Skymen Technology Corporation Limited
| Payment Terms | Western Union, L/C, T/T, Paypal |
| Supply Ability | 600 sets per month |
| Delivery Time | In Stock |
| Packaging Details | packing by box or wooden case; the packing size decides by the machine |
| Price: | nogotiation |
| Model | JTM-1018 |
| Material | SUS304 |
| Warranty | 1 year |
| Frequency | 22kHz |
| Custom made | transducer box size |
| Feature | Hard Cr+ plating |
| Brand Name | Skymen |
| Model Number | JTM-1018 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Ultrasonic Extraction Equipment Transducer Box SUS304 Hard Cr For Cleaning Mold
40kHz Immersible Ultrasonic Transducer Box 1800W Waterproof Submersible
Skymen Ultrasonic Transducer SUS304 Generator Circuit Board Cleaning 22kHz
300W SUS Ultrasonic Immersible Transducer 40Khz For Injector Carbon Deposit
Product Specification
| Payment Terms | Western Union, L/C, T/T, Paypal | Supply Ability | 600 sets per month |
| Delivery Time | In Stock | Packaging Details | packing by box or wooden case; the packing size decides by the machine |
| Price: | nogotiation | Model | JTM-1018 |
| Material | SUS304 | Warranty | 1 year |
| Frequency | 22kHz | Custom made | transducer box size |
| Feature | Hard Cr+ plating | Brand Name | Skymen |
| Model Number | JTM-1018 | Certification | CE |
| Place of Origin | China | ||
| High Light | Cleaning Parts Submersible Transducer ，1800W Generator Submersible Transducer ，Skymen Immersible Ultrasonic Transducer | ||
Skymen Immersible Ultrasonic Transducers Box/Plate With Generator 1800W For Cleaning Parts
Ultrasonic technology extraction is beyond any previous technical feasibility, access to efficient extraction, more effective than heat extraction resident agency regulations, and shortens the extraction time, most of the material before the process is to be extracted within 10min.
Packing & delivery details:
| Packing , loading, delivery time | |
| Packing unit | 1set/wooden case |
| Packing method | Export wooden case |
| Loading port | Shenzhen |
| Delivery time | About 15 working days |
| Minimum Order Quantity | 1set |
| Transport method | By express company / air / sea |
Transducer pack Specifications:
| Model (JTM models) | JTM-1006 | JTM-1012 | JTM-1018 | JTM-1024 | JTM-1030 | JTM-1036 | |||
| Ultrasonic transducer box size (mm) | L | 305 | 355 | 406 | 500 | 550 | 500 | ||
| W | 250 | 305 | 305 | 355 | 406 | 460 | |||
| H | 100 | 100 | 100 | 100 | 100 | 100 | |||
| Housing material | SUS304/SUS316L | ||||||||
| Surface finishing | Hard-Cr plating treatment (20+microns) | ||||||||
| Ultrasonic frequency | 28KHz / 40KHz | ||||||||
| Ultrasonic transducers | 6pcs | 12pcs | 18pcs | 24pcs | 30pcs | 36pcs | |||
| Ultrasonic power | 300W | 600W | 900W | 1200W | 1500W | 1800W | |||
| Electronic generator | KG300 | KG600 | KG900 | KG1200 | KG1500 | KG1800 | |||
| Ultrasonic generator work separately control transducers | |||||||||
| power suppy | AC 110V/220V or 220/240V, 1,13AMP | ||||||||
| *Custom made:68KHz/80KHz/120KHz and size are all available | |||||||||
Features:
Original BLT type transducer
SUS stainless steel housing Hard-Cr plating Treatment ( 20 + microns )
Adaptable for continuous operation
Adjustable ultrasonic power
With separate control ultrasonic electronic generator
Custom made size is available
Transducer no./transducer box: range[6pcs~40pcs per box]
Ultrasonic power: range[300W~2000W]
Ultrasonic frequency: 28KHZ/40KHz
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. many solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.
The ultrasonic cleaner uses ultrasonic waves (vibration) using water with detergents or enzymatic products to break up soil and organic material on medical instruments/devices. These devices are rinsed then autoclaved (sterilized). The autoclave sterilizer uses heat, steam, and pressure to kill all pathogenic microorganisms and their spores.
Package Includes:
1 x Ultrasonic Transducers Plate
1 x Generator
1 x Manual
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
7,000,000-10,000,000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ... Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ...
Get in touch with us
Leave a Message, we will call you back quickly!