Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 sets per month |
| Delivery Time | 15 days |
| Packaging Details | Plywood Case |
| Pull Force Gauge | 0-10N.m |
| Push Force Gauge | 0-10N.m |
| Material | Aluminum |
| Accuracy | ±0.3%F.S |
| Lifting Mechanism | 0-100mm |
| Minimum Scale | 0.1N.m |
| Frame | Aluminum profile production |
| Force Arm | Height gauge pre-measurement |
| Brand Name | Sinuo |
| Model Number | SN995 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60061-3 Lamp Caps and Holders Gauges for Control of Interchangeability and
Thermal Durability Test Led Testing Equipment Large Luminaires Temperature Aging
IEC 60598-1 PLC Control Led Testing Equipment Luminaries Adjusting Devices 360°
IEC 60598-1 Cu and Zn Test Chain Short-circuit Protection for SELV Parts
Product Specification
| Payment Terms | T/T | Supply Ability | 30 sets per month |
| Delivery Time | 15 days | Packaging Details | Plywood Case |
| Pull Force Gauge | 0-10N.m | Push Force Gauge | 0-10N.m |
| Material | Aluminum | Accuracy | ±0.3%F.S |
| Lifting Mechanism | 0-100mm | Minimum Scale | 0.1N.m |
| Frame | Aluminum profile production | Force Arm | Height gauge pre-measurement |
| Brand Name | Sinuo | Model Number | SN995 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 10N.M Lamp Bending Moment Test Equipment ，Lamp Bending Moment Test Equipment | ||
IEC 62560 Lamp Bending Moment Test Equipment Push and Pull Force Gauge 0-10N.M
Product Information:
It is conforming to IEC 62560 clause 6.2, IEC 60598-1clause 4.14.2, Mainly used to detect the bending moment of a semi-luminaire intended to be connected to a screw or bayonet socket due to its own weight.to Test the bending moment of the lamp in the lamp holder. The device adopts aluminum profile frame, imported push-pull force meter and precision linear guide rail. It has beautiful appearance, stable movement and small clearance to ensure accurate test.
Technical Parameters:
1. Push and Pull Force Gauge 0-10N.m, Minimum scale 0.1N.m, accuracy±0.3%F.S
2. Lifting mechanism:0-100mm, Linear guide, manual turntable；
3. The bending moment and the weight of the lamp itself are shown in Table 2.
4. Force arm: Height gauge pre-measurement
5. Frame: Aluminum profile production
Test Principle:
As structure figure below : Supporting the lamp head through the thin metal piece on the left ,use pull and push gauge hang the top of the lamps, Shake the lift handle, make the push-pull gauge gradually rise to the level of the lamp, record the pull and push gauge’s display data , This force value is multiplied by the force arm (the distance from the support point on the left side of the lamp to the connection point on the right side of the lamp) is the bending moment applied by the lamp to the lamp holder. This bending moment shall be less than the value specified in Table 2. Note: The weight of the lamp itself should not exceed the weight given in Table 2.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!