Wuhan Spico Machinery & Electronics Co., Ltd.
| Payment Terms | L/C, T/T |
| Delivery Time | 45~60 Working Days |
| Packaging Details | Standard Export Packing |
| Certification: | UL/FM/NFPA20 |
| Casing： | Ductile Cast iron |
| Engine: | NM Fire |
| Head | 10bar |
| Color | Red |
| Flow | 2000gpm |
| Brand Name | CNP NM FIRE |
| Model Number | SCF250-200-350(UL/FM) |
| Certification | NFPA20/UL/FM/EN12845/CCCF |
| Place of Origin | China |
View Detail Information
Explore similar products
Electric Motor End Suction Fire Pump , Fire Fighting Pump Water Pump 300GPM
NFPA20 Standard Diesel Engine Driven Fire Pump 415 Feet With Air / Water Cooling
Firefighting System Diesel Engine Driven Fire Pump For Water Use 400GPM @ 130PSI
500 GPM End Suction Fire Pump , High Strength Diesel Fire Water Pump 116 PSI
Product Specification
| Payment Terms | L/C, T/T | Delivery Time | 45~60 Working Days |
| Packaging Details | Standard Export Packing | Certification: | UL/FM/NFPA20 |
| Casing： | Ductile Cast iron | Engine: | NM Fire |
| Head | 10bar | Color | Red |
| Flow | 2000gpm | Brand Name | CNP NM FIRE |
| Model Number | SCF250-200-350(UL/FM) | Certification | NFPA20/UL/FM/EN12845/CCCF |
| Place of Origin | China | ||
| High Light | diesel driven fire pump ，diesel powered fire pump | ||
UL/FM Listed Diesel Engine Drive Fire Pump With 2000gpm @ 10bar Horizontal Split case Pump
Pump: Split Case Pump
Model: SCF250-200-350(UL/FM)
Q= 2000usgpm H=10bar n=2980 rpm
Material:
Casing---Ductile Cast iron
Impeller---SS304
Shaft--- AISI 4340
Shaft sleeve---SS304
Seal------ Gland packing
Wear ring----Bronze
Bearing---SKF
Motor: Techtop(UL)
Model: T355M1-2
220KW/50HZ /380V/ 3PH
Control Panel: Eaton (UL/FM)
Model: FD70-300-C-L1-B
The orientation of an HSC fire pump must be predetermined when such a pump is manufactured and installed. The pump must be built for either right-hand (clockwise) or left-hand (counter-clockwise) from the vantage point of the driver. For diesel-driven fire pumps, the pumps can only be operated at a clockwise rotation. Failure to pay attention to this can lead to a pump that must be taken apart then reassembled in the correct rotation in the field (if the pump is driven by an electric motor), or piping that must be rearranged in the case of a diesel engine-driven fire pump. Finally, due to the extra bearings, larger impellers, and overall larger size of the horizontal split-case fire pump, the cost is higher when compared to a pump with a cheaper design. The higher initial cost does afford you a pump that will last longer, and will be easier to maintain or service when compared to other pump types.
Performance Ranges:
|
UL:
|
Q: 500-4000GPM | H:100-190PSI |
|
FM:
|
Q: 500-4000GPM | H:100-190PSI |
|
CCCF:
|
Q:20-500L/S | H:0.42-2.0Mpa |
|
NFPA20:
|
Q: 300-8000GPM | H:60-300PSI |
Application:
The split case pump is available in various designs and manufactured from different materials to suit a wide range of applications. Major components in the pump such as, impellers, casings, wear rings, and shafts can be offered by manufacturers in various materials to suit the fluid hat is being pumped and the site environment conditions.
Large hotels, hospitals , schools,office buildings,supermarkets, commercial residential buildings, metro stations, railway stations, airports, kinds of transportation tunnels, petrochemical plants, thermal power plants, terminals, oil depots, large warehouses and industrial and mining enterprises, etc.
Product Type:
Diesel engine driven fire pump sets with air cooling & water cooling
NFPA20 Package
Advantage:
First-Class international technical standards
NM Fire is the first member of NFPA from Chinese pump manufacturers .
We are the only enterprise in China that obtained not only UL and FM certificates, but CCCF as well,also the first company in the world who was authorized by UL CCIC as witness testing center for both fire pumps and fire fighting engines.
NM fire obtained fire diesel engine UL1247 and fire pump UL448 witnessed laboratory accreditation,fully proved that the company in terms of hardware and software strength,are to meet the
strict requirements of UL certification.
Service:
Pre-service:
1. Any inquiries will be replied within 24 hours.
2. Dedicated to high quality, stable supply and considerate service.
Sale service:
Provide full set of documents as customer’s requirements.
After-Sale Service:
Customiszed production for different package
FAQ:
| 1. To supply high-quality products with reasonable prices in food additive industry. |
| 2. To follow orders and arrange shipping in time, providing complete documents |
| for Customs clearance according to different export policies in different countries. |
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller
Year Established:
2012
Total Annual:
5000000-30000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Wuhan Spico Machinery & Electronics Co., Ltd.（Hereinafter referred to as SPICO） is the Wuhan office of CNP NM Fire-fighting System Co.,Ltd (Hereinafter referred to as NM Fire). SPICO mainly resp- onsible for product promotion，export declaration and foreign exchange co... Wuhan Spico Machinery & Electronics Co., Ltd.（Hereinafter referred to as SPICO） is the Wuhan office of CNP NM Fire-fighting System Co.,Ltd (Hereinafter referred to as NM Fire). SPICO mainly resp- onsible for product promotion，export declaration and foreign exchange co...
Get in touch with us
Leave a Message, we will call you back quickly!