1 Gang 1 Way Panel Electrical Wall Switch High voltage 250V 10A

Product Specification

86*86mm Size Mechanic Wall Switch For Light Rocker 1 Gang 1 Way Panel 

Specifications

Product Features

Large modular structure design:

The module size of the original G platform is 52x52mm.

After the upgrade, the size of the H1 universal module is 66x66mm. The buttons are larger than the old model, and it is equipped with HR7 metal frame.

Description

The normal mechanic switch have four categories: one gang switch, two gang switch, three gang switch, and four gang switch; Two types: one way and two way;

One way switch means that one switch controls one light; Two way means that two switches control the same lamp at the same time.

For example, there is a "Corridor light" switch, there is also a "corridor light" switch at the bedside, now we need to control these two different positions of the "corridor light" switch.

For the same lamp, the setting method is as follows:

1. The "Corridor light" switch at the door is associated with the "Corridor light" switch at the bedside: At first, turn off the "Corridor light" switch at the door, press and hold the "Corridor light" button for 20 seconds, and the white indicator light of the button will enter the slow flashing state (1 Flashing once every second), release your hand, and the corresponding lamp will light up (the “Corridor light” switch at the door will only light up when the lamp control line is connected, and it will not light up if it is not connected), and all other buttons of the “Corridor light” switch at the door will automatically turn off the light, and the backlight of the buttons will turn yellow at the same time to start the pairing request. At this time, go to the "Corridor light" switch on the bedside and press the "Corridor light" button on the bedside (if you press the wrong button, you only need to press the button again to cancel, and then press the correct "Corridor light" button), the white indicator light of the "Corridor light" button enters a slow flashing state, and finally, return to the "corridor light" at the door, press the "Corridor light" button, then this button and the button’s indicator light of "Corridor Light" on the bedside will stop flashing and turn off. Wait for 3 seconds to save the settings. During this period, all switches in the room can not be operated.

2. The "Corridor light" switch on the bedside is associated with the "Corridor light" switch at the door: press and hold the "Corridor light" button on the bedside for 20 seconds until the button indicator flashes slowly. The rest of the setting methods are the same as point 1. The 2-way setting is completed.

Functions

1. Connection according to connection diagram

2. Dissemble the frame

3. Dissemble the right and left key cover and expose the hole for fix.

4. Put the screw into the hole and screw in with torque 0.2-0.4N.m (2.0-4.0kgf.cm) fixing the switch

5. Assemble the key cover and frame

No need to dissemble key cover under following condition:

1. Fix hole is exposed out of key cover.

2. Using additional hole to fix

 

 

 

 

Advantages

 

(1) Mutual benefit : We are factory also have more than 10 years experience in manufacturing and developing of switches and sockets.

(2) Customize : We have strong R&D team, we will try our best to custom product as your request.

(3) OEM service : (a) Printing your Logo (b) Engraving words or icons

(4) Mix order : We accept mix order, different model and small quantity order.

 

 

FAQ

 

1. Q:What’s the shipping method?

A: By express way. Such as Fedex, DHL, TNT and so on; by air or by sea. Shipping cost is decided by shipping ways and product’s actual weight and volume, also your detailed address.

2. Q:Can we print our own brand or logo on your products?

A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM requirements.

3. Q: Why do some goods have difference between website picture and practical items?

A: Because difference of light and browser, also different batches, materials may be little difference, such as lining. Sometimes, the picture is for reference only. These are allowed in actual case. If any question, please tell us before order and ask clearly.

4. Q: Can I order one piece for sample or trial order less than MOQ to test the quality?

A: Yes, We recommend to check the sample before order. We accept trial order less than MOQ.

5. Q: If I order big quantity, what's the good price?

A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.

 

If you have another question, please feel free to contact us.