Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month |
| Packaging Details | Plywood |
| Temperature Range | Ambient temperature～200℃ |
| Control Accuracy | ±0.5℃ |
| Temperature Rising Rate | 5℃±2℃/minute |
| Temperature Distribution | ±2.0℃(non-load) |
| Control Method | PLC & touch screen |
| Working Volume | Can be customized |
| Brand Name | Sinuo |
| Model Number | SN556 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 20 Sets Per Month |
| Delivery Time | 1 Month | Packaging Details | Plywood |
| Temperature Range | Ambient temperature～200℃ | Control Accuracy | ±0.5℃ |
| Temperature Rising Rate | 5℃±2℃/minute | Temperature Distribution | ±2.0℃(non-load) |
| Control Method | PLC & touch screen | Working Volume | Can be customized |
| Brand Name | Sinuo | Model Number | SN556 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | battery charge discharge test equipment ，high frequency vibration generator | ||
IEC62133 Battery Case Stress Thermal Impact Testing Equipment 200℃ Air Circulating Oven
Overview:
The battery thermal impact test equipment, also called the battery thermal abuse test chamber, adopts a hot air circulation system by simulating a battery placed in a forced-air high temperature chamber, raising the temperature to a preset test temperature and maintaining a certain time at a certain heating rate. It can ensure even distribution of working temperature.
Standards Compliant:
It is conforming to standard of IEC62133:2017 clause 7.2.3, 7.3.5, IEC62133:2012 clause 7.3.5, 8.2.2, 8.3.4, IEC61960, IEC60086-4 clause 6.5.7, IEC 60086-1 etc.
Technical Parameters:
| Temperature range | Ambient temperature～200℃ (controllable) |
| Control Accuracy | ±0.5℃ |
| Distribute Temp. | ±2.0℃(non-load) |
| Temperature rising rate | 5℃±2℃/minute (RT～150℃) |
| Control Method | PLC Touch Screen Control |
| Working room dimension | W600mm×D500mm×H600mm |
| External Dimension | W940X D780 X H1620mm |
| Inner Chamber Material | Stainless steel, clean and smooth internal chamber, easy for cleaning, with high corrosion resistance performance. All internal material with environment friendly material, inter barrel with no trace argon arc welding |
| External Chamber Material | Steel plate, powder painted (thickness1.5mm) |
| Bottom | Installed with casters |
| Observation Window | Toughened glass with bursting disk. |
| Insulation Material | High density glass wool, well insulation, best ensure the temperature insulation. With high temperature resistant silicon seal, long time bear high temperature above 300 degrees. |
| Power Source | AC 220V ±10%,50HZ or 110V, 60Hz (can be customized) |
| Heating Power | About 3KW |
| Touch Screen Monitoring Picture | |
Air Supply System:
1. Forced Air Conveying circulation design. The air source generated by circulation motor driving the wheel and force the air pass through the heater to convey the hot air into the drying chamber while the used air can be inhaled to the air channel as the air source and be heated again. This way is taken to reduce the energy loss and assure the temperature in uniform distribution in the chamber. If any disturbance of door open or close, this air conveying and circulation system can recover the operational temperature value in a short time.
2. Long axis high temperature resistant motor, power 1HP50Hz
3. Blower with multi impeller turbo type, high strength, inner installed with adjustable air flow plate, make the air channel smoothly.
Features:
1. External chamber is made of steel plate with powder paint treatment; Inner chamber is made of stainless steel.
2. High temperature resistant long axis motor.
3. Turbo-fan.
4. Silicon sealing parts.
5. Over-temperature protection, over loading auto power cut off system.
6. Cycling system: forced flat air cycling.
7. Heating system: PID+S.S.R.
8. Temperature controller: PID micro-computer control, automatic constant temperature, quick temperature compensation function.
9. Time function: when temperature reach the setting temperature, alarm for cut off power.
10. Glass observation windows optional, customize according to customer requirements.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!