Skymen Technology Corporation Limited
| Payment Terms | T/T |
| Supply Ability | 800 pcs per month |
| Delivery Time | In Stock |
| Packaging Details | Wooden case |
| Model | JP-2288G |
| First tank volume | 960L |
| First tank size | 1200X1000X800mm |
| Transducers | 288pcs; 144pcs of every tank |
| Ultrasonic Power | 14400W; 7200W of every tank |
| Heating Power | 48000W; 24000W of every tank |
| Filtration Cycle System | Connected with 1st tank |
| Frequency | 28/40KHz |
| Brand Name | Skymen |
| Model Number | JP-2288G |
| Certification | RoHS, CE, FCC, SGS |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
Twin tank 28khz ultrasonic cleaner for aircrafts parts marine engine fuel
28KHz / 40KHz Industrial Ultrasonic Cleaner 99liter 1500watts for Auto Parts
Industrial ultrasonic cleaner with digital heating and timer ultrasonic power
28/40Khz Ultrasonic Glass Cleaner 77l Each Tank Cleaning Tank And Drying Tank
Product Specification
| Payment Terms | T/T | Supply Ability | 800 pcs per month |
| Delivery Time | In Stock | Packaging Details | Wooden case |
| Model | JP-2288G | First tank volume | 960L |
| First tank size | 1200X1000X800mm | Transducers | 288pcs; 144pcs of every tank |
| Ultrasonic Power | 14400W; 7200W of every tank | Heating Power | 48000W; 24000W of every tank |
| Filtration Cycle System | Connected with 1st tank | Frequency | 28/40KHz |
| Brand Name | Skymen | Model Number | JP-2288G |
| Certification | RoHS, CE, FCC, SGS | Place of Origin | Shenzhen, China |
| High Light | ultrasonic cleaning device ， ultrasonic washing machine | ||
1000L large Dual Tanks Ultrasonic Cleaner 14400W For Boiler, Pump 28/40KHz
Same series with different size:
| Model | Size of every tank | Tank Volume | Ultrasonic Power | Heating Power | Transducer |
| L*W*H (mm) | (L) | (W) | (W) | (pcs) | |
| JP-2024G | 500X300X250 | 38L*2 | 600W*2 | 1500W*2 | 24pcs |
| JP-2036G | 500X350X300 | 53L*2 | 900W*2 | 1500W*2 | 36pcs |
| JP-2048G | 550X400X350 | 77L*2 | 1200W*2 | 3000W*2 | 48pcs |
| JP-2060G | 550X450X400 | 99L*2 | 1500W*2 | 3000W*2 | 60pcs |
| JP-2072G | 600X500X450 | 135L*2 | 1800W*2 | 4500W*2 | 72pcs |
| JP-2096G | 700X500X500 | 175L*2 | 2400W*2 | 6000W*2 | 96pcs |
| JP-2120G | 800X600X550 | 264L*2 | 3000W*2 | 6000W*2 | 120pcs |
| JP-2144G | 1000X600X600 | 360L*2 | 3600W*2 | 9000W*2 | 144pcs |
| JP-2216G | 1000X900X600 | 540L*2 | 5400W*2 | 18000W*2 | 216pcs |
| JP-2288G | 12000*1000*800 | 960L*2 | 7200W*2 | 27000W*2 | 228pcs |
Specification
| Model | JP-2216G |
| 1st Tank Volume | 540L |
| 2nd Tank Volume | 540L |
| First tank size | 1200X1000X800mm |
| Second tank size | 1200X1000X800mm |
| Transducers | 216pcs 50W of every transducer, 108pcs of every tank |
| Ultrasonic Power | 10800W 5400W of every tank |
| Heating Power | 36000W 18000W of evey tank |
| Frenquency | 28KHz/40KHz |
| Filtration Cycle System | 1 set |
| Generator | 4 set |
| Unit size | 2850*2150*1250mm |
| Packing size | 2910*2210*1370mm |
| Timer | 0~99 minutes adjustable |
| Heater | Room temperature~99℃ adjustable |
| Material | SUS 304 default, can be SUS 316 |
| Power Supply | AC 220V 3 phase ; AC 380V 3 phase |
| N.W. | 650G |
| G.W. | 700KG Wrapped by film in wooden case |
| Lead time | 18 working days |
| Warranty | 1 year warranty period, technique support all time |
| Certificates | CE, RoHS, FCC, SGS |
| Advantage | Filter the dirty water; keep the water clear in tank; lower the frequency of changing water |
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
Instruments with movable parts should be disassembled to facilitate cleaning
Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
Set the control panel per manufacturers’ instructions and start the cleaning process
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.
Images:
Clean effect:
Application:
Service line, Electron line, Medical & Surgical instrument, Laboratory, Machine line, Horniness alloy line, Chemistry line.
Industry and mining enterprise, universities, collegesand institutes scientific research unit laboratory; Hospital; Electronic workshop assembly line; Clock and watch eyeglasses shop,jewelry; Jeweler's shop, Family. you will use ultrasonic cleaner for everywhere.
Clean Items: Electronic products, mechanical hardware fitting,eyeglasses, jewelry, clock and watch, coins, fruit and so on. Jewellery, Shaver Heads, Toothbrushes, Waterproof Watches ,Glasses Motor Parts,Ink Cartridges,
Machine Nozzles ,Chiropody Instruments ,Laboratory parts
Coins ,Pen Heads ,Printer Heads ,Printed Circuit Boards Veterinary Instruments
History:
Skymen Cleaning Equipment Shenzhen Co., Ltd., was founded in 2007,which follows the brand development strategy of “based in Shenzhen, radiating throughout the country, expanding overseas”.
Skymen also owns a professional R&D team to keep the pace with international ultrasonic technology. A passionate and young sales team sell to the world through different channels.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
7,000,000-10,000,000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ... Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ...
Get in touch with us
Leave a Message, we will call you back quickly!