hanse-john electronic Co.,Ltd.
| Payment Terms | MoneyGram |
| Supply Ability | 1000000 |
| Delivery Time | 25 day |
| Packaging Details | REEL |
| Center Frequency | 1575.42Mhz |
| Insertion Loss(F0±1.2 MHz) | 0.9(TYPE) 1.3(MAX) |
| Ripple Level(F0±1.2 MHz） | 0.1（type） 0.5（max） |
| Attenuation（D.C~1425MHz） | 30dB（min） 35dB（type） |
| Attenuation（1425-1500Mhz） | 38dB (min) 42dB (type) |
| attenuation(1500-1625Mhz) | 42dB(min) 47dB(type) |
| attenuation(1625-1650Mhz) | 40(min) 43(type) |
| attenuation(1650~1725MHz) | 35(min) 38(type) |
| attenuation(1725-1850Mhz) | 35(min) 38(type) |
| attenuation(1850-2000Mhz) | 30(min) 35(type) |
| attenuation(2000-3000Mhz | 30(min) 35(type) |
| VSWR(157.22-1576.62 | 1.2(TYPE) 1.6(MAX) |
| Input-output Impedance | 50ohm |
| Brand Name | HD |
| Model Number | 1575.42MHZ |
| Place of Origin | wuxi |
| Certification | ISO ROHS |
View Detail Information
Explore similar products
HDF1575AB2SP03 15dBm 3000MHz Saw Band Pass Filter
HDBF04620B21-S21 10V 50db Saw Bandpass Filter
TX To RX 1920Mhz To 1980Mhz Saw Bandpass Filter
HDBF04620B21 S21 Baw Saw Filter
Product Specification
| Payment Terms | MoneyGram | Supply Ability | 1000000 |
| Delivery Time | 25 day | Packaging Details | REEL |
| Center Frequency | 1575.42Mhz | Insertion Loss(F0±1.2 MHz) | 0.9(TYPE) 1.3(MAX) |
| Ripple Level(F0±1.2 MHz） | 0.1（type） 0.5（max） | Attenuation（D.C~1425MHz） | 30dB（min） 35dB（type） |
| Attenuation（1425-1500Mhz） | 38dB (min) 42dB (type) | attenuation(1500-1625Mhz) | 42dB(min) 47dB(type) |
| attenuation(1625-1650Mhz) | 40(min) 43(type) | attenuation(1650~1725MHz) | 35(min) 38(type) |
| attenuation(1725-1850Mhz) | 35(min) 38(type) | attenuation(1850-2000Mhz) | 30(min) 35(type) |
| attenuation(2000-3000Mhz | 30(min) 35(type) | VSWR(157.22-1576.62 | 1.2(TYPE) 1.6(MAX) |
| Input-output Impedance | 50ohm | Brand Name | HD |
| Model Number | 1575.42MHZ | Place of Origin | wuxi |
| Certification | ISO ROHS | ||
| High Light | HDF1575M P2 Saw Bandpass Filter ，1575.42MHZ Saw Bandpass Filter ，1575.42MHZ Saw And Baw Filters | ||
1. Features
·SAW filter for GPS.
·High stability and reliability with good performance and no adjustment.
·Narrow and sharp pass band characteristics.
·Low insertion loss and deep stop band attenuation for interference.
·Low – loss SAW filter for GPS.
