4000mm Mechanical Bar Screen

Product Specification

China High Efficiency Mechanical Coarse Bar Screen Rake Screen Water Treatment In Wastewater Treatment

Brief Introduction

Located in Yixing, an advanced and beautiful city of Jiangsu Province, China, Longdai Co., Ltd is a processing equipment supplier of petrochemical industry specialized in environmental processing &integrating independent research and development, design, general contracting, environmental protection equipment manufacturing, and relevant material supply.

Parameters

Application

The equipment can arbitrarily adjust the operation interval of the equipment according to the needs of users to realize periodic operation; it can be automatically controlled according to the liquid level difference between the front and rear of the grid; and it has a manual control function to facilitate maintenance. Users can choose arbitrarily according to different work needs. Due to the reasonable structural design of the equipment, it has a strong self-purification ability when the equipment is working, and there will be no blockage, so the daily maintenance workload is very small.

Structure and Working Principle

The equipment adopts a back-down type and a rotary chain type. The water grid surface is composed of a toothed rake plate and a fixed bar. When the sewage flows through, the debris larger than the bar space is intercepted, and the rake teeth of the toothed rake plate penetrate the gap of the bar. When the driving device drives the traction chain to make a rotary movement, the rake teeth bring the debris trapped on the grid surface from bottom to top to the slag outlet. When the rake teeth rotate from top to bottom, the debris relies on gravity to move on its own and fall into the conveyor from the discharge port, and then be transported or further processed.

Main Features

1. The driving device is directly driven by a cycloidal pin wheel or a helical gear reducer motor, which has the characteristics of low noise, compact structure and stable operation;

2. The rake teeth are of oblique tip type and are welded into a whole with the horizontal axis, which can pick up large garbage and sundries;

3. The rack is an integral frame structure, with strong rigidity, easy installation and less daily maintenance work;

4. The equipment is easy to operate, and the operation of the equipment can be directly controlled locally/remotely;

5. In order to prevent accidental overload, it is equipped with double protection of mechanical shear pin and overcurrent to make the equipment operation safe and reliable;

6. A secondary grille is set at the bottom. When the toothed rake turns from the back of the main grille to the front side, the secondary grille is automatically attached to the main grille to prevent the flow of water from short-circuiting and flowing into floating debris.

Water Flow Chart

Outline and Installation Chart

1. Motor Mount 2. Tooth Rake 3. Rack 4. Bottom Trash Rack 5. Guide Device 6. Driving Device 7. Slag Baffle 8.Bar Screen

Why Choose Us?

1. Longdai has more than 10 years of experience in wastewater and sludge treatment.

2. We introduce German technology, thus our product is much better than other Chinese manufacturers.

3. We only use the best parts from best supplier.

4. We have our own R&D center and complete manufacture system.