Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 5 Sets Per Month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Pressure range | 1～150kN |
| Pressure accuracy | ±1%FS |
| Pressure resolution | 0.01KN |
| Pressure holding time | ≥100h |
| Crush speed | 0.1-40mm/s |
| Speed resolution | ≤0.01mm/s |
| Displacement | 0～400mm |
| Displacement accuracy | ±0.1mm |
| Brand Name | Sinuo |
| Model Number | SN554B-15T |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
| Payment Terms | T/T | Supply Ability | 5 Sets Per Month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Pressure range | 1～150kN | Pressure accuracy | ±1%FS |
| Pressure resolution | 0.01KN | Pressure holding time | ≥100h |
| Crush speed | 0.1-40mm/s | Speed resolution | ≤0.01mm/s |
| Displacement | 0～400mm | Displacement accuracy | ±0.1mm |
| Brand Name | Sinuo | Model Number | SN554B-15T |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Nail Penetration Battery Crush Test Chamber ，150KN Battery Crush Test Chamber ，Computer Control Battery Crush Test Chamber | ||
IEC 62133 Battery Crush And Nail Penetration Test Chamber 150KN with computer control
Standard:
Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a)
IEC62133-2012, IS0 12405-4:2018, etc.
Features:
1. The test software has a voltage acquisition function: according to the test requirements of the single battery, until the battery shell breaks or the battery is short-circuited (the internal voltage of the battery becomes 0V), the battery voltage change during the test will be automatically collected. When the voltage is zero, the equipment automatically stops the test.
2. According to the test requirements of the power battery: the test system can first squeeze to 30% of the size of the battery module (i.e., the deformation). Or set a certain pressure value (such as the extrusion force is 20kN). When the extrusion test reaches the set force value and the set pressure holding time is also reached, the equipment stops the test.
3. The sample can be tested according to any of the three conditions of pressure, deformation, and voltage.
4. The three test modes can be used as control variables for any combination of conditions. That is, three or two test conditions can be set at the same time. If any one of the conditions is met, the device will stop the test.
5. The test system can display the speed during the test. The test speed required for the test can also be set in the computer software.
6. The computer operating system is processed in the windows dialog box. The table mode can be planned by yourself. The test data is recorded throughout the process. It provides saving, comparison and tracking functions.
7. The dedicated test control motherboard can record force, displacement and voltage at the same time. The control motherboard will send instructions to the computer in real time, and the control interface will record and monitor the extrusion force, temperature, voltage, speed and deformation in real time. It is convenient to generate reports or export data directly. The control motherboard is easy to operate.
8. During the test, the test function can be controlled by collecting voltage signals. The voltage will change during the battery test. Enter a specified voltage value in the test system, and the system outputs a signal. The extrusion test stops when the set voltage value is reached.
Technical parameters:
| User battery cell size | Maximum size (length x width x height): 225*185*160mm, weight: 18kg-20kg |
| Test space | 1000×1000×1000mm (width, depth and height) |
| Dimensions | 1300×1400×2000mm (width, depth and height, subject to actual design) |
| Equipment structure | Box-type structure |
| Smoke exhaust port | Smoke exhaust port is 150mm in diameter |
| Test hole | A 50mm hole is opened on each side |
| Control method | Remote computer control, distance ≥10m |
| Drive method | Electric cylinder drive |
| Pressure range | 1～150kN |
| Pressure accuracy | ±1%FS |
| Pressure resolution | 0.01KN |
| Pressure holding time | ≥100h can be set |
| Crush acupuncture speed | 0.1-40mm/s (adjustable) |
| Speed accuracy | 0.1mm/s~5mm/s, accuracy ±0.05mm/s; 5mm/s~40mm/s, accuracy ±0.1mm/s |
| Speed resolution | ≤0.01mm/s |
| Displacement | 0～400mm |
| Displacement accuracy | ±0.1mm |
| Steel needle |
1) Specifications: φ3mm, φ4mm, φ5mm, φ6mm, φ7mm, φ8mm 2) Length: L=200mm 3) Material: Stainless steel 4) Angle: 45°~60° 5) Quantity: 2 each
|
| Crush needle direction | Crush and acupuncture from top to bottom |
| Crush head |
R75*750mm semi-cylinder, easy to disassemble.
|
| Flat crush head |
With a flat crush head
|
| Needle fixture | |
| Force display | Computer display |
| Sensor resolution | 1／10000 |
| Unit conversion | Kgf, N, kN |
| Temperature acquisition system | Temperature acquisition range 0～+1000℃ |
| Temperature resolution: 0.1℃ | |
| Temperature measurement accuracy: ±0.5℃ | |
| Temperature acquisition channel: 2 channels | |
| Temperature acquisition frequency: 100ms | |
| Voltage acquisition system | Voltage acquisition range: 0~100V |
| Voltage acquisition accuracy: ≤±0.5%FS | |
| Resolution: 10mV | |
| Voltage acquisition channel: 1 channel | |
| Voltage sampling frequency: 100ms | |
| Sampling line length | 2m |
| Acquisition frequency | ≥50Hz |
| Cutoff condition | Pressure, voltage and deformation can be set separately and monitored simultaneously. The test can be stopped as long as any one or more variables reach the set value. |
| Power | 25KW |
| Power Supply | 380V |
| Weight (approx.) | 800kg |
Environmental Requirements:
1. Main power leakage circuit breaker: AC380(1±10%)V (50±0.5)Hz three-phase four-wire + protective ground wire. Install 10㎡ wire, 3P 63A leakage protection switch
2. Power cable: one five-core cable (four-core cable + protective ground wire), about 3 meters long (outside the box)
3. Installation site:
① The ground is flat and well ventilated;
② No strong vibration around the equipment;
③ No strong electromagnetic field around the equipment;
④ No flammable, explosive, corrosive substances and dust around the equipment;
⑤ Avoid direct sunlight or high temperature and humidity;
⑥ The ground load-bearing capacity of the site: not less than 650kg/m2 (prerequisite: the channel size around the equipment is ≥ 600 mm; the load weight is ≤ 500kg);
⑦ There is appropriate space for use and maintenance around the equipment:
⑧ There should be space around the equipment for at least one person to pass through, i.e. ≥600mm;
⑨ There should be space for the equipment door to open and close normally. And there should be no other objects in front of the equipment door.
4. Environmental conditions: Temperature: 20℃±5℃; Relative humidity: ≤85%RH; Atmospheric pressure: 80kPa～106kPa
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!