Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T, L/C, Western Union, MoneyGram |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 20 Days |
| Packaging Details | Plywood |
| Control Mode | Non-PLC |
| Chamber Structure | Panited stainless steel plate |
| Combustion Gas | Butane or Propane |
| time Resolution | 0.1s |
| Brand Name | Sinuo |
| Model Number | SN773 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60587 8kv AC DC High Voltage Tracking Index Test Chamber
IEC 60695-2-2 Needle Flame Flammability Test Chamber Touch Screen
IEC 60335 Glow Wire Flammability And Temperature Test Apparatus With PLC Control
IEC60950-1 2005 1mL/Min Hot Flaming Oil Test Device Flammability Test
Product Specification
| Payment Terms | T/T, L/C, Western Union, MoneyGram | Supply Ability | 10 Sets Per Month |
| Delivery Time | 20 Days | Packaging Details | Plywood |
| Control Mode | Non-PLC | Chamber Structure | Panited stainless steel plate |
| Combustion Gas | Butane or Propane | time Resolution | 0.1s |
| Brand Name | Sinuo | Model Number | SN773 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | flame test chamber ，flammability testing equipment | ||
IEC 60695-11-5 Needle-flame Testing Method Small Flame Simulation Fire Hazad Test Appratus
Overview:
This needle flame test is used to simulate the effect of small flames that may arise in malfunctioning electrical equipment.
The burner which produces the 12 mm high test flame shall consist of a tube at least 35 mm long with a bore of 0.5mm±0.1mm and outer diameter not exceeding 0.9mm. The burner is supplied with butane or propane gas having a purity of at least 95%. There shall be no air admitted to the burner tube. To evaluate the possibility of spread of fire, for example by burning or glowing particles falling from the test specimen, a layer of the material or components normally surrounding or situated underneath the test specimen and the surrounding material or components when the test specimen is mounted as in normal use.
The test flame is positioned so that the tip of the flame is in contact with the surface of the test specimen. The test flame is removed after the specified time.
If the test specimen drips molten or having flaming material during the application of the flame, the burner may be tilted up to 45°from the vertical to prevent material from dripping into the burner tube while maintaining an 8mm±1mm spacing between the centre of the top of the burner and the remaining portion of the test specimen, ignoring any strings or molten material.
Standards:
IEC60695-11-5
IEC 60695-2-2
Technical Parameters:
| Control mode | Button operation + romote controller |
| Display mode | Precious digital meters |
| Chamber Structure | Stainless steel plate with high-grade paint |
| Button switch | Top grade button |
| Combustion gas | Butane or propane gas, purity ≥ 95% |
| Flame application time | 0-9999.9s can be preset |
| Flame duration | 0-9999.9s display, automatic recording |
| Time resolution | 0.1s |
| Flame temperature rising time | From 100℃ ± 2℃ to 700℃ ± 3℃ ( room temperature～ 999℃ ) ,23.5s±1.0s (1s ～ 999.9s) |
| Flame height | 12mm ± 1mm ( ajustable ) |
| Combustion angle | 0°, 20°, 45° (adjustable ) |
| Needle burner | Stainless steel,bore diameter:Φ 0.5mm ± 0.1mm,outer diameter ≤Φ 0.9mm ,length≥35mm |
| Copper block | The copper block material is specified as : Cu-ETP UNS C11000 (see ASTM-B187). The diameter of the copper block shall be 4mm 0.01mm with a mass of 0.58g 0.01g in the fullu machined and polished but undrilled state. |
| Thermocouple | Imported Omega brand Φ 0.5 armour nickel-chromium / nickel aluminum wire K type thermocouple, temperature resistance 1100°C |
| Temperature sensing delay | 1.7S |
| Test space | ≥ 0.5m³, black yogon background |
| Dimensions | L1100mm × W530mm × H1150mm ,Exhaust aperture:Φ100mm； |
| Power supply | 220V /50Hz, 0.5kVA (110V, 60Hz or other power supply can be customized) |
| Standard | IEC60695-11-5, IEC 60695-2-2 |
Application:
This needle-flame tester is applicable to testing electrical equipment, its sub-assemblies and components, as well as solid electrical insulation materials or other combustible materials, such as lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance, electric motor, electric tools, electronic instruments, electrical instruments, electrical connector, rubber, plastic materials and etc.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!