24V Home Smart Thermostat , 5 conjoined Knx Room Thermostat

Product Specification

Home / Hotel Smart Thermostat KNX 24 Voltage Small Module Panel 

Specifications

Product Features

1. Power supply: Low voltage 24V
2. Power: less than 1W;
3. Working temperature: -10℃～55℃;
4. Temperature sensor: using NTC sensor;
5. Setting temperature range: 16～30℃, temperature control accuracy: 1℃;
6. Temperature correction range: -6℃～6℃, resolution 1℃;

Description

The KNX switch panel needs to be connected by the control system. The control panel is mainly used in the building control system. It is installed as a system together with other devices on the bus, and the function is simple and intuitive. Users can plan and execute these functions systematically according to their needs.

The control panel is a standard 86 bottom box installation, Connect to the EIB / KNX system through the EIB bus, and use the engineering design tool software ETS software (version ETS4 and above) to allocate the physical address and group address and set the parameters.

The control panel is directly connected to the bus through the terminal block and requires 24V DC auxiliary power supply. Each channel of the panel can use the various functions described above and are independent of each other.

Functions

1. When the thermostat is turned on, there is no operation within 3 minutes, the screen is black and does not display, the button indicator is in a glimmer state; When there is a button action, the screen resumes to light, and the button indicator is in a highlighted state.

2. After the thermostat is turned off, only the switch button indicator is in the glimmer state, and the other button indicators are all off. When there is a button action, all the button indicators are in the highlighted state. There is no button operation within 3 minutes, the indicator is off.

3. On/Off button:

①For products only with air conditioner or floor heating or fresh air, press this button to turn off the thermostat. Press again to turn on it.

②For two-in-one and three-in-one products, in any interface, press and hold the key for 5 seconds to turn off the thermostat, and press the key again to turn on the thermostat. In the air conditioner interface, press this key to turn on or off the air conditioner; In the floor heating interface, press this key to turn on or off the floor heating; in the fresh air interface, press this key to turn on or off the fresh air.

4. Mode key: In the air conditioning interface, press this key to switchover between cooling, heating and ventilation modes, and it will work only in the air conditioning interface;

5. Function Key: Press this button to switchover between air conditioning, fresh air and floor heating interface.

6. Fan speed key: Adjust the fan speed when in the air conditioning or fresh air interface;

7. △/▽ Key: Adjust the set temperature value when in the air conditioning or floor heating interface;

8. Icon: When the air conditioning, floor heating, or fresh air are turned on, it will display “ON”, and when it is turned off, it will display “OF” off;

9. Fresh air intake and ventilation icons: It will be on and off at the same time, divided into 2 or 3 gears, in the fresh air interface, you can use the combination key  to configure whether the fan speed is 2 gears (only connect H and M) or 3 gears ( Connect to HML).

 

 

 

Advantages

 

(1) Mutual benefit : We are factory also have more than 10 years experience in manufacturing and developing of switches and sockets.

(2) Customize : We have strong R&D team, we will try our best to custom product as your request.

(3) OEM service : (a) Printing your Logo (b) Engraving words or icons

(4) Mix order : We accept mix order, different model and small quantity order.

 

 

FAQ

 

1. Q:What’s the shipping method?

A: By express way. Such as Fedex, DHL, TNT and so on; by air or by sea. Shipping cost is decided by shipping ways and product’s actual weight and volume, also your detailed address.

2. Q:Can we print our own brand or logo on your products?

A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM requirements.

3. Q: Why do some goods have difference between website picture and practical items?

A: Because difference of light and browser, also different batches, materials may be little difference, such as lining. Sometimes, the picture is for reference only. These are allowed in actual case. If any question, please tell us before order and ask clearly.

4. Q: Can I order one piece for sample or trial order less than MOQ to test the quality?

A: Yes, We recommend to check the sample before order. We accept trial order less than MOQ.

5. Q: If I order big quantity, what's the good price?

A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.

 

If you have another question, please feel free to contact us.