WUHAN RADARKING ELECTRONICS CORP.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 6000000 pcs/year |
| Delivery Time | 15-20 working days |
| Packaging Details | Standard Packing in Carton |
| Name | Wireless Din Rail STS Prepaid Meter |
| Mounting | 35mm DIN |
| Latch Relay | Build-in |
| Accurac y | CL 1.0 |
| Dimension | 155*120*52mm |
| Communication | LoRa, RF, PLC |
| Brand Name | Radarking |
| Model Number | RDK DDSK150 |
| Certification | IEC, STS |
| Place of Origin | China |
View Detail Information
Explore similar products
Smart STS Prepaid Meters BS Mounting Keypad Prepayment With Customer Interface
Three Phase Keypad STS Prepaid Meters 3P With LCD Display / PLC Communication
Split Three Phase STS Prepaid Meters PLC Communication Keypad Prepayment Meter
Keypad Prepaid Electricity Meter , 3 Phase 4 Wire Energy Meter For Residential
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 6000000 pcs/year |
| Delivery Time | 15-20 working days | Packaging Details | Standard Packing in Carton |
| Name | Wireless Din Rail STS Prepaid Meter | Mounting | 35mm DIN |
| Latch Relay | Build-in | Accurac y | CL 1.0 |
| Dimension | 155*120*52mm | Communication | LoRa, RF, PLC |
| Brand Name | Radarking | Model Number | RDK DDSK150 |
| Certification | IEC, STS | Place of Origin | China |
| High Light | Smart Prepaid Meters ，Prepaid Power Meter | ||
Single Phase Split STS Prepaid Meters Din Rail Power Meter With CIU Pole Mounting
The DDSK150 operates with a 35 mm Din Rail mounting and pole mounting accessories.
Thanks to a broad range of current allowance 5(80)Amp and the rugged RF withstand of 30 Vm, the meter is able to work in very harsh environments.It is ideal for submetering and tenants environments..
The DDSK150 consists of two parts. A customer interface unit (CIU), and a metering and control unit (MCU). A CIU is a keypad based display, to be installed within consumers homes wherever there is a plug point. A MCU is the main meter, installed away from consumer's home in a kiosk, meter box or a pole-mounted enclosure .MCU communicates with CIU via wireless communication such as Power Line Carrier (PLC), Radio Frequency(RF), and LoRa. This non-wired setup allows for easy inspection by utility and service providers at any time without visiting consumers' houses and reduces the chance of fraud by tampering.
Major Features
a) Critical metrological value measurement: V, A, PF, P, etc
b) Trip on no credit or preset balance level
c) Disconnect on tamper detected
d) Meter allows setting for power limit, emergency credit, debt collection, surchages, etc
e) Uni-directional measurement for reverse energy( SRE )
f) Anti-fraud features
g) Multi-rate and usage registered as Time of Use (TOU)
User Benefits
1) Quick and easy installation with no need of accessories
2) Reduce operational and inventory cost
3) Two way communication with AMR AMI server(on request)
4) Flexible payment control through various element settings
5) Meter provides information by inputting short codes
Specifications:
| Nominal voltage Un | 220/230/240 V |
| Limited voltage | 70%~120%Un |
| Nominal frequency fn | 50-60Hz+5% |
| Basic current(Ib) | 5-10A |
| Maximum current(Imax) | 60-100A |
| Starting current(Ist) | 20mA |
| Active energy constant | 1000imp/kWh |
| Accuracy as Active energy to IEC62053‐21 | Class1.0 |
| Power consumption in Voltage circuit | <2W <8VA |
| Power consumption in current circuit | <1VA |
| Operating temperature | 25℃ to+70℃ |
| Storage temperature | 40℃ to+85℃ |
| Insulation level | 4kV rms for 1min |
| Impulse voltage withstand | 8kV, 1.2/50 μs |
| Air discharge | 16kV |
| Immunity to HF fields | |
| 80MHz to 2GHz with load | 10V/m |
| 100kHz to 1GHz without load | 30V/m |
| Fast transient burst test | 4kV |
| Meter shell Protection Rate | IP54(IEC60529) |
| Insulation System Classification | Protective Class II |
Safety precautions:
- Use only isolated tools.
- Do not connect the meter to a 3 phase - 415V AC - network.
- Place the meter only in dry surroundings.
- Make sure the used wires are suitable for the max current the meter can measure.
- Make sure the AC wires are installed correctly before activating the current/voltage.
- Do not touch the meter connecting clamps directly with your bare hands, with metal, blank wire or other material as you will have the chance of an electricity shock and a possible chance for health damage.
- Make sure the protection cover is placed after installation and has been sealed.
- Installation, maintenance and repair should only be done by a certified electrician.
- Never break the seals or open the front cover as this might influence the functionality of the meter.
- Do not through, drop, kick or other physical violence to the meter as there are high precision components inside that will break or make the meter measure inaccurate.
- Do not mount the meter in area's with harm gas, dust, mildew or insects or on unstable surfaces.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2002
Total Annual:
10000000-15000000
Employee Number:
100~200
Ecer Certification：
Active Member
Introduction： Wuhan Radarking Electronics Corp. is a modern share enterprises which focusing on the smart Internet of things(IOT) /smart grid energy consumption sensor/intelligent electric safety integrated solution. It established in 2002（former name: Wuhan Radarking Co.,Ltd.）and went publ... Introduction： Wuhan Radarking Electronics Corp. is a modern share enterprises which focusing on the smart Internet of things(IOT) /smart grid energy consumption sensor/intelligent electric safety integrated solution. It established in 2002（former name: Wuhan Radarking Co.,Ltd.）and went publ...
Get in touch with us
Leave a Message, we will call you back quickly!