DC 12V Residential Off Grid Solar Power System 1kw 60AH For Camera Electrical

Product Specification

DC 12V Residential Off Grid Solar Power System For Camera Electrical Appliances

1. Composition of photovoltaic system

Photovoltaic power generation is based on the principle of photovolt effect, using solar cells to convert solar light energy directly into electric energy.Whether used independently or connected to the grid, the photovoltaic power generation system is mainly composed of three parts: solar panels (modules), controllers and inverters, which are mainly composed of electronic components and do not involve mechanical parts. Therefore, the photovoltaic power generation equipment is extremely refined, reliable and stable, with long service life and easy installation and maintenance.At present, monocrystalline and polycrystalline batteries are the most commonly used, while amorphous batteries are used in some small systems and auxiliary power supplies for calculators.

Homeuse 220V 1-10KW New

Off Grid Solar Power System For Household Appliances

2. How to work for the power system

The household power generation system is generally composed of a photovoltaic square array composed of solar cell components, a solar charge and discharge controller, a battery pack, an off-grid inverter, a DC load, and an AC load. If the output power is AC 220V or 110V, an inverter is also required.

The photovoltaic array converts solar energy into electric energy when there is light, and the solar charge and discharge controller supplies power to the load while charging the battery pack; when there is no light, the battery pack supplies power to the DC load through the solar charge and discharge controller. At the same time, the storage battery also needs to directly supply power to the independent inverter, and the independent inverter is inverted into alternating current to supply power to the alternating load.

Homeuse 220V 1-10KW New Off Grid Solar Power System For Household Appliances

3. Packaging of photovoltaic systems

Products are sent neutral by default (no manufacturer, LOGO and other information), English instruction, if you need to indicate the manufacturer's information, or brand stickers and other packaging requirements, please leave a message remarks Oh.

Our company has its own mold factory and oil spray factory, such as product customization requirements, or change packaging requirements, can communicate with customer service.

4.Points to Note:

(1) after the solar panel or controller, inverter is connected, it should not be frequently inserted and unplugged;Battery poles must not short circuit, otherwise it will damage the battery;

Strictly avoid short circuit of various household appliances and wires, the installation of solar panel bracket must be firm and stable;

(2) the solar panel must be installed according to the correct azimuth and inclination Angle to avoid dust pollution, and the box body should avoid water soaking;

(3) When the voltage indicator is in the warning area below 11V (red area or hear the alarm sound), it indicates that the battery is not fully charged. It should immediately turn off the switch, stop using, and charge to the normal use area (or green area) above before use (except for the products with automatic control function);

(4) the box body must not tilt, more can not be inverted, so as to avoid electrolyte overflow, damage equipment or injury to the human body;