Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Test strength range | 0-10KN |
| Force measurement accuracy | 0.001Kg |
| Test width | 400mm |
| Test stroke | 900mm |
| Load analysis | 1/250000 |
| Load accuracy | ±0.5% |
| Speed range | 0.001-1000mm/min |
| Force value unit | N, KN, Kgf, Lbf |
| Brand Name | Sinuo |
| Model Number | SNB02C-10KN |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Test strength range | 0-10KN | Force measurement accuracy | 0.001Kg |
| Test width | 400mm | Test stroke | 900mm |
| Load analysis | 1/250000 | Load accuracy | ±0.5% |
| Speed range | 0.001-1000mm/min | Force value unit | N, KN, Kgf, Lbf |
| Brand Name | Sinuo | Model Number | SNB02C-10KN |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Computer Control Tensile Strength Test Machine ，10KN Tensile Strength Test Machine ，Deformation Tensile Strength Test Machine | ||
10KN Tensile Strength Test Machine With Computer Control Tensile Strength And Deformation Test
Product information:
This machine adopts computer control, widely used in the mechanical properties of various materials test, with special fixture is also suitable for all kinds of finished products tensile, compression, stripping, shear, tear, bending (folding) test. It can print a number of data, according to different data to make graphic output comparison, high control precision, easy to operate; Modular design, a variety of accessories variety, flexible collocation.
Control software introduction:
1.Software operating system language: English.
2. Force value unit: N, KN, Kgf, Lbf
3. Length unit: mm, cm, inch can be freely converted
4. Control mode: computer software to set speed, set load break (rupture), running time and other control modes
5. Type of curve: load-displacement, load-time, displacement-time. Stress-strain, strain-time, stress-time. The vertical and horizontal coordinates of the curve can be set arbitrarily.
Technical parameters:
1. Test strength range: 0-10KN, 0-500N double channel sensor
2. Force measurement accuracy: 0.001Kg
3. Switch units: Kg, N, Lb
4. Load analysis: 1/250000
5. Load accuracy: ±0.5%
6. Force measurement display accuracy: 0.001Kg
7. Displacement measurement display accuracy: 0.001mm
8. Equipped with: large deformation extensometer
9. The machine has two-level control buttons for emergency stop, fast and slow up and down movement, which can be operated through software and control unit
10. Deformation measurement range: 0.2%-100%FS
11. Test stroke: 900mm (including fixture)
12. Test effective width: 400mm
13. Speed test range: 0.001-1000mm/min stepless speed regulation
14. Transmission system: using servo motor, Taiwan ZPT ball screw, computer software TM2101
15. Safety device: overload emergency stop device, up and down travel limit device, automatic breakpoint stop function
Computer configuration: new laptop compatible with Windows 11, equipped with at least Intel i7 or equivalent processor.
16. Test fixtures:
- 10 kN capacity mechanical wedge-type tensile grip set with interchangeable jaws capable of gripping flat specimens with a thickness between 0 and 12 mm and cylindrical specimens with a diameter between 4 and 12 mm, equipped with V-jaw inserts.
- 5 kN capacity side-acting grip set with interchangeable jaws.
- 10 kN capacity compression grip set with a minimum upper diameter of Ø120 mm and a lower diameter of at least Ø200 mm. The upper compression grip must have a spherical free form for centering.
- Three-point bending test set according to ISO 178 with an adjustable lower support between 10 and 180 mm and a 5 mm radius lower support and bending tip.
17. Working power: AC220V 50HZ
18. Working power: 1.0KW
19. Machine weight: about 150kg
Working conditions of the testing machine:
1. In the range of room temperature 10℃-35℃, the relative humidity is not more than 80%;
2. Install correctly on a solid foundation or workbench;
3. In a vibration-free environment, leave no less than 1m space around;
4. No corrosive media around;
5. The fluctuation range of the power supply voltage should not exceed 10% of the rated voltage.
Configuration list:
| 1. Testing machine host | A Set |
| 2. Servo motor | A Set |
| 3.High quality and high precision load sensor | Two PC |
| 4. Deceleration system | A Set |
| 5. Taiwan ZPT ball screw | A Set |
| 6. Fixtures | A Set |
| 7. Large deformation measurement system | A Set |
| 8. TM2101 measurement software | A Set |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!