Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 10 Sets / Month |
| Delivery Time | 30 days |
| Packaging Details | Standard Exporting Plywood Case |
| Standard Applied | IEC 62196-1 2020 |
| Clause Applied | Clause 26.3, fig 19 |
| Drop Height | 1000mm |
| Drop Times | 8 times |
| Rotating Angle | Every 45° |
| Operation Method | Manual release |
| Brand Name | Sinuo |
| Model Number | SN2129 |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 Sets / Month |
| Delivery Time | 30 days | Packaging Details | Standard Exporting Plywood Case |
| Standard Applied | IEC 62196-1 2020 | Clause Applied | Clause 26.3, fig 19 |
| Drop Height | 1000mm | Drop Times | 8 times |
| Rotating Angle | Every 45° | Operation Method | Manual release |
| Brand Name | Sinuo | Model Number | SN2129 |
| Certification | Calibration Certificate(cost additional ) | Place of Origin | China |
| High Light | Rewireable Plugs Drop Testing Equipment ，IEC 62196-1 Drop Testing Equipment | ||
IEC 62196-1 Rewireable Plugs and Vehicle Connector Drop Testing Equipment
Product information:
This testing device is required by IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19.
It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable.
Test principle: The free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both having a total length of 2,25 m, is fixed to a wall at a height of 1 m above the floor.
The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45° at its fixing each time.
Technical parameters:
1. The height of dropping:1000mm
2. Dropping times:8
3. Rotating angle:45°, it can be rotated in all sides.
4. Size:L*W*H 2300*500*860mm
| Drop height | 1000mm |
| Dropping times | 8times |
| Rotating angle | 45°, it can be rotated in all sides |
| Equipment size | L*W*H 2300*500*860mm |
| Conforms to standard | IEC 62196-1Ed.4CDV 2020 clause 26.3, fig 19. |
Test procedures (Excerpt from IEC 62196-1Ed.4CDV 2020 clause 26.3):
Non-rewirable plugs and vehicle connectors are tested with a small section (approximately 200 mm) of the flexible cable as delivered.
The free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both having a total length of 2,25 m, is fixed to a wall at a height of 1 m above the floor, as shown in Figure 19.
The sample is held so that the cable is horizontal and then it is allowed to fall on to a concrete floor. This is done eight times; the cable being rotated through 45 ° at its fixing each time.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!