2. ELECTRICAL SPECIFICATION
| Items | Conditions |
| Operation temperature rang | -30℃ ~ +85℃ |
| Storage temperature rang | -40℃ ~ +85℃ |
| ESD voltage Sensitive discharge device | ESD(MM) : 50VDC ESD(HBM) : 175VDC |
| DC Voltage VDC | 5V |
| Max Input Power | 15dBm 2000h |
| Moisture Sensitivity Level | MSL 2 |
2-1.Electrical characteristics
AT 25℃±5℃
| Items | Test Condition | Min | Typ | Max | Unit |
| Center Frequency | - | - | 1575.42 | - | MHz |
| Insertion Loss | F0±1.2 MHz | - | 0.9 | 1.3 | dB |
| Ripple Level | F0±1.2 MHz | - | 0.1 | 0.5 | dB |
| Attenuation | D.C~1425MHz | 30 | 35 | - | dB |
| 1425~1500MHz | 38 | 42 | - | dB | |
| 1500~1525MHz | 42 | 47 | |||
| 1625~1650MHz | 40 | 43 | - | dB | |
| 1650~1725MHz | 35 | 38 | |||
| 1725~1850MHz | 35 | 38 | - | dB | |
| 1850~2000MHz | 30 | 35 | - | dB | |
| 2000~3000MHz | 30 | 35 | - | dB | |
| VSWR | 1574.22~1576.62MHz | - | 1.2 | 1.6 | - |
| Input/Output Impedance | - | - | 50 | - | ohm |
2-2.Typical frequency response
5. ENVIRONMENTAL CHARACTERISTICS
5-1 High temperature exposure
Subject the device to +85℃ for 16 hours. Then release the filter into the room conditions
for 24 hours prior to the measurement. It shall fulfill the specifications in 2-2.
5-2 Low temperature exposure
Subject the device to -40℃ for 16 hours. Then release the device into the room conditions
for 24 hours prior to the measurement. It shall fulfill the specifications in 2-2.
5-3 Temperature cycling
Subject the device to a low temperature of -40℃ for 30 minutes. Following by a high
temperature of +85℃ for 30 Minutes. Then release the device into the room conditions
for 24 hours prior to the measurement. It shall meet the specifications in 2-2.
5-4 Resistance to solder heat
1,immerge the solder bath at 260℃ for 10 sec
2,the iron at 370℃ for 3 sec)
5-5 Solderability )
Submerge the device terminals into the solder bath at 245℃ ±5℃ for 5s, More than
95% area of the soldering pad must be covered with new solder. It shall meet the
specifications in 2-2
5-6 Reflow soldering
The specimen shall be passed through the reflow furnace with the condition shown in
the above profile for 1 time.
The specimen shall be stored at standard atmospheric conditions for 1h, after which
the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be
glass fabric base epoxy resin.
5-7 Mechanical shock
Drop the device randomly onto the concrete floor from the height of 1m 3 times. the device
shall fulfill the specifications in 2-2.
5-8 Vibration
Subject the device to the vibration for 1 hour each in x,y and z axes with the amplitude of
1.5 mm at 10 to 55 Hz. The device shall fulfill the specifications in 2-2.
6. REMARK
6.1 Static voltage
Static voltage between signal load & ground may cause deterioration &destruction of
the component. Please avoid static voltage.
6.2 Ultrasonic cleaning
Ultrasonic vibration may cause deterioration & destruction of the component. Please
avoid ultrasonic cleaning
6.3 Soldering
Only leads of component may be solded. Please avoid soldering another part of
component.
7. Packing
7.1 Dimensions
(1) Carrier Tape: Figure 1
(2) Reel: Figure 2
(3) The product shall be packed properly not to be damaged during transportation and storage.
7.2 Reeling Quantity
3000 pcs/reel φ 178mm
10000 pcs/reel φ 259mm
7.3 Taping Structure
(1) The tape shall be wound around the reel in the direction shown below.
(2) Label
| Device Name | |
| Marking | |
| User Product Name | |
| Quantity | |
| Lot No. |
(3) Leader part and vacant position specifications.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2008
Total Annual:
400000-1000000
Employee Number:
100~200
Ecer Certification：
Active Member
The company’s main products are frequency components (piezoelectric ceramics, crystals, surface acoustic waves), functional ceramic products The company was established in 2008, develops and produces frequency components. Our products are manufactured in accordance with the ISO9002 stand... The company’s main products are frequency components (piezoelectric ceramics, crystals, surface acoustic waves), functional ceramic products The company was established in 2008, develops and produces frequency components. Our products are manufactured in accordance with the ISO9002 stand...
Get in touch with us
Leave a Message, we will call you back quickly!