Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 100 Sets / Month |
| Delivery Time | 15 days |
| Packaging Details | Carton Box |
| Standard Clause | IEC60884 Clause 14.2 |
| Test Sample | Plug pins |
| Load Weight | 100N |
| Steel Rod | Φ4.8mm |
| Test Time | 1 minute |
| Frame Material | Stainless steel |
| Brand Name | Sinuo |
| Model Number | SN2114 |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100 Sets / Month |
| Delivery Time | 15 days | Packaging Details | Carton Box |
| Standard Clause | IEC60884 Clause 14.2 | Test Sample | Plug pins |
| Load Weight | 100N | Steel Rod | Φ4.8mm |
| Test Time | 1 minute | Frame Material | Stainless steel |
| Brand Name | Sinuo | Model Number | SN2114 |
| Certification | Calibration Certificate(cost additional ) | Place of Origin | China |
| High Light | switch endurance tester ，switch life testing machine | ||
IEC 60884-1 Clause 14.2 Figure 14 Device for Testing Non-Solid Pins
Product information:
The appliance is checked by the test of IEC60884-1 clause 14.2, figure 14, for checking pins which are not solid whether can withstand the sufficient hardness.
Technical parameters:
| No.: | Specifications |
| Load weight | 100N |
| Steel rod | Φ4.8mm |
| Time for force application | 1 minute |
| Equipment material | Stainless steel |
Test process:
1. When using the instrument for the first time, horizontal position adjustment is needed, first place the tester in a horizontal table, and adjust the four feet of the tester, until the horizontal bubble is in the center position.
2. A force of 100 N is exerted on the pin, which is supported as shown in figure 14, last 1 min in a direction perpendicular to the axis of the pin, the force is applied by theΦ4.8 mm steel rod, the axis of which is also perpendicular to the axis of the pin.
3. During the application of the force, the reduction of the dimension of the pin at the point where the force is applied shall not exceed 0.15 mm.
4. After removal of the rod, the dimensions of the pin shall not have changed by more than 0.06 mm in any direction,
5. The equipments should be cleaned and maintained after completing the test.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!