Beijing Siriusmed Medical Device Co., Ltd.
| Payment Terms | T/T |
| name | Medical equipment test tool-- G08, general-purpose gas Flow Analyzer |
| keyword | siriusmed ventilator |
| Warranty: | 1 Year |
| Instrument classification | Class I |
| Widely usage range | Suitable for anesthesia machine and ventilator |
| Accuracy | 3% of reading or 0.5 cmH2O |
| Brand Name | R |
| Model Number | G08 |
| Place of Origin | China |
View Detail Information
Explore similar products
G08 Gas Simulator Analyzer Medical Ventilator Parts Engineer Tool Highly
Heated Respiratory Humidifier For Ventilator
Air Tube Medical Ventilator Parts Europe Standard Connecting Oxygen Cylinder
Medical Equipment Icu Ventilator Parts Air Tube German Standard
Product Specification
| Payment Terms | T/T | name | Medical equipment test tool-- G08, general-purpose gas Flow Analyzer |
| keyword | siriusmed ventilator | Warranty: | 1 Year |
| Instrument classification | Class I | Widely usage range | Suitable for anesthesia machine and ventilator |
| Accuracy | 3% of reading or 0.5 cmH2O | Brand Name | R |
| Model Number | G08 | Place of Origin | China |
| High Light | general purpose gas flow analyzer ，medical ventilator gas flow analyzer ，medical ventilator parts gas flow analyzer | ||
Introduction
The Flow Analyzer Go8, referred to hereafter as the Analyzer, is a general-purpose gas flow analyzer. The Analyzer measures
unidirectional gas flow, airway pressure and high pressure. The Analyzer can also measure tidal volume, inspiratory peak pressure, positive
end-expiratory pressure, etc.
This manual provides a description of the Analyzer and its applications. lt should be used as a guide when using the instrument to analyze ventilators and test lungs.
Key Features
Unidirectional flow rate, airway pressure, low pressure, high pressure and oxygen concentration measurement
Flow, pressure real-time waveform display
Touch buttons control
RS232 serial port and can be used for flow calibration
Intuitive interface, easy to operate
Easy to carry
Unpacking and inspection
Use the following checklist when unpacking the Analyzer. There are no special unpacking instructions, but be careful not to damage the instrument when unpacking it.
Check the shipping carton is in good condition. lf the shipping carton is damaged, carefully continue unpacking the instrument and note any dents and scratches on the Analyzer. Save the damaged shipping carton and packing material for the carrier inspection.
lf there is no shipping damage, continue removing the Analyzer from the shipping case. Save the box and packing materials.
Perform a visual inspection to ensure that the Analyzer is intact and if there is any physical damage, such as bent or broken parts, dents, or scratches. If the Analyzer has been damaged, call the theSiriusmed Service Center immediately.
After unpacking the Analyzer, check to see if all of the standard accessories listed under the packing list have been included with the analyzer. if anything is missing, contact the Siriusmed ServiceCenter.
| Operating Environmental Conditions | |
| Temperature Range | 10 - 40 °c |
| Ambient Humidity | 0- 80 %non-condensing |
| Barometric Pressure | 520-800 mmHg |
| Storage Environmental Conditions | |
| Temperature Range | -25 to 50°℃ |
| Humidity | 0 -95 % non-condensing |
| Power Requirements | |
| lnput Voltage Range | 12V DC |
| Power Consumption | 36 VA |
| Flow Port | |
| Flow Range | 0 -200 LPM |
| Accuracy | 3% of reading or 0.1 LPM |
| Resolution | 0.01 LPM flow <5 LPM;0.1 LPM flow >5 LPM |
Notes
Flow accuracy is specified for dry air or oxygen.
Do not use with humidified gases.
Flow accuracy is obtained by allowing the Analyzer to fully warm up.
| Airway Pressure | |
| Pressure Range | 0 - 100 cmH2O |
| Accuracy | 3 % of reading or 0.5 cmH2O |
| Resolution | 0.1 cmH2O |
| High Pressure | |
| Operating Pressure Range | 0 - 690 kPa |
| Accuracy | 2 % of reading or 5 kPa |
| Resolution | 0.1 kPa |
| Barometric Pressure | |
| Operating Pressure Range | 120 - 860 mmHg |
| Accuracy | 2 % of reading or 5 mmHg |
| Resolution | 1 mmHg |
| Gas Temperature | |
| Temperature Range | 0 - 70 °C |
| Accuracy | 2 %FS |
| Resolution | 0.1 °C |
| Oxygen Concentration(Optional) | |
| Range | 0 - 100 % |
| Accuracy | 2 %FS |
| Resolution | 0.1 °C |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Trading Company,Seller,Other
Year Established:
2013
Total Annual:
20000000.00-80000000.00
Employee Number:
140~200
Ecer Certification：
Verified Supplier
We're a manufacturer that specializes in Anaesthetic and ICU Ventilator machines in Beijing China. Beijing Siriusmed was established in 2013, our R&D department and a lot of colleagues got more than 10 years of experience with medical devices, such as Anaesthetic and I... We're a manufacturer that specializes in Anaesthetic and ICU Ventilator machines in Beijing China. Beijing Siriusmed was established in 2013, our R&D department and a lot of colleagues got more than 10 years of experience with medical devices, such as Anaesthetic and I...
Get in touch with us
Leave a Message, we will call you back quickly!