Martensitic Grades 410 420 SS Flat Bar Straightened Annealed

Product Specification

Martensitic Grades 410 420 Stainless Steel Flat Bar Straightened Annealed

Flat steel refers to steel with width of 12-300mm, thickness of 3-60mm, rectangular section and slightly blunt edge. Flat steel can be finished steel, or it can be used as blank for welded pipe and thin slab for laminated thin plate. Main uses: as a finished material, flat steel can be used to make hoop iron, tools and mechanical parts, and used as building frame structural parts and escalators in buildings.

Product introduction:

Mechanical property:

Chemical Composition:

Brand Cross Reference Table:

Surface finish :

Packaging:

Martensitic Grades 410 420 Stainless Steel Flat Bar Straightened Annealed packaging details :

1:Each steel bar has the single protective package and several be bundled togehter ;

2:Stainless steel flat bars will be packaged with protective packing materials

and bundled with strong strips ;

3: Well loaded and be transported to the loading port .

The innner size container as below :

1:20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM ;
2:40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;
3:40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.

Products Show:

Stainless Steel Flat Bar:

Special product specifications. The thickness is 8 ~ 50mm, the width is 150-625mm, the length is 5-15m, and the product specification span is dense, which can meet the needs of users. It can be used instead of medium plate without cutting.

The surface of the product is smooth. High pressure water descaling process is adopted for the second time in the process to ensure smooth steel surface.

Both sides are vertical and the water caltrop is clear. The two pass vertical rolling in finish rolling ensures good perpendicularity, clear angle and good edge surface quality on both sides.

The scale of the product is accurate, with three-point difference, and the difference at the same level is better than the steel plate standard; The product is straight and good plate shape. The finish rolling adopts continuous rolling process and automatic looper automatic control to ensure that steel is not piled up or pulled. The product has high dimensional accuracy, tolerance range, three-point difference, same strip difference, sickle bending and other parameters are better than the medium plate, and the flatness is good. Cold shear, high length sizing accuracy.

WHY CHOOSE US:

Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: FOB, CIF, CFR,

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.