Sonborn Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 5000PCS |
| Delivery Time | 5~8 Workdays |
| Packaging Details | Cartons |
| Copper Ports | 5 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af/at PoE |
| PoE Standard | IEEE 802.3af/at Power over Ethernet |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 65Watts |
| Brand Name | SONBORN |
| Model Number | SN-PSE604G |
| Certification | CE FCC ROHS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
DC52V 30W per port 65W 6 Port Unmanaged PoE Switch (4 Port POE Switch with 2
24 port POE switch IEEE802.3af at Standard 2TP 2SFP Combo uplink switch POE
24 10/100Mbps Fast Ethernet ports POE SWITCH and 2 Gigabit TP/SFP combo ports
2 Gigabit TP/SFP combo ports POE SWITCH and 24 port 10/100M POE SWITCH FOR CCTV
Product Specification
| Payment Terms | T/T | Supply Ability | 5000PCS |
| Delivery Time | 5~8 Workdays | Packaging Details | Cartons |
| Copper Ports | 5 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af/at PoE | PoE Standard | IEEE 802.3af/at Power over Ethernet |
| Power Pin Assignment | 1/2(+), 3/6(-) | PoE Power Budget | 65Watts |
| Brand Name | SONBORN | Model Number | SN-PSE604G |
| Certification | CE FCC ROHS | Place of Origin | CHINA |
6 Port PoE Switch (5 POE Ports +1 Uplink), 802.3af/at PoE 1000Mbps, Built-in Power, Extend to 250Meter, Unmanaged
The SN-PSE604G offers 5 PORT 10/100/1000Mbps RJ45 ports and 1 PORT Gigabit SFP ports. The Gigabit SFP ports can be for 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. SN-PSE604G boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 12Gbps. Its built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.
Technical Specification
|
Hardware Specification | |
|
Copper Ports |
5 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports with IEEE 802.3af/at PoE |
|
SFP/mini-GBIC Slots |
1 1000Base-SX/LX/BX SFP interfaces |
|
Switch Architecture |
Store-and-Forward |
|
Switch Fabric |
12Gbps / non-blocking |
|
Switch Throughput |
8.928Mpps@64 bytes
|
|
Address Table |
8K entries |
|
Share Data Buffer |
4Mbytes |
|
Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
|
LED | System: Power ,PoE In-Use ( yellow) 10/100 LINK / ACT(Green), 1000 LINK ( yellow) |
|
Dimension (W x D x H) |
185*124*44mm , 1U height |
|
Weight |
1 kg |
|
Power Requirement |
100~240V AC, 50-60 Hz |
|
Power Consumption / Dissipation |
65 Watts maximum |
| Power over Ethernet | |
|
PoE Standard |
IEEE 802.3af/at Power over Ethernet / PSE |
|
PoE Power Supply Type |
End-Span |
|
PoE Power Output | Per Port 52V DC, af:350mA. Max. 18.2 Watts at:600mA. Max.31.2 Watts |
|
Power Pin Assignment |
1/2(+), 3/6(-) |
|
PoE Power Budget |
65Watts |
|
PoE Ability | Number of PD @15.4W watts:4
|
| Standards Conformance | |
|
Standards Compliance |
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000Base-T IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet |
Multiple Applications
PoE Applications Explained
PoE Standards
The original PoE standard, known as IEEE 802.3af, allowed 15.4 watts of power to be sent from a switch port. After cable resistance losses, each PD was guaranteed to receive at least 12.95 watts.In 2009, the IEEE 802.3at standard (also known as PoE+) was released, doubling the power per port to 30 watts. More recently, the new IEEE 802.3bt standard (PoE++) was formalized, allowing a massive 90 watts of power.
| PoE Standard | 802.3af (Type 1, “PoE”) | 802.3at (Type 2, “PoE+”) | 802.3bt (Type 3, “4PPoE++”) | 802.3bt (Type 4, “4PPoE++”) |
|---|---|---|---|---|
| Twisted pair cables used | 2 pair | 4 pair | 4 pair | 4 pair |
| Power accessible to PD | 12.95 Watts | 25.5 Watts | 51 Watts | 71 Watts |
| PoE source Max. power delivered | 15.40 Watts | 30.0 Watts | 60 Watts | 90 Watts |
| PoE source Min. input voltage | 44V-57 Volts | 50V-57 Volts | 50V-57 Volts | 52V-57 Volts |
| Maximum current | 350 mA | 600 mA | 600 mA per pair | 960 mA per pair |
The Advantages of PoE Technology
Power over Ethernet (PoE) technology uses network cables to transmit data and power to devices. This means that a single cable can fully support devices such as wireless access points, VoIP phones, IP cameras and IP TV decoders.PoE eliminates the need for power cables and reduces cabling costs.The benefits of PoE include.
Transmitting power and data over cables makes it much cheaper to install a PoE system compared to traditional wiring.PoE also allows for easier and cheaper outdoor installation.
PoE has fewer installation steps and fewer electrical hazards.PoE also reduces the risk of power outages, potential damage to equipment, and electrical overloads.
PoE power supplies and devices are plug-and-play and highly configurable. This makes it easy to add or remove devices without interrupting or disrupting the entire system.
PoE-controlled devices can be disconnected and reconnected to a new PoE system with minimal downtime.PoE systems provide better control for smart buildings and ip-based security systems.
PoE networks can be easily expanded when more devices need to be added in new locations.
What is the difference between IEEE 802.3 af and IEEE 802.3 at?
The difference is the amount of power that can be delivered. IEEE 802.3af supports 15.4 watts over Ethernet cables. IEEE 802.3at can deliver up to 30 watts over Ethernet cables.
How does Power over Ethernet work?
In PoE, Ethernet cables are used to transmit power to the device, and PoE devices require no additional wiring during installation. Initially, PoE was primarily used for Voice over Internet Protocol (VoIP) telephony, which allowed existing IP networks to carry voice data. As PoE became more popular, security cameras became one of the most abundant PoE devices on the market. Later, as wireless connectivity became ubiquitous, wireless access points entered the PoE world.
Does PoE need special Ethernet cable?
No. PoE uses standard Cat 5 Ethernet cables to deliver both power and data.
Do I need PoE or PoE+?
This depends entirely on the type and nature of the PoE device you want to use. The original PoE standard (IEEE 802.3af) allowed 15.4 watts to be sent from a switch port. Taking into account cable resistance, each device was guaranteed to receive at least 12.95 watts. The updated IEEE 802.3at standard (also known as PoE+) doubles the power per port to 30 watts.
Newly powered devices are taking advantage of this advancement and require more power than ever before. Even if your current devices only require the standard power of 802.3af, you should consider the types and requirements of devices you will add in the future.802. This may be a viable path to take!
Company Details
Year Established:
2015
Total Annual:
6000000-10000000
Employee Number:
1~50
Ecer Certification：
Site Member
SONBORN is a specialist provider of integrated high-speed communication network solutions for enterprises, data centres and telecom users. Our unwavering commitment to innovation and improvement is reflected in our product development, quality control, technical support and network solutions. It is ... SONBORN is a specialist provider of integrated high-speed communication network solutions for enterprises, data centres and telecom users. Our unwavering commitment to innovation and improvement is reflected in our product development, quality control, technical support and network solutions. It is ...
Get in touch with us
Leave a Message, we will call you back quickly!