, 310S, 316, 316L, 316TI, 321, 321H, 347, 409, 410, 410S, 420, 430, 441, 904L,2205,2507 |
| Thickness | 0.02mm – 5.0mm |
| Width | 3.2mm – 1500mm |
| Length | AS PER CUSTOMER’S REQUIREMENT |
| Type of Material | STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD,FULL HARD. |
| Test Certificate | Yes. |
| Finish | NO.1, 2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE, SATIN FINISH, NO.8, BA. |
| Make | JINDAL, BAHRU, POSCO KOREA, POSCO THAINOX, COLUMBUS, ACERINOX, APERAM, TISCO, NISSHIN, NIPPON AND MANY MORE MILLS. |
Chemical Composition of 416 Stainless Steel
| Chemical Element | % Present |
|---|---|
| Carbon (C) | 0.06 - 0.15 |
| Chromium (Cr) | 12.00 - 14.00 |
| Manganese (Mn) | 0.00 - 1.50 |
| Silicon (Si) | 0.00 - 1.00 |
| Phosphorous (P) | 0.00 - 0.04 |
| Sulphur (S) | 0.15 - 0.35 |
| Molybdenum (Mo) | 0.00 - 0.60 |
| Iron (Fe) | Balance |
Grade 416 has poor weldability. If welding is necessary use Grade 410 low hydrogen electrodes. Pre-heat to 200-300°C. Follow immediately with annealing or re-hardening, or a stress relief at 650-675°C.
Fabrication must be by methods that allow for poor weldability and usually also allow for a final harden and temper heat treatment.
Heat Treatment
Full Annealing - Heat to 815-900°C for ½ hour per 25mm of thickness. Cool at 30°C per hour maximum to 600°C and air cool.
Sub-Critical Annealing - Heat to 650-760°C and air cool.
Hardening - Hardened by heating to 925-1010°C, quenching in oil, and tempering to suit the mechanical requirements. See accompanying table.
Condition: Tensile Strength Range (N/mm² or MPa) QT 650: 650 - 850
QT 700: 700 - 850
QT 800: 800 - 950
QT 850: 850 - 1000
QT 900: 900 - 1050
Corrosion resistance is lower than the common austenitic grades.
Useful resistance to dry atmospheres, fresh water and mild alkalies and acids, but less resistant than the equivalent non-free-machining grades. Less corrosion resistant than the austenitic grades and also less than 17% chromium ferritic alloys such as Grade 430. High sulphur content free machining grades such as 416 are totally unsuitable for marine or other chloride exposure.
Maximum corrosion resistance is achieved in the hardened condition, with a smooth surface finish.
Products Show
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